Main renamed the switch so that an old "coop = 1" turns nothing on; the launcher's check for Steam's library still read the old name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every Play ran steamlib.ensure on the Tk thread, co-op on or off. Without the file that walks up to 60,000 folders
of the player's Steam libraries and checks signatures, and the window stood still meanwhile. Play and the Steam
shortcut's start now call it only when co-op is on in the game's settings (steamlib.wanted, read as the game reads
them), and Play runs it on a thread of its own and starts the game from the window's thread when it is done.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The job (main+0x415300) hands the time manager's step to the sound system in its phase 0 and runs the sound objects'
and the system's updates in phases 1 and 2. With the set ostep that step is a fraction of a frame above 60 fps, and fed
fractions the game has been reported to keep sounds held after an area unloaded until no voice was free, new sounds
and then the music going silent until a restart. The new set osound (sound_steps, on by default) calls the page's
+0xf10 after the job's prologue: phase 0 adds the step to what the job is owed and runs once a whole step has built
up, phases 1 and 2 follow that choice, and a job that does not run gets phase 3, which returns through its own
epilogue. After phase 0's load of the step the page's +0xf00 makes a fraction one whole step. At 60 fps and below
the job runs every frame with the game's step. Both sites were checked against the module; frame_step_check covers
the gate at 60, 30, 144 and 240 fps. Needs the game code generated again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every interactive floor of a place and both water managers ask frame_rate_sim_host once an update, each for its own
object. With 8 slots, a place with more such objects than that had them take each other's slot in turn, start
without a remainder every update and stand still above 60 fps, as before the set owater. The table now has 64 slots,
as the ripples' has, and frame_step_check runs 32 surfaces at 144 fps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Deku Tree's floating platform is not one of the engine's ground groups, and where its position lives is not known.
With floor_scan set (off by default), once Link has been carried at 60 fps for 30 frames with the left stick at rest,
one snapshot of the game's heap and alias regions keeps every float triplet near him; 30 frames later the triplets
that moved as far as he did are kept, and from then on each frame logs the twelve of them farthest from him with their
addresses, positions and moves. The snapshot logs how long it took.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-op loads steam_api64.dll from beside ocarina.exe, and the repository may not hold that file. Before Play and before a start from the Steam shortcut, when the file is not there, launcher/steamlib.py now copies one: one a release ships in its bin folder if it has one, else the newest one in the games of the player's own Steam libraries that Valve signed (WinVerifyTrust and the signer's name) and that has every call runtime/steam.c uses. Nothing is downloaded, the search takes a second or two once, and with no Steam or no suitable file the game starts as before and the Co-op tab says what is missing. The tab's two texts about the file say so in the four languages.
Checked: four new tests on made-up library folders (too old, unsigned, too deep, a second library, a shipped file first, none said once) and the launcher's 190 tests pass; on this PC the search found 40 files in 1.2 s, 25 suitable, and copied a Valve-signed one; that file's library version, an older one than the game was run with, signs in as app 480 and makes a lobby in a program without the game. Not run: Play in the launcher itself with this change.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Up to four players, each in their own game and save, meet in a room. Rooms are Steam lobbies and the games talk through Steam's networking, so nobody forwards a port and nobody runs a server. The game signs in to Steam as its test app (480), so Steam shows the player as playing Spacewar. Off by default; the menu has a Co-op tab with Create a room, Join a room by its ID, Invite a friend, the players, chat and Leave, in English, Russian, Brazilian Portuguese and Simplified Chinese.
runtime/steam.c loads steam_api64.dll from beside the exe at run time and declares the C functions it calls itself; nothing of the Steamworks SDK is in the repository, and a player copies the file from a Steam game they have. runtime/coop.c is the room: the lobby's owner is the host, lets games of the same protocol and game build in and lists them, and every game takes positions, chat and progress only from the players on that list. runtime/coop_game.c reads Link from the Player actor and shares progress, items, songs and quest items through the game's own flag routines, each value only ever raised; small keys, rupees, ammunition and hearts stay each player's own, and the save is copied to coop-backup before anything of a room reaches it. The other players show as a name with a distance where their Link stands, projected with the upscaler's camera.
One Steam account cannot be in a lobby twice, and this PC has not the memory for two games, so the room and the game side were run with one game and tests/coop_peer.py as the second player over runtime/coop_local.c, a stand-in for Steam on 127.0.0.1 that only the environment turns on: the peer was let in, saw the game's Link in Hyrule Field, chat went both ways, the save was copied, one flag the save lacked was set and a flag the game does not share was refused. On Steam itself one game signed in as app 480, made a room, showed its ID and the player's Steam name on the Co-op tab and left. Not run: two Steam accounts in one room, an invite, a join by room ID over Steam, a host that leaves, a removal, and the menu's text probe on this build.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The manager there holds 5345 entries, which the 512 cap skipped. The probe now checks the entries' range once a present
and copies them and the rows of the groups they name (those in the guest heap) with mem_copy_readable, which takes one
lock and no system call per read; the cap is 16,384 again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The physics' two water managers and the game's interactive floor simulation (the Deku Tree's ground webs) step their
surfaces in fixed steps of 1/60 s, as many whole steps as the frame's time holds, and drop the fraction, so every
frame shorter than 1/60 s ran none and the surfaces stood still above 60 fps. The new set owater (water_steps, on by
default) calls the page between the division and the game's cut, which keeps the fraction per object; at 60 fps the
count is the game's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The hidden beta shared story progress through a relay a player had to run and never showed the other players. A new co-op replaces it. Gone are runtime/coop*.c and their headers, the menu's Co-op tab and its texts in four languages, tools/coop_relay.py, the co-op tests, docs/coop.md, the [coop] section of nx2navi.ini.example, the --probe-coop mode, the coop trace item, and Monocypher, which only this layer used.
The old settings stay known as retired keys, so an nx2navi.ini that still sets them logs no unknown key, and they stay on the list of private settings, so a bug report keeps a room's secret, a relay's address and a name out. The platform layer's UDP sockets and fs_save_snapshot stay for the new co-op; cfg_ini_now and fs_profile_path, which nothing else called, are removed.
Checked: the game builds and starts, the menu shows its four tabs, --probe-cfg and --probe-fs pass, and the launcher's private-settings test passes. tests/save_share_check.py builds without its co-op stub; it cannot run from this worktree because the folder's path is longer than Windows allows, on main too.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The patch set text_speed scales the typewriter speed of a message the game lets the player skip (fast, three times as
fast, its scripted waits as long) or runs the game's own skip on the first frame of each page (instant). Messages the
game marks unskippable, such as those that turn their page on a timer, keep the game's speed. The setting is live and
has a row on the Game tab in all four menu languages; with it at normal the set is off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A released texture now goes once nothing has used it for three minutes (six for content only the GPU made), measured
in wall seconds from a clock of the presents. In two players' sessions the game took released textures back within a
minute of the release or never, so the hold drops nothing it would ask for again. The size bound stays as the safety
net for a burst of area changes, and young textures may pass it, up to twice it, while the card and the system's
commit have room. vram_use defaults to low, which now means this hold; high turns it off and keeps the released
textures up to the bound as before, and balanced reads as low. The old low's values stay available as their own keys.
The reuse log line counts drops past the hold and splits its ages around it. tests/tex_release_check checks the rules
and the clock, and simulates sessions shaped by the logs against the old and new defaults.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The cache kept the first eight sizes and formats for the whole run and refused every other one, so after a few
window, resolution or DLSS mode changes the stand-in's blit of a new size was left out, while the old sizes' images
stayed. A new size now takes a free entry or the one used longest ago, whose image goes through the deferred
destruction after the tonemap pass drops its views of it (vk_tonemap_forget), before another image can take its
handle. tests/scratch_lru_check.py checks the choice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every VMA allocation is counted under the file that made it until it is freed, so the new "mem: by owner" line
splits the device-local memory the driver reports into textures (live, GPU-drawn, idle, released, released too
lately to drop), pools and VRAM mirrors, upscalers, replay buffers, uniform snapshots, the device address table,
the ASTC decoder, present and post-processing, headroom spares, the free space inside VMA's blocks and what VMA
never allocated. "mem: host" gives the host-visible allocations, the process's commit and working set and the
game's heap. "vk: released textures" counts take-backs by how long the texture was released and textures made
again after a drop by a bound or a pressure, with the drop's reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The stance site called page +0xf50, which the 0.10.0 line gives the water ripples above 60 fps: the second
registration ends every 1.1.1 start with "registered twice", the sprint button off included. It calls +0xf30 now, and
the comments say which slots the other sets hold. The set's switch is NX2NAVI_SPRINT_BUTTON_PATCH, not a name another
open request uses for a set of its own.
The stand-still timings count 60 Hz frames (frame_step_frames), so a toggled sprint no longer ends on a short stop at
high frame rates. A press is decided at its start for its whole length: kept from the game and the sprint's when it
begins in gameplay (B: while Link moves), else the game's alone, so a held B is not handed to the game half way and a
B that closes the pause menu starts no sprint. A sprint switched off with the button setting does not come back by
itself, Link's state is read only where the memory is readable, and the row, nx2navi.ini.example and the controls
page say that B is the jump under the game's Swap Jump Controls and name the button without assuming the layout.
tests\sprint_check.py covers the press latch, the menu press, 240 fps and the switch-off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The limit was only checked when a file was read, all or nothing, so a run could write a file the next start then
dropped whole. On an RTX 5080 (0.9.2) pipeline-cache-play.bin reached 524.9 MB in one session and the next start began
empty; pipeline-cache.bin grows 14-28 MB at each fold and crosses 512 MB within a few sessions. Now a fold is made only
when its result fits, and a cache past the limit is not saved again, so the file keeps its last save under the limit.
Unset, the limit is the RAM / 32 between 512 and 4096 MB (512 on 16 GB as before, 2048 on 64 GB), which on that PC
took boot hits from 14 to 84 % and left no pipeline to background builds.
Taken into the 0.10.0 line with its conflicts resolved: the line had raised the limit to 1024 MB and says why in
the comment above cache_data_read, in nx2navi.ini.example and in AUDIT.md; those texts keep that reason and give the
RAM-based default, whose floor the next commit raises to match.
The worker, the thread that reads the build's output and the window all change a job while the window draws it. A
step could be read with a new state and the value before it, the output's lines could change while they were
copied, and the change counter was incremented without a lock although the window learns from it that the job
ended. Every change and the counter now take the job's lock, and the job screen and the command line copy the steps
under it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A part left by a download of other bytes under the same name was resumed, and the result failed its sha256 check
as if the download were damaged. A note beside the part now names the file it belongs to by the expected sha256;
a part of another file is deleted with a log line and the download starts over, and the same file is still resumed
from another server.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A file called after a device, ending in a dot or a space, or holding a colon was unpacked into the device, under
another name or as a hidden stream, and the game missed it without a word. On Windows the archive is now refused
with the file's name and the reason; elsewhere such names pass as before.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Windows and the build tools stop at 260 characters for a file's whole path, and a built game needs up to 128 below
its folder. A deeper folder made the build stop in the middle with a file "not found"; Begin Installation and the
install job now refuse it first and name both lengths.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The window asked whether the game runs before the player picked the save, so the game could start during the dialog
or during the backup's copy and mount a save that was half replaced. The import now takes profile/instance.lock as
the game does: a running game refuses it, and a game started in the middle is turned away by its own lock.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A disk that filled in the middle ended a download after four tries with an error that named no cause, and an unpack
with half a folder. The rest of a download, the build tools with their unpacked size, an update's archive and a
mod's zip are now measured against the free space first, and the refusal says how much is needed and how much is
free; a disk that fills during a download is named as full at once.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The total was "length + have or size or 0", which is the part file's size when a resumed answer names no length:
the bar ran past its end. It is now the expected size, else the server's length plus the part, else unknown.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game and the launcher each read nx2navi.ini, change their own lines and put a new file in place, so of two
changes in the same moment the second dropped the first. The mods' switches already refused while the game runs;
the Discord Status switch of the Settings screen now does too, and says to use the game's menu.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The window's close ends the process under the detached threads, so a dump file the flight recorder's thread was
writing stayed cut short under its own name. Its three files are now written as .part and renamed when complete
(runtime/part_file.h, with a check that kills a writer in the middle), and the allocator's map goes through
plat_file_write_cached. The shader identities and the other cache files already went through an atomic write.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A job that writes into the game folder leaves data/job-running.json while it runs and removes it when it ends. A
launcher closed or killed in the middle leaves it, and the next start logs it and tells the player which job did not
finish and that Rebuild the Game or Begin Installation goes on from the steps that were done.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Add a Mod copied straight into the mods folder, so a copy that stopped halfway left a half mod there, switched on
at the game's next start. It now goes into a folder beside the mods folder and moves in with one rename; a failed or
interrupted copy removes what it made.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The window already locked data/launcher.lock, but a second one closed without a word, the command line did not take
the lock, and nothing kept two jobs apart. The lock is now launcher/locks.py: the window, every command but check and
every job that changes files hold it, the one refused says who holds it, and a job names what it changes so that a
second one on the same thing fails before its first step.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A log without the perf trace said nothing about the free space inside the allocator's device-local blocks, which the
driver counts as in use. Every 3600 frames (600 with the perf trace) a "mem: holes" line now gives the blocks and the
allocations in them, and for the memory type the textures use most the blocks that hold a texture, the textures and
VRAM mirrors in them, the blocks at most half full, and those of them that hold nothing but textures that could be
copied elsewhere or dropped: emptying those is the most a compaction could return.
The counting is runtime/vk_tex_compact.h, which also chooses the blocks to empty, with tests/tex_compact_check.py.
A texture entry keeps the block its memory lies in, so the table is built without asking the allocator per entry.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
tools/make_game.py, the build players run through the launcher, read no profile: only tools/build_game.py did, which
does not build 1.1.1. A kit with data/pgo-v111.profdata (build/pgo/ in a checkout) now compiles the lifted code at -O2
with it and the runtime too, the prebuilt runtime library included. The profile is left out, and every command and
key is what it was, when the kit has none, when its record names another recomp/ than the kit's, when a compiler of
the build refuses the file in one trial compile before the others start, and with NX2NAVI_PGO=off. The record holds
recomp/ by content, which a kit without git can compare. The object keys hold the profile's content and not the kit's
folder, so a launcher update that moves the kit keeps the objects.
--pgo gen (NX2NAVI_PGO=gen from a launcher) builds the instrumented game into the game folder: it counts into
<out>/pgo, records what it was built from for the merge, and stops at once when the build tools lack the profile
runtime. tools/pgo.py merge takes that record, refuses a game built from another recomp/ and finds llvm-profdata in an
MSYS2 folder too. tools/check_content.py refuses profiles in a commit.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The driver's sleep sits where the game's frame starts: at its first pad read or window image acquire after a present,
whichever comes first, before the input is sampled. The frame's number, the count of the game's presents, goes with
its work: the guest thread marks the simulation and the first submission, the replaying thread tags its queue
submissions and marks their end, and the present thread marks the host present, which carries the number too. The
window's swapchain is made with the latency mode while NVIDIA's path is on, and remade when the setting changes.
While the mode is in effect the pacer holds nothing, so a picture goes out as soon as it is drawn and the limit is
kept by the driver before the pad is read; RivaTuner Statistics Server is kept out as with frame generation. The pacer
takes the limit back while a movie plays, while no host present goes out, and for the rest of the run when the frames
show the driver does not hold it. With the mode off every hook returns at its first check.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
runtime/rumble_hd.c turns one of the game's vibration values (a low and a high band, each with a frequency and an
amplitude) into the four bytes a linear actuator's rumble report takes, clamps the frequencies to each band's ends and
the amplitude to the last safe step, and decides when a report is written: the newest value only, a held one again
every 30 ms, the neutral value three times once the game stops. Nothing calls it yet.
tests/rumble_hd_check.py builds it alone, checks known values, the clamps and a batch reduced to its reports, and
decodes a sweep of values with formulae of its own.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A marker or a journal left by a start that died in the boot's builds was always read as a driver crash. Since the
whole warm those builds run for minutes, so a start ended from outside in that time (the task manager, a program that
stops the game, the power) switched the pipeline prebuild off for that driver for good, or put up to 32 variants on
the skip list that the driver had merely been building. Closing the window was already an orderly end and still is.
The crash handler now leaves a note while the boot's builds run. With the note the next start does what it did: it
skips the prebuild, or the variants the journal names. Without it the end is taken for a stopped start: the pipelines
are built again and the journal's variants are blamed on nothing. Three such ends in a row still skip the prebuild,
for a driver that ends the process without a fault the handler sees. The boot's journal has a file of its own, so the
preparation's keeps its meaning.
The whole warm waits prewarm_full_s seconds at most (600): when they are up the game starts, the builders step down
to the background's thread counts and priority, and the file says "done", so the boot screen has one turn per driver.
tests\boot_warm_check.py covers what a leftover marker means with and without the note.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The table still named a new mirror at record time, as the pages' twin: parts already handed to the queue wrote
through the table into the new block before its first copy, the same early access the delayed read was made to stop.
The reads then moved to the mirror some submissions later by a second change that took a second record, cleared its
note before it knew the record was there, and until it ran left the table's readers on guest memory, without what
other shaders had written into the mirror through a buffer binding.
Nothing is changed when the mirror is made now. The prologue that holds the mirror's first copy also holds a store
into the pool's record, after the copy: what was queued before it reads and writes guest memory through the table as
if no mirror existed, what comes after reads the mirror and writes both. No second record, no second change, no
window in which the table is behind. gpa_late = 0 still changes the table at once, as up to 0.9.2.
--probe-vkmem makes a mirror in a recorded submission and reads the table's own memory back: the page names the
mirror with guest memory as the twin, and the mirror holds the pool's bytes. tests\gpa_check.py runs the store as the
GPU would, before and after. A table with no record left now says so once in the log.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw is known by its mesh and program and by its number among the frame's draws with that key, counted in the order of the command stream. It is paired with none when the key is new, was drawn another number of times, has a palette of another size, or has its palette at neither of the two addresses that place last had.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A start that finds the pipeline cache written by another device or driver has nothing built, and everything was
compiled beside the game: an 8-core integrated GPU drew fewer than 600 frames in its first 11 minutes. Such a start
now waits on the "Preparing shaders" screen, with counts, for every recorded pipeline, for the compute pipelines on
every core at normal priority, and, when a sample says the driver's own cache lacks the prepared stage libraries, for
all of them on every core. The memory gate still holds for the builds, and the library builds write the preparation's
journal while the start waits, so a variant the driver's compiler dies on is skipped from the next start on.
boot-warm-owed.txt beside the caches names the GPU and driver: a start closed during the warm is followed by one that
goes on with it, three at most, and "done" keeps later starts ordinary while the cache file still carries the earlier
driver's header. When the boot stops waiting (prewarm_wait_ms, or a minute without progress) the builders step down
to the background's thread counts and idle priority. prewarm_full = 0 turns the warm off.
With nothing in the driver's cache the probe took 425 s on an RTX 5090 with 16 CPU threads: 87 s for 5,775 recorded
pipelines, 19 s for 4,075 compute pipelines and 317 s for 42,231 prepared variants.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every guest thread is a host thread, and the game makes and ends them all through play. A thread that slept through plat_wait_ns kept a waitable timer, one that read or wrote a file an event for each, and one that decoded zstd through the host a decoder context of about 100 KiB; nothing closed or freed them when the thread ended, and a detached thread's own record stayed allocated. They are now given back when the thread's function returns: the handles in win32.c thread_main, the decoder context through plat_thread_end_hook, and the record by whichever of the thread and its detach comes last.
tests/thread_end_check.py runs 416 such threads and compares the process's handle count before and after. tests/sync_wake_check.c gets the two stand-ins kernel.c has needed since the service wait log, so that check builds and passes again. The Linux file only gains the hook call and was not compiled here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A frame that was not rendered when it was due stayed lost: the timer set its
deadline to now once it was more than 100 ms late, and the device-paced path
only filled the ring to its target again, so after every gap the sound was
heard that much later than the picture it belongs to.
Frames that are owed are now rendered and dropped: mixed in full, so the
voices, the effects and the sinks the game reads back advance, and not queued
for the device, whose queue is filled to the same target afterwards. While the
device paces, what is owed is the silence it played for want of frames,
counted in its own samples from an underrun until the prefill is queued again;
the wait for the first prefill and anything owed across a stop do not count.
On the timer a frame is owed when its deadline passed a whole frame ago. A gap
of more than 3 seconds is not caught up: the sound goes on from now.
NX2NAVI_AUDIO_CATCHUP=0 turns it off and keeps the old timing. The audio
statistics line counts the catch-up frames and the gaps that were too long,
and tests/audio_mixer_check.py checks the device's side of the accounting.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The mixer applied each voice's mix volume and each splitter destination's
volume to a whole 5 ms frame as one constant, so the level jumped at the
frame's first sample whenever the game moved a volume, which is heard as a
click. It now keeps what each voice and each splitter destination was mixed
with in the frame before and goes from there to the new value in equal steps
across the frame's samples, as the console's renderer does. An unchanged
volume stays on the constant path.
A voice that has just started, one that was silent in the frame before or was
moved to another mix or splitter, a destination that is new or was moved, and
the first frame after the renderer starts take the new volume at once.
NX2NAVI_AUDIO_RAMP=0 turns the ramps off. The audio statistics line counts the
render passes that ramped a volume. tests/audio_mixer_check.py builds the
mixer with the rest of the runtime stubbed and checks the ramps and the cases
that must not ramp.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With flight = 1 and its thumbnails kept, the recorder now also writes a dump when a frame's picture differs strongly from the frame before and the frame after while those two agree, which is what a one-frame flicker looks like. Each thumbnail is reduced to 16x9 cells of mean brightness where the present thread already sees it complete, and a frame is a flash when at least three cells are more than 24 of 255 brighter or darker than in both neighbours, the neighbours being alike in those cells, around them and over the picture as a whole. A camera cut, a fade, a pan and shapes crossing the picture are no flash, and a frame beside one without a thumbnail is not judged. The dump is the one F8 writes, named "flash" with the frame's number in its header line, at most one every 30 seconds. flight_flash = 0 turns it off; flight_flash_diff and flight_flash_cells set the two thresholds.
On the thumbnails of earlier dumps the defaults flag the frames whose scene was white once and nothing in the runs without that fault. tests/flight_flash_check.py checks the test itself on drawn pictures.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>