A staging buffer, a transient buffer of the replay or a descriptor pool that the driver refuses for memory used to end
the game at once. Now the buffers kept for reuse go back to the driver first: the staging cache, the staging arena's
free chunks, the write-back snapshot pool and the headroom's spare blocks (no new spare block for 30 s after that), and
the allocation is tried once more; only a second refusal ends the game. On integrated GPUs the device-local heap is the
machine's RAM and fills before the commit checks see anything: staging buffers of 11 KiB to 16 MiB refused there ended
the game in Hyrule Field and on the first scene of play (#465, #567).
NX2NAVI_STAGING_FAIL_AT=n (diagnostics) takes the n-th staging buffer as refused once, to test the path.
Check: a Kakariko run with NX2NAVI_STAGING_FAIL_AT=300 logged "staging buffer of 524288 bytes refused (-2): 348.2 MiB of kept buffers and spare
blocks given back, made at the second try" and played on to the end of its script. The transient buffer and descriptor
pool paths call the same give-back and were not forced.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A place's task and mesh programs all arrive in its first frames, and each one's draws are left out until its compute
pipelines are built, so with one thread the foliage of a first visit filled in one program at a time.
NX2NAVI_MESH_FALLBACK_WORKERS (auto: one thread for each 4 logical processors, 1 to 4) sets how many threads make
them, and the log says how long the queue took to empty the first time.
Measured with the fallback forced on, no pipeline cache and new exe names (cold driver cache), the adult save's
first 75 s: with 1 worker the first 5 programs were ready after 420 ms, 3,266 draws were skipped while a pipeline or
program was pending, 1% low 16.1 fps and 145 frames over 50 ms; with 4 workers 256 ms, 956 draws, 55.7 fps and 35.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
AMD's Windows driver answers VK_ERROR_UNKNOWN for some pipelines its compiler gives up on, and the draws that need
such a pipeline were left out for good. create_graphics now tries once more with VK_PIPELINE_CREATE_DISABLE_OPTIMIZATION_BIT
(slower shaders for that pipeline instead of a missing draw) and logs the first such retry. NX2NAVI_VK_NOOPT gains a
value, mesh: only pipelines with task and mesh stages, the foliage's, are built without the optimiser, whose
optimisation is a suspect in device losses some minutes into a forest on AMD GPUs; with it a report can be narrowed
without slowing every pipeline.
Checked: the runtime compiles. A 60 s run with VK_NOOPT=mesh on an RTX GPU logs the mesh-only line, has no error and
the same GPU time as the default (4.09 ms a frame against 4.09), 134.5 fps. The retry cannot be triggered on this
GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A game that stops with nothing in its log leaves no clue to which threads wait for which. A thread of its own now
looks every 2 s for guest threads blocked that long on a lock (ArbitrateLock) or on another thread's end
(WaitSynchronization on a thread handle) and logs each such wait once: the waiter, the lock's holder or the thread
waited for, and whether that one is itself waiting and on what. Waits on condition variables, events and addresses
are left out, since idle worker threads wait on them for good. At most 24 lines a run. NX2NAVI_WAIT_WATCH_S sets the
threshold (10; 0 off). The wait's start is now kept for every blocking wait, not only under the sched trace.
Checked: the runtime compiles and tests/sync_wake_check.py passes. A 90 s run with WAIT_WATCH_S=1 logged one chain
during an area load ("thread 0x102d has waited 3 s for the lock ... held by thread 0x105a, itself waiting 2.6 s"),
and nothing in steady play; with the default of 10 s, earlier runs log nothing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game asks for 1x or 2x on its ground, road and wall textures, so they blur a few metres off at the shallow angles
a third-person camera sees them at. aniso now defaults to 16 (the menu's Texture filtering row and the ini still offer
game, 2, 4, 8 and 16); as before it raises only filtered, mipmapped textures that tile, and shadow maps, data maps and
screen-sized buffers keep the game's setting. A player's saved choice is kept.
Measured: two 60 s runs of an adult save on an RTX GPU at 2560x1440 without DLSS, one with aniso = game and one with
16: the GPU time a frame went from 3.92 to 4.06 ms (+0.14 ms), the frame rate stayed CPU-bound (142.7 and 148.3 fps
mean, within the runs' spread).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina anti-aliases every frame with its own SMAA in three compute passes after the bloom composite. The new aa
setting (nx2navi.ini aa, the Screen tab's Anti-aliasing row) keeps that by default. off, fxaa and smaa leave out the
game's edge and weight passes and replace its composition with a pass of our own that writes the same square-rooted
RGB9E5 words into the scene target: a plain copy, an edge smoothing written here, or the SMAA reference implementation
with its area and search textures (MIT). taa is DLSS or FSR 3.1 at the scene's size, which the row sets through the
upscaler; while either runs, the game's SMAA stays whatever aa says. The game's passes are known by a hash of their
guest code. The shader build now also rebuilds a header when a file its source includes changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's movie player adds the time manager's step to an accumulator at each update and advances the movie by whole
pictures of it, at most the player's limit per update, which is one for the Triforce movie. While a movie plays the
game is held at 60 updates a second, but every late frame cost an update, the pacer started its slots again from the
late one, and the steady step's payback of the lost time came as steps over one frame, which the player cannot turn
into more than one picture. So each late frame put the picture further behind the sound, which plays by the clock, and
it never caught up.
While a movie plays the step is now exactly one movie frame, and the pacer keeps the movie's slots through a lateness
of up to a second, presenting the frames after a late one at once until the game is back on them. The updates then
average the movie's rate, and the picture, the event's update count and the game's clock all stay with the sound.
movie_clock = 0 gives the earlier behaviour. The movie log now measures the picture on screen against real time where
the game releases it (the game fetches pictures ahead into a list of its own) and reports it at the end of each movie.
test_hitch = <every>:<ms> makes a frame that much late every so many presents, for test runs.
Measured on the Triforce movie (event Dm_Kokiri_0095, 7,040 pictures, 117 s), one exe with movie_clock = 0 against 1,
and a 70 ms late frame every two seconds (test_hitch = 120:70), as a run with natural hitches had shown a drift of 40 ms
every ten seconds. Drift of the picture on screen behind real time, from the movie's first 10 s to its end:
fps_limit before (updates/s, drift at the end) after (updates/s, drift over the movie)
unlimited 58.86, 2,187 ms behind 60.22, flat at 53 to 55 ms
144 58.86, 2,196 ms behind 60.04, flat at -11 to -15 ms
120 58.98, 2,257 ms behind 60.20, flat at -1 to 0 ms
60 58.88, 2,220 ms behind 59.98, flat at -21 to -22 ms
Without the late frames both kept time (unlimited: before flat at 21 ms, after flat at -13 ms). The selftest,
--probe-cfg, --probe-kernel, --probe-movie and tests/frame_step_check.py pass; the check now plays a movie started at
240 fps with late and short frames and needs exactly one frame every update.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HDR row lists Off, RenoDX (the game's picture tone mapped to the display, the one fixed look) and Native (the game's own HDR, taken up at the next start), with the peak, game and HUD whites under either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR on is the game's scene through the observer-response mapper, anchored to the game's own mid grey and tone slope, with half of the hue bend of the game's clamp: the defaults the menu had. The tone mapper choice, the mid grey, the tone slope and its match, the hue clip, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare, hue, grade and gamma are gone from the menu, the settings table and the example ini; a file that still sets them works as before, the keys read by nothing and logging nothing. The menu's HDR row is Off and On, with the peak, game and HUD whites under it. The game's own HDR is still there for a file that sets hdr = native, and the row lists it only then. The luminance mapper and its grading code, which no setting reaches any more, are removed from the tonemap library, and the support buffer carries one vec4 for it.
The dark tones of a dark scene sat far above black: the present showed the game's sRGB-encoded picture as that encode decodes, linear near black, while the game is graded for a display of gamma about 2.2, and since the observer-response mapper became the default the 2.2 correction ran with the luminance mapper only. A scene value of 0.003 came out at 0.29 nits at a white of 350 nits, where a 2.2 display shows the game at 0.015. The present now always shows the picture as a 2.2 display would, and the tonemap aims its peak lower by that correction's inverse, so the brightest light still reaches the display's peak; the same value comes out at 0.017 nits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No menu row sets coop_beta; it lives in nx2navi.ini under [coop] (NX2NAVI_COOP_BETA) and takes effect at once. Co-op
itself is unchanged: coop = 1 still runs a session with or without the tab. The notes and the co-op guide say how to
show the tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
That wait ends when the GPU has run the submission's own commands (wb_split = 1). The completion thread was then still
at the last frame's submissions, so the occlusion counts, counter reports and event values the game reads next reached
its memory after it had gone on. A player's capture in Hyrule Field shows the result: trees, ground and walls lose
their direct light for single frames about every 36 frames, 57 of 1,800 frames, and with the fence's wait
(wb_split = 0) the same place showed none.
The fence's wait also covers the rest of what the completion thread does for those submissions, 0.23 to 0.40 ms a
frame of page stamps the game does not read. So those results now have a queue of their own
(vk_completion_add_result), and the waiter runs the ones due for its submission and the ones before it as soon as
the GPU's signal is there; the completion thread runs them the same way, ahead of its other callbacks, one runner at
a time and in the order they were queued. wb_split = 3 is the bare wait as it was, to measure against.
Checked: it builds, the launcher tests and the address table check pass, and the player's hand test of this wait at
that place showed no such frame. Not measured: no scripted run of it was made (the one scripted run with the bare
wait in that field shows 1,170 occlusion counts a frame written late and no dark frame, so the script does not
reproduce the fault), and its cost against the bare wait is not known.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The author of the pull request it was ported from closed that request on 2026-11-11 with the words that they give no
permission to use its code. The history (NX2NAVI_VA_REPORT, runtime/vk_vaddr.c, the stack walk it used and its notes
in the docs and the example settings) goes; the lost device's report keeps the breadcrumbs, the pass marks, the video
memory and the driver's fault information.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Brought onto the line with FSR 4, its frame generation and the debug menu. Where both sides had added to the same
place, both stay: the patch table keeps the pickup count and the free camera, the settings list keeps both sides'
names, the menu includes the co-op page and the debug menu, and the launcher builder takes the pipeline list and the
FSR 4 folder. Both sides had added the menu's typed-character event; one definition stays, with the window code that
passes characters outside the basic plane.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With it on, the game draws from a camera of the menu's instead of its own, in play and in cutscenes. The left stick moves it along its view and sideways, the right stick turns it, ZR and ZL raise and lower it, R makes it faster and L slower, and Link stands meanwhile; or the camera stays where it is and the pad plays the game.
It works inside the game's own camera update: a new patch site sends the instruction at which the frame's position, target and up vector are final to a host function, which replaces them for the camera that follows Link and the one the events direct, so the game draws, culls and loads detail for what the free camera sees. The camera of the interface's 3D models and the one the sound follows stay the game's. The set is off unless the menu switches it on. A teleport's arrival starts the free camera again from the game's view.
Tested in Hyrule Field with scripted stick input (turn, rise, strafe, with Link's position unchanged), with the pad playing while the camera stays, across a teleport to Kakariko Village, during the Kakariko arrival cutscene, and switched on by a click in the menu.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A freeze (a VirtualQuery and a VirtualProtect of 2 MiB) takes microseconds as a rule, but in the second after an area
load each took 8 to 17 ms. The newly loaded regions all go idle together, so 32 came up in one submission: its mirror
begin took 70.5 ms and the frame 78 ms, and a 9 ms freeze followed in each of the next 20 frames. In a play session
363 regions were frozen in the second after Kakariko loaded and 70 to 120 a second for the next 20 seconds, with the
frames over 50 ms in the same windows. A pass now stops once it has spent NX2NAVI_FREEZE_BUDGET_US (default 1000;
0 as before), and a freeze over 2 ms holds the passes for 250 ms, doubled for each slow one in a row up to 2 s. On the
Kakariko route the time in slow memory calls after the load went from 1374 ms in 170 calls to 115 ms in 18, the 78 ms
frame is gone, and the regions freeze some three seconds later, once the calls are fast again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The finalize of a used pool flushed and waited for every upload batch and then for the idle queue. During an area load
the queue also holds the load's texture uploads, which name no pool's storage: entering Kokiri Forest, one finalize
waited 418 ms and the frame took 462 ms. The game finalizes a pool once its own work with it is done, so the finalize
now waits for the submissions issued so far and returns; the pool's buffer and memory go once the upload batches handed
out by then and the submission being recorded are through. NX2NAVI_POOL_FINI_IDLE=1 keeps the old wait.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With debug_menu = 1 (off by default; the Game tab has the switch) F9 opens a panel on the left edge in the
performance overlay's look, with the game in view beside it. ui/menu.cpp lays it out in the settings menu's place,
so its input and the game's blocked pad are the menu's own. Typed characters now reach the menu for its text fields.
Flags: the game's 11,292 on/off flags are read from its game data manager, and a click changes one through the
game's own function on the game's thread at its pad read (runtime/debug_tools.c dbg_tick), so the game applies it
at its next update as it does its own changes. The game knows a flag by the hash of its name only; the names shown
are found in the player's own event flow files, hashed and matched when the panel first opens (2,250 of them from
915 files in 0.2 s), and none is kept in the code. World: Link's position, and a speed factor from 0.05 to 8 that
multiplies the step the runtime gives the game each frame (measured 0.50 at 0.5x). Memory: a search of the heap
for a value of 1, 2 or 4 bytes or a float (about 2 s), narrowed by equals, changed, unchanged, went up or went
down, with a value to set at a place or to hold there every frame.
Tested through the window's own messages: F9 opened it, a click on a flag set that flag in the game, text typed
into the filter narrowed the list, and F9 closed it; a scripted run set and held a value and put it back.
Teleporting, a free camera and starting cutscenes are not in it: writing Link's position, or every copy of it in
the heap, moved him back within three frames, so they need the game's own warp, scene-change and event functions.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game draws its scene into one of a few pooled targets of the same size and moves to another whenever its pass list changes, while the camera and the scene carry on. vk_dlaa.c target_changed started a new history at every such change, so DLSS and FSR 3.1 began again from one jittered frame each time: a few soft, grainy frames with dots over the whole picture. The history is the upscaler's own and not in the target, so it now stays where the frame has valid motion vectors (the camera of this frame and of the last one); without them a new history starts as before. The log line of a change says which of the two happened, and the 300-frame line counts the changes with the history kept. NX2NAVI_DLAA_TARGET_KEEP=0 gives a new history at every change.
From pull request #538, whose author counted 35 resets in a walk of a minute through Kokiri Forest before and 1 after. Here it is compiled and the settings probe passes; it was not run in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A pipeline cache over the size limit was dropped at every start and, since the file is no longer written in play, never replaced: every start began empty. The play file is now folded in at the next start whatever its size when the file beside it is over the limit.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
auto turns the fallback on for a device without VK_EXT_mesh_shader, 1 for every device (testing), 0 never.
mesh_fallback_mb sizes the buffers the passes write. Nothing draws through it yet.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Two descriptors can name one CPU-written storage: one whose content the cache takes from the CPU, and a second with a texture flag for which it does not. The second has no upload of its own and its slot shows the first one's image while that entry is live. Once the first is released, a lookup of the second's slot makes it an entry of its own, start_at destroys the released first one, and the new image starts cleared and is never uploaded; the slot shows it from then on, also after the first descriptor is registered again. The same happens when both are released and the texture pool refresh looks the second's slot up before the next texture arrives in that memory.
With tex_split_fill = 1 (the default) start_at gives such an entry the storage's bytes: by a copy from the released CPU-written entry it is about to destroy when that image is current and alias_compatible allows, else by an upload from the storage. The image then follows the storage as a CPU-written texture's does until the GPU or WriteTexels writes it; 2 fills it once, 0 is the behaviour before. Depth, stencil and multisample images, pools without CPU access and storage over 32 MiB are left out, and an entry that is to be filled gets a new image instead of a released entry's, since a reused image goes through its first transition after the upload batch. The perf trace counts the copies, the fills with their bytes and time, the fills made again after a write and the entries left empty.
--probe-vkmem makes both sequences with the three values and reads the second descriptor's image back: zeros with 0, the storage's bytes with 1, and with 2 the bytes of the texture that was in the memory before when both descriptors were let go of. One case makes the entry inside a recorded submission, through a hook that lets the probe stand in for a replay, and there the content comes by the copy.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The library creates its pipelines itself and names no pipeline cache. It is now handed pipeline creates of the runtime's in the place of the device's two, and a create without a cache is asked of the pipeline cache first and compiled into the play cache otherwise. ffx_pipe_cache = 0 turns it off. --probe-ffx-cache makes one upscaling context without a window or the game and says where its pipelines came from, and tests/ffx_cache_check.py runs it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The fence's wait cost about 4.5 % of the frames a second, and the player who reported the flicker still sees it and black frames with it. wb_split = 0 keeps the fence's wait for whoever wants to compare.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
pipeline-cache.bin was copied out of the driver and written whole at every save after any pipeline was created, also one the cache had held: tonight's logs show three saves of 358.1 MB in a run that added 0.3 MB, and 302 to 306 MB written in each of seven sessions that added about 0.5 MB each. The library warm in play built its 37,572 stage libraries into the same cache, which grew it by 1.6 GB: a save of 2026.7 MB in play, a file over pipeline_cache_max_mb, and the next start dropped it whole and compiled the pipelines it had held.
cache_save now asks a cache for the size of its data first and neither copies nor writes one whose size is what its file holds. What a run compiles goes into a second cache with its own file, pipeline-cache-play.bin (pipeline_cache_play, default 1; needs pipelineCreationCacheControl): pipe_create_in asks the first cache with VK_PIPELINE_CREATE_FAIL_ON_PIPELINE_COMPILE_REQUIRED_BIT and builds into the play cache only when that says a compile is needed, and in play only the play file is saved. At a start the play file is read back and merged into the first cache in memory; once it reached pipeline_cache_play_mb (64) it is folded in for good: pipeline-cache.bin is written once, before play, and the play file removed. The preparation modes fold it at any size and build into the one file as before. The library warm's threads create with no cache of ours, so their libraries reach the driver's own cache alone.
Checked with --probe-prewarm on a copy of a dev folder's caches (3,212 recorded pipelines, 333 compute shaders), no game run: with a filled pipeline-cache.bin every pipeline came from it and neither file was written; with none and a cold driver cache the compiles went into pipeline-cache-play.bin (75.9 MB written, pipeline-cache.bin not created); the next start merged it and wrote pipeline-cache.bin once (191.1 MB) and removed it; kept below the fold size, a play file of 68.8 MB gave 1,445 pipelines at 0.3 ms from the first cache where 470 hit without the merge, and was not written again. Not checked in play: the saves during a session, the library warm without a cache, and drivers other than NVIDIA's.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
runtime/vk_fg4.cpp makes the frame generation swapchain and context with the libraries FSR 4 comes with
(amd_fidelityfx_loader_vk.dll and amd_fidelityfx_framegeneration_vk.dll beside the executable). vk_fg.cpp takes
that path only with fsr4_fg = 1 while FSR 4 is the upscaler; the default stays the FSR 3.1 library. The loader
picks the version for the card: the machine-learned FSR Frame Generation 4 on Radeon RX 9000 cards with Windows 11,
which is untested, and 3.1.6 elsewhere. On an RX 7900 XT (driver 26.10.1) it lists frame generation 3.1.6 and the
swapchains 4.0.0, which the driver brings and the loader chooses, and 3.1.7. The swapchain in place is wanted only
while its library is the one to use, so a change of the setting or of the upscaler, or a failure of this path,
takes it down as switching frame generation off does and the next present makes it with the other library.
The preparation gives this library the camera's position and axes, which FSR Frame Generation 4 requires, and a
scene scale of one metre a unit: with the 0.01 the FSR 3.1 path uses, version 3.1.6 drew grey translucent shapes
into the sky of its frames while the camera turned (160 captures of the screen during a camera sweep; clean with 1).
Both paths now generate a frame only when the picture without the HUD is there for it: generated from the
presented picture alone, the HUD would be warped with the scene behind it. In four configurations (21:9 with either
library, a 16:9 picture in a 21:9 window, a 1080 picture without HDR) every generated frame had it, and the log
counts the frames without. On screen, of the 6,404 pixels of the HUD's item button that stayed fixed through a
camera sweep with the FSR 3.1 library, 6,162 stayed fixed with this one.
Standing in Hyrule Field at 3440x1440 with FSR 4 Quality the game draws 43.0 frames a second with this path and
42.2 with the FSR 3.1 library, each shown twice over. One run changed the present mode, HDR, fullscreen, frame
generation, FSR 4, this setting and the upscaler in turn: 216 screenshots without a bad frame, and no failure.
The SDK's frame generation headers join runtime/third_party/ffx_sdk, unmodified. tools/make_kit.py and
tools/make_launcher.py take the third library from the --ffx4 folder when it is there, and tools/make_game.py
copies it beside the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
For a day that wait ended on a second timeline, when the GPU had run the submission's own commands (wb_split = 1,
then the default), on the thought that it only left out write-backs nothing needed yet. It left out the completion
thread's side effects for the submissions before it as well, and the game reads some of those next: the occlusion
counts, counter reports and event values, and the stamps the texture checks read. A frame's first submission is small
and runs right behind the last frame's large one, so the game went on while that one's callbacks were still running.
Measured in Hyrule Field with the camera turning (RTX 5090, lazy write-back on): 2,267 of 2,320 such waits returned
before those side effects had run; they were through 0.45 to 0.8 ms later on average, 12.6 ms at most, and in that
time 770 to 1,015 occlusion counts, 21 to 28 counter reports and 17 event values a frame reached guest memory. The
submission the game waits for wrote nothing back in any of 14 runs, so its own write-backs were never the matter.
A player saw a patch of grass near the camera change from frame to frame there and less of it with the fence's wait.
No scripted run showed such a frame with either wait, so the link to what the player saw is not shown.
The fence's wait takes 0.65 to 0.7 ms more of a frame there, about 6 % at 85 frames a second (single runs beside
other work). wb_split = 1 still gives the other wait, and 2 forces it with shadow storage.
NX2NAVI_TRACE=perf now counts what a wait on that timeline leaves behind and the completion thread's time by callback.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 4d108b706e72c001ddbe20608f06469885df584b)
The game held 23.9 to 24.4 GB of commit in three sessions on an RTX 5090 at 3840x2160, flat over the session, on a
machine whose commit stood at 66 of 73 GB with it. A machine that cannot give it that much pages, drops textures or
loses the device, and its log said nothing about memory until then.
mem_start_note reads the system's commit when a game starts and writes one warning line when what is free, plus what
the process already holds, is below mem_need_mb (24576 by default, 0 for no warning). The menu has no place for a
start-up notice (its only toasts are the co-op page's), so the line is in the log alone.
tests/mem_need_check.py checks the rule and, through --probe-memneed, the answer and the warning line with the
machine's own commit.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Only the large compute shaders' background builder looked at the system's commit before it started a build, and it
saw nothing of what the builds beside it were about to take. The boot's recorded pipelines (up to 64 builders), the
pool's background builds during play, the boot's compute pipelines and stage libraries and the library warm asked
nobody.
Each of them now asks the gate before a build. A build that starts reserves an estimate of the driver compiler's
working memory until it ends (build_reserve_mb, 64 MB; 4096 MB for a large compute shader), and the gate admits a
build only while the commit headroom holds the part kept free (build_free_mb, 4096 MB), the reservations and its own.
A refused boot builder ends and leaves its pipelines to the pool; the pool leaves a background build queued and asks
again every two seconds; the stage library prebuild and the library warm wait up to 30 seconds and then end, and the
warm goes on at the next start. A pipeline a draw or a dispatch waits for is never refused. The preparation of the
pipeline list runs without the gate: no game runs beside it.
tests/build_gate_check.py checks the gate's arithmetic and, through --probe-buildgate, its answers with the machine's
own commit. What the builders do when refused is not exercised by a test.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A lost device used to end the process from whichever submit or wait noticed it first, while the present only logged it
and went on and the other threads kept calling the driver. The completion thread could take the submissions' timeline
as reached and run the callbacks of submissions that never finished.
vk_device_lost_check now takes the result of every submit, present, acquire and wait. The first thread to see the loss
sets a flag, writes the report and ends the process as a fatal error does (the log written, a save commit under way
finished), with an exit code of its own; later threads stop in that call, and a watchdog ends the process after ten
seconds should the first thread hang. The replay, its submit, the uploads, the present and the lazy fetch read the flag
and return without touching the device. The completion thread asks the device with a call of its own before a new
value counts and runs no callback once the flag is set.
The executable's --probe-devlost and tests/device_lost_check.py check this without a lost device, and
device_lost_at in nx2navi.ini ends a real run the same way.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With the retiring on, a player's session lost the ground of Hyrule Field and Lon Lon Ranch (6,663 retired, 928 back), and with the two holes of the way back closed it lost it again on arriving in a village (1,441 retired, 82 back; neither fix acted once). With the retiring off the same play kept its ground. What keeps the stand-in in place is not found; a draw that samples it once into a picture the game keeps would, and no mark undoes that. tex_disuse_evict = 1 turns the retiring back on; the shaders keep their marks, so no pipeline changes either way. Released textures and idle ones the game no longer names still give way when memory runs short, so a PC that is short of memory has less to give back than before.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
runtime/vk_ffx4.cpp loads amd_fidelityfx_loader_vk.dll from beside the executable and asks it which upscaler
versions the device can run. Where a 4.x version is listed (Radeon RX 6000, RX 7000 and RX 9000 cards with AMD's
driver 26.10.1 or newer) the menu's Upscaling row gains AMD FSR 4 Native AA, Quality, Balanced, Performance and
Ultra Performance, and fsr4 = 1 runs it in FSR 3.1's place with the same inputs. Its contexts are made with that
version asked for by its id and the provider is asked afterwards which version it runs, so no other upscaler can
be shown under the name. When a context or a dispatch fails, FSR 3.1 makes the frame, and after three failures
FSR 4 is off for the run. Each upscaler starts its history anew on the frame after a change from one to the other.
The setting is off by default and the Linux build compiles stubs.
On an RX 7900 XT (driver 26.10.1, 3440x1440, HDR) the library runs FSR 4.1.2: a context takes 54 ms to make and
217 MiB of video memory. Standing in Hyrule Field: Quality 47.8 fps where FSR 3.1 gives 51.5, Native AA 41.4.
Screenshots of 601 consecutive frames standing, 801 during a camera sweep, 701 each in Kakariko and the
graveyard, and 1,301 across changes between FSR 3.1 and FSR 4, their modes and off show no flicker that FSR 3.1
does not have, and it runs together with FSR 3.1 frame generation.
The SDK's API headers are in runtime/third_party/ffx_sdk, unmodified, with the licence. tools/make_kit.py and
tools/make_launcher.py take AMD's two signed libraries with --ffx4, and tools/make_game.py copies them beside the
game when the kit has both.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
mouse_mode = direct is the default, but on 1.1.1 it did nothing: only the 1.4.3 patch table had the sites, so the mouse always went through the stick emulation, which gives no turn at slow mouse speeds and tops out at about 107 degrees a second. The 1.1.1 table now has the set mouse_direct (on by default): at main+0x37c45c, where the camera's input update holds the processed stick in s1 and s0, a host call performs the displaced store and adds the raw mouse counts to both, so the mouse meets no dead zone and no curve; at main+0x37c4f0 a second call clears the idle bit for an update the mouse moved in. The counts are divided by the frames the game steps per update and by the stick camera speed, so the same hand movement turns the same angle at every frame rate. The Controls tab gets the mouse mode and mouse sensitivity rows, and mouse_mode = stick or NX2NAVI_MOUSE_DIRECT_PATCH=0 gives the old behaviour.
Checked here: the generator lifts the 1.1.1 game with the two sites (it compares each site's original word), the lifted game compiles and links with the runtime, and tests/mouse_direct_check.py passes its 1.1.1 harness (register contract, displaced store and load, equal turn at every frame rate and stick speed, the reset pause, capture and mode). Not checked here: the game was not run, so aiming with the mouse was not tried, and the differential tests against Unicorn were not run because no Python on this PC has Unicorn. The contributor measured 0.0800 degrees per count on both axes in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit bb8fecfbe43517006eafd7be9c22e8dbe9601de7)
Without the other players drawn in the world, which are unfinished. No relay address is built in, and with co-op off nothing opens a socket. Built on Windows and tested against a relay on this PC only; two games in one room and any real network have not been tried.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A second reading of the commits taken in from pull requests found these, each traced in the code:
- heap_lazy: the camera speed's search read the whole heap, which with the setting on committed every page and undid what it saves; a scan now steps over the pages the lazy heap never committed (mem_untouched_run). tests/frame_step_check.py and tests/save_share_check.py no longer linked (frame_rate.c and fs_host.c call the new memory functions; the second also missed mem_probing before); both pass again. The settings text says that with the setting on a PC out of commit ends the game in play, not at start, and the census comment is back over its own function.
- Pipeline libraries on AMD's older Windows driver: the condition is the driver for RDNA 2 and older (RX 400 to RX 6000), not RX 5000 and RX 6000 only, and the texts named a price the code does not have. With libraries off a new pipeline is built by a worker while its draw is left out, and the start waits for every recorded pipeline instead of 20 s at most. The texts say so, and that the finding is one player's on one card. The menu strings nothing shows are as they were.
- Page file hint: it comes only when Windows sizes every page file, and it names the initial size and the automatic management that must be unticked first.
- Frame generation note: it keeps "needs an RTX 40 or newer" for the players it is right for and points the others to the log; the bridge's line says it is Streamline's general support check.
- Comments and settings texts that still described the old behaviour: the process commit bound, the wait with shadow storage, the scratch's least size, the action prompt under auto.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 19f03aa01b26d6e17fb5fc70ad987aa8c68e8225)
Verified by runs in the audit: the Market's periodic stall (a pool slot was listed once per refresh pass instead of once; the list fell from 160,385 entries to at most 3,192 and no frame over 20 ms remained while standing), orderly exits delete the pipeline prebuild's running marker (left behind, the next start wrote a skip file and every later start skipped the prebuild), the log and crash report name an area a save asks for that the game does not have, and the menu atlas hash no longer overflows a signed multiply. The other fixes compile and pass the regression route but their faults were never reproduced: see AUDIT.md section 13 for each.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
This line logs every setting nx2navi.ini sets, and a bug report takes a copy of nx2navi.ini along: with co-op both would have carried a room's secret, the relay's address and the player's name to whoever reads the report, and the secret lets anyone into the room. One list (runtime/cfg_private.h: the room's secret, the offer number, the relay, the name, the key a maker removes, the menu's test hook) now serves the log's line, "Copy system info" and the report's copy of the file, in the game and in the launcher: such a key reads "(set, not shown)", every other byte of the file stays.
Also: the last leftovers of the restorations that were left out with the puppets (their settings prefix and section), main.c's byte order mark as it was, and two comments that cited files this tree does not have.
Checked: with a room, a relay and a name in nx2navi.ini the log's line shows all three as set and none of their values; the same text gives the same bytes through the game's scrub and the launcher's (a launcher test, and the C function built alone); the launcher tests, the co-op probe, the relay tests and the tab check pass.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Each player keeps their own game and save. One player makes a room, the others join it with its secret, and story flags and, by the room's rules, items, songs, quest items, small keys (a shared pool), rupees and ammunition reach every save. The layer is a host thread with one UDP socket to a relay the players run themselves (tools/coop_relay.py, Python's standard library only); the messages between the players are sealed with a key from the room's secret (XChaCha20-Poly1305, Monocypher 4.0.2 vendored with its licence and a row in THIRD_PARTY_NOTICES.md), every change is signed by the player who made it, a player accepts a room by its members' keys and the key of its rules, the save is copied to coop-backup before anything is applied, and values are set through the game's own routines between frames. The Co-op tab makes, joins, accepts, removes and leaves, and the menu takes typed text for the name, the relay and the secret. This is the contributor's pull request #518 on this line.
Nothing reaches the network while co-op is off: the socket is opened, and the relay's name looked up, only after co-op is on, a relay is set and a room is made or joined. There is no default relay.
Left out of the pull request: the other players drawn in the world (the "puppets") with the copied engine they need. They were unfinished, added two patch sites to the game's per-frame update that could not be put through the differential tests here, and their file helpers clashed with the ones this line already has. So no position is sent: the POS message's codec stays, nothing sends it.
Changed against the pull request:
- The menu's test hook drives the Co-op tab only when it comes from the environment. From nx2navi.ini it could turn co-op on, join a room and accept its offer.
- The log's label for a room is hashed from the secret instead of being its first three characters.
- A game that has not saved yet has no save to copy, and takes nothing from the room until it has saved once; that used to count as a copy made.
- A PING's token no longer carries the PC's uptime.
- On Windows the maker's key file and its folder get an access list with the player's account alone.
- The tests that link the platform layer get the socket library, and the save test a stand-in for the title screen's hook.
Checked on Windows, where the pull request had never been compiled: the runtime builds and links; --probe-coop passes (sockets on 127.0.0.1, the codec against its byte vectors, a fuzz of every parser, two sessions through a hostile mock relay, a relay restart, the sync engine); tests/coop_relay_test.py passes its 61 tests, with the probe through the real relay on 127.0.0.1 at 0 and 30 % loss; tests/coop_page_check.py passes and its deliberate fault fails 48 checks. Not checked: two games in one room (one game runs at a time here), any real network, the tab in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Loading a save in Hyrule Field at night lost the device about 2 s after the load in 7 of about 22 loads on an RTX 5090 (a GPU read fault at the start of a large buffer, in or right after one of the game's compute dispatches). With the lazy write-back off it loaded 10 times of 10, and with only the piece release off 15 times of 15. How the piece release leads to the fault is not known; until it is, a CPU touch releases its whole range again, as before the town performance pass. wb_lazy_chunk = 1 turns it back on.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The two sides both made the wait after a frame's first submission cover the write-backs under shadow storage; the rule is kept in one place, vk_sync_wb_split.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
NX2NAVI_SHADOW_CHECK=1 logs with the shadow line, every 60 frames: the whole copy-ins that overwrote a store a
shader made through the device address table, and the pools they fell on; the write-backs that moved bytes into
a page the CPU had written since its copy-in; the bytes both sides changed since their base copy; what the
copy-ins cost by kind, and which pools and flag sets took them. The stores are found by content: a whole
copy-in leaves a hash of the page, and the next one compares the shadow page with it first.
NX2NAVI_SHADOW_TABLE_STORES=1 keeps such stores: a page found stored into gets a base copy, so copy-ins take
only the CPU's bytes, and the fence of every submission that uses the table writes the stores back to guest
memory. --probe-vkmem checks it with a GPU write that nothing notes. It is off by default. The overwrite it
removes was the suspected cause of the flicker on Linux and is not: standing outdoors (RTX 5090 with
NX2NAVI_SHADOW=1) it happens exactly four times a frame, on ten pages in pools of 20 and 44 KiB, with the copy
that precedes the frame's stores, and no frame came out wrong with it or without it in 1,800 frames each; the
hashes cost 1.8 ms a frame of the replay (67 against 75 fps); and a count the CPU resets before the write-back
has landed would keep counting, where the whole copy-in resets it every time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage (the Linux default) what the GPU wrote reaches guest memory in the fence's completion
callback, later than an import's store on the GPU. The wait after a frame's first submission returned at the
executed timeline, before that, so the game rewrote what those passes had written and the write-back then put
the GPU's older bytes back over the rewrite. The whole 3D scene came out brighter for single frames, each of
them a frame whose main work was held at its CPU event wait and replayed late.
Standing outdoors with NX2NAVI_SHADOW=1 on an RTX 5090: 695, 624, 443, 323 and 2 flashed frames of 1,800 in
five runs with the split, none in eight runs without it. The frame rate did not drop (74.6 fps median with the
fix; runs of the build before it gave 71 to 72). NX2NAVI_WB_SPLIT=2 keeps the split with shadow storage, to
measure the fault. That this is the flicker a player reported on Linux (RX 7800 XT, RADV) is not confirmed on
their machine; NX2NAVI_WB_SPLIT=0 gives 0.7.1 the same wait there.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The HDR tonemap gains a mapper built on a finite cone response in LMS: scene grey 0.18 lands where the game's curve puts it and rises through it with the slope of the game's curve, and the hue bend of the game's clamp is given back to bright colours. It takes the scene before the game's exposure gain and the gain itself, which the splice now finds in the game's shader. The luminance mapper stays selectable and the game's own curve stays the third choice. The mapper fits the Rec. 709 gamut here, as the game's scene target holds no negative component. New settings: the tone mapper's mid grey, tone slope match, tone slope and hue clip emulation. The gamma correction on the present applies with the luminance mapper only.
Not part of this: eye adaptation, the anti-aliasing and reconstruction shaders, bloom and local exposure sliders, the output colour space choice and a 16-bit float scene target. Checked by build and numerically against the source of the port; the picture on an HDR display has not been judged. THIRD_PARTY_NOTICES.md names the source.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Windows charges every committed page to the commit limit whether it is used or not, and the game sizes its whole heap up front: in Castle Town after Hyrule Field the heap held 6.8 GiB of commit of which 3.4 GiB had ever been used. With heap_lazy = 1 a change of the heap's size only moves its end, an access to a reserved heap page commits the reserved runs of the 64 KiB around it in the access-fault hook and runs again, and the paths that do not fault commit their range first: mem_thaw (file reads, the host-pointer import), mem_kernel_access (file writes, the frame-rate fix's read) and mem_host_readable (the host's pointer checks). A page another path committed is left as it is, so a frozen, probed or armed page keeps its protection. With trace = perf a line per window gives the faults, the bytes committed and the time they took.
The contributor's runs on a 16 GB PC: 4.67 instead of 6.77 GiB of heap committed and 29.3 instead of 32.9 GiB of process commit in Castle Town, no "system commit low", 12,858 faults in 440 ms over four minutes, the longest 41 ms. With the setting off nothing is hooked and the heap is committed as before.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A new depth or stencil image was cleared in the upload batch, which runs before the whole part being recorded. Bound into pool memory, the image shares its bytes with the live texture at its address, so the clear could wipe depth that earlier draws of the same part still read: the sun's shadowing went fully dark for one frame a few times a minute where the game resizes its shadow maps. The clear now goes in at the replay's position, as it already did for reused images (depth_init_inline, default 1; 0 is the old order). The switch that copied the live image's depth into the new one is removed: every such image was cleared by the game before anything read it, and the copies cost smoothness.
From a contributor's diff and measurements at a town gate: 0 dark frames in 5,423 with the change, 12 in 2,728 without. Checked here on the combined build in Hyrule Field before the Market's gate: every new depth image is started at the replay's position, none in the upload batch, and none had to end an open pass. The dark frames themselves were not counted here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>