The texture pool refresh looks up every registered slot, so the textures of every area the game keeps loaded never
counted as idle and their memory only grew. Marked shaders now store into a buffer with one word per pool slot. Every
four submissions that recorded work, the replay copies it out and clears it, and the texture side notes when each
texture was last sampled. Under VRAM pressure or low commit, once idle textures are gone, live textures that come back
intact and were not sampled for 1800 presents go too. Their keys are held, so the pool refresh keeps the stand-in until
a shader samples that slot again, and the next refresh makes the texture again.
Fragment shaders that neither discard nor write depth, sample mask, stencil reference or memory keep early depth tests
(EarlyFragmentTests), so the marks do not take away early depth rejection. Alpha to coverage leaves the dynamic state
while marks are on, so each pipeline knows whether early tests are safe. Disuse eviction waits until every module that
indexes the pool was marked and two reads arrived. NX2NAVI_TEX_DISUSE=0 (tex_disuse = 0) turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 1a4c896150a748f9275c3024e96af3055db94af4)
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.
Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The event order (vk_exec.c) holds a submission at a wait whose signal has not been replayed. In Kokiri Forest dialogue several presents a second came with the frame's whole submission held (4 held submissions, nothing drawn since the last present): the present showed the picture from before, a flash of the whole picture, and the frame was drawn afterwards in the present thread's empty submission, next to the following frame. With the event order off (NX2NAVI_EVENT_ORDER=0) the same spot had no such frame in 3600.
present_held (vk_backend.c, synchronous replay only): at a present with held work, what can go on runs first in a submission of its own; if work is still held, the present waits and goes out after the submission that replays the last of it, at the next present, or after 8 submissions. present_held = 0 (NX2NAVI_PRESENT_HELD=0) turns it off.
held_sync (vk_exec.c vk_exec_record): a submission without commands of its own that resumes held work now gets the VRAM mirror sync before and the write-back after, and a uniform copy, like any submission. Before, that work read mirrors that had missed the CPU's latest writes, and its GPU writes were dropped from the write-back list by the next submission's vk_mem_mirror_begin. held_sync = 0 (NX2NAVI_HELD_SYNC=0) turns it off.
Not yet measured in play.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
In Kokiri Forest dialogue (Saria, dlss = performance) about 1 frame in 20 had no camera, and DLSS started a new history twice for each: 24 to 26 camera resets per 300 frames. The camera block was looked up in the uniform copy of the submission DLSS ran in, which on those frames had none: the frame's work had been held past its present by the event order and ran in the present thread's empty submission. vk_dlaa_draw now keeps the camera rows as the first scene draw read them (vk_usnap_read), and mv_pass uses those. A frame with no scene-context draw at all keeps DLSS's history with zero motion, for up to 6 frames in a row.
Measured at the Saria spot: camera resets went from 24 to 26 per 300 frames to none in 3600 frames (the first frame only). The whole-picture flashes stayed: they come from the presents that go out with that work held, handled separately.
The log now explains frames without a camera, frames without the DLAA point (with the held submissions at that present), light target changes and a second scene after DLSS ran, plus a line every 300 DLSS frames with resets. dlaa_cam_keep = 0 (NX2NAVI_DLAA_CAM_KEEP=0) restores the old camera handling.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina runs compute work on a second queue that trades results with the main one through events: the worker's command buffers wait (WaitEvent) for signals the main queue gives in its submission a few submits later, and the main queue waits for the worker's signals in turn. Replayed one submission after the other, the worker's steps ran before the work they wait for and read the previous frame's results, and the characters came out much too dark at any time of day (Kokiri Forest: about 13 waits a frame, 7 of them reached before their signal).
A top-level wait whose condition does not hold in replay order now stops its submission: the rest is held, with private copies of its recordings and the queue's state, and the queue's later submissions line up behind it. After each replayed signal the held work whose wait now holds goes on inside the command buffer being recorded, between full barriers, with its own state swapped in. Work still held after 36 submissions goes on regardless, as before (counted in the NX2NAVI_TRACE=perf line). The queue reaches the back end as gfx_submit_queue. Only with the replay on the submitting thread; NX2NAVI_EVENT_ORDER=0 turns it off.
Tested by play in adult Hyrule Field with the tree fix of the previous commit: Link lit normally at dusk and at noon, trees steady, lighting otherwise unchanged. The white specks in the grass remain (they predate both changes).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Small ranges the game invalidates and reads back (the exposure meter) are copied from guest memory into the mirror at every submission that uses their pool, so a CPU write made between recording and the GPU's run is not lost; NX2NAVI_READBACK_SYNC=0 turns it off.
While the boot builds the recorded pipelines a marker file exists next to the pipeline cache. A start that finds it left over records the GPU and driver in pipeline-prewarm-skip.txt, and starts on them build those pipelines at their first draw instead.
CommandBufferWaitEvent is now recorded as OP_WAIT_EVENT. The replay waits for nothing but counts the waits it reaches before their signal, and how many submissions later that signal comes, in the NX2NAVI_TRACE=gfx frame line.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Opt the process out of Windows power throttling (execution speed and
timer resolution) at startup; NX2NAVI_POWER_FULL=0 turns it off.
- Fence completion thread wakes waiters before collecting freed memory,
so collection no longer delays them.
- Add a by-region barrier when a draw or clear writes an attachment that
an earlier draw in the same pass sampled; count it and inline uniform
updates in the per-frame stats.
- Hash small texture contents at upload and skip re-uploads whose bytes
are unchanged (removes ~420 redundant uploads per frame in Kokiri
Forest); NX2NAVI_TEX_SAME=0 turns it off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each file that contains copied code names its copyright holder and license and points at THIRD_PARTY_NOTICES.md; zlib code keeps its full notice and the mark that it was altered. Comments and probe text only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The texture pool descriptors are now a ring of sets, one per submission, brought up to date from a change log, and the first submission of each frame waits for its GPU work before the game goes on: the GPU ran late and part of a frame read data of the next one, and distant characters drew NaN that bloom spread over the frame. The window acquire also waits for the image's previous frame. Function locals start at zero unless DLAA is on, which removes the per-warp light tiles on the Great Fairy Fountain floor and Link's dark, speckled look. Texture slots follow only live entries of their own target, so the volumetric fog gets its 3D volume. The pool refresh walks only the slots that changed.
The translator implements PRMT (patch 0021), which it only logged before; the button prompts render again. HFMA2.RELU no longer depends on it, HMMA.F16 rounds once and HMMA.F32 is lowered, checked against GPU vectors with a new Maxwell warp emulator.
The frame dump gains a re-arming white-frame trigger, a trigger on a depth target's first pass, NaN pixels in magenta, image handles and view targets, and depth copies of sampled depth textures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The NVN2 front end and the SM86 to Maxwell shader lowering (tools/xlate/AmpereLowering.cs, mesh and task stages,
bindless texture pools, BRX jump tables, the NVN2 compute c0 layout) with four translator patches (0017-0020) bring the
opening of the game to 58-60 fps on the Vulkan renderer.
This round fixes the haze: SM86 IPA is lowered as a plain Maxwell IPA.PASS (texture coordinates were corrected for
perspective twice); LDSM, TXD, both F2IP byte forms, HMMA, MOVM and HFMA2.RELU are lowered and spill mode has eight
uniform register groups; conditional rendering keeps the newest counter report per address and treats a report as
pending until its value is in guest memory, so occlusion tests and the depth clears around the depth copy behave; and
the upscaler stand-in decodes the post pass's sRGB picture before writing the linear target. Tensor-core programs keep
the stand-in unless NX2NAVI_NATIVE_TENSOR=1, because their lowering does not match the hardware yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>