Commit Graph

138 Commits

Author SHA1 Message Date
chrg6
719ee94e67 Write a pipeline cache only when its data grew, and give what a run compiles a cache file of its own.
pipeline-cache.bin was copied out of the driver and written whole at every save after any pipeline was created, also one the cache had held: tonight's logs show three saves of 358.1 MB in a run that added 0.3 MB, and 302 to 306 MB written in each of seven sessions that added about 0.5 MB each. The library warm in play built its 37,572 stage libraries into the same cache, which grew it by 1.6 GB: a save of 2026.7 MB in play, a file over pipeline_cache_max_mb, and the next start dropped it whole and compiled the pipelines it had held.

cache_save now asks a cache for the size of its data first and neither copies nor writes one whose size is what its file holds. What a run compiles goes into a second cache with its own file, pipeline-cache-play.bin (pipeline_cache_play, default 1; needs pipelineCreationCacheControl): pipe_create_in asks the first cache with VK_PIPELINE_CREATE_FAIL_ON_PIPELINE_COMPILE_REQUIRED_BIT and builds into the play cache only when that says a compile is needed, and in play only the play file is saved. At a start the play file is read back and merged into the first cache in memory; once it reached pipeline_cache_play_mb (64) it is folded in for good: pipeline-cache.bin is written once, before play, and the play file removed. The preparation modes fold it at any size and build into the one file as before. The library warm's threads create with no cache of ours, so their libraries reach the driver's own cache alone.

Checked with --probe-prewarm on a copy of a dev folder's caches (3,212 recorded pipelines, 333 compute shaders), no game run: with a filled pipeline-cache.bin every pipeline came from it and neither file was written; with none and a cold driver cache the compiles went into pipeline-cache-play.bin (75.9 MB written, pipeline-cache.bin not created); the next start merged it and wrote pipeline-cache.bin once (191.1 MB) and removed it; kept below the fold size, a play file of 68.8 MB gave 1,445 pipelines at 0.3 ms from the first cache where 470 hit without the merge, and was not written again. Not checked in play: the saves during a session, the library warm without a cache, and drivers other than NVIDIA's.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 04:56:26 -05:00
chrg6
84b0672ec2 Stop retiring textures no shader sampled for a while, by default: the ground they left flat did not come back.
With the retiring on, a player's session lost the ground of Hyrule Field and Lon Lon Ranch (6,663 retired, 928 back), and with the two holes of the way back closed it lost it again on arriving in a village (1,441 retired, 82 back; neither fix acted once). With the retiring off the same play kept its ground. What keeps the stand-in in place is not found; a draw that samples it once into a picture the game keeps would, and no mark undoes that. tex_disuse_evict = 1 turns the retiring back on; the shaders keep their marks, so no pipeline changes either way. Released textures and idle ones the game no longer names still give way when memory runs short, so a PC that is short of memory has less to give back than before.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 03:25:08 -05:00
chrg6
861357b2a4 Make the direct mouse camera work on game 1.1.1.
mouse_mode = direct is the default, but on 1.1.1 it did nothing: only the 1.4.3 patch table had the sites, so the mouse always went through the stick emulation, which gives no turn at slow mouse speeds and tops out at about 107 degrees a second. The 1.1.1 table now has the set mouse_direct (on by default): at main+0x37c45c, where the camera's input update holds the processed stick in s1 and s0, a host call performs the displaced store and adds the raw mouse counts to both, so the mouse meets no dead zone and no curve; at main+0x37c4f0 a second call clears the idle bit for an update the mouse moved in. The counts are divided by the frames the game steps per update and by the stick camera speed, so the same hand movement turns the same angle at every frame rate. The Controls tab gets the mouse mode and mouse sensitivity rows, and mouse_mode = stick or NX2NAVI_MOUSE_DIRECT_PATCH=0 gives the old behaviour.

Checked here: the generator lifts the 1.1.1 game with the two sites (it compares each site's original word), the lifted game compiles and links with the runtime, and tests/mouse_direct_check.py passes its 1.1.1 harness (register contract, displaced store and load, equal turn at every frame rate and stick speed, the reset pause, capture and mode). Not checked here: the game was not run, so aiming with the mouse was not tried, and the differential tests against Unicorn were not run because no Python on this PC has Unicorn. The contributor measured 0.0800 degrees per count on both axes in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit bb8fecfbe43517006eafd7be9c22e8dbe9601de7)
2026-11-11 02:36:54 -05:00
chrg6
acc1ae25bf Merge co-op, off by default: rooms through a relay, progress sync between the players' own saves, and a Co-op tab.
Without the other players drawn in the world, which are unfinished. No relay address is built in, and with co-op off nothing opens a socket. Built on Windows and tested against a relay on this PC only; two games in one room and any real network have not been tried.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 00:40:20 -05:00
chrg6
420aef041a Correct what a review of this intake's commits found.
A second reading of the commits taken in from pull requests found these, each traced in the code:

- heap_lazy: the camera speed's search read the whole heap, which with the setting on committed every page and undid what it saves; a scan now steps over the pages the lazy heap never committed (mem_untouched_run). tests/frame_step_check.py and tests/save_share_check.py no longer linked (frame_rate.c and fs_host.c call the new memory functions; the second also missed mem_probing before); both pass again. The settings text says that with the setting on a PC out of commit ends the game in play, not at start, and the census comment is back over its own function.
- Pipeline libraries on AMD's older Windows driver: the condition is the driver for RDNA 2 and older (RX 400 to RX 6000), not RX 5000 and RX 6000 only, and the texts named a price the code does not have. With libraries off a new pipeline is built by a worker while its draw is left out, and the start waits for every recorded pipeline instead of 20 s at most. The texts say so, and that the finding is one player's on one card. The menu strings nothing shows are as they were.
- Page file hint: it comes only when Windows sizes every page file, and it names the initial size and the automatic management that must be unticked first.
- Frame generation note: it keeps "needs an RTX 40 or newer" for the players it is right for and points the others to the log; the bridge's line says it is Streamline's general support check.
- Comments and settings texts that still described the old behaviour: the process commit bound, the wait with shadow storage, the scratch's least size, the action prompt under auto.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 19f03aa01b26d6e17fb5fc70ad987aa8c68e8225)
2026-11-11 00:39:50 -05:00
chrg6
ba9d6bac06 Keep co-op's private settings out of the log and out of bug reports.
This line logs every setting nx2navi.ini sets, and a bug report takes a copy of nx2navi.ini along: with co-op both would have carried a room's secret, the relay's address and the player's name to whoever reads the report, and the secret lets anyone into the room. One list (runtime/cfg_private.h: the room's secret, the offer number, the relay, the name, the key a maker removes, the menu's test hook) now serves the log's line, "Copy system info" and the report's copy of the file, in the game and in the launcher: such a key reads "(set, not shown)", every other byte of the file stays.

Also: the last leftovers of the restorations that were left out with the puppets (their settings prefix and section), main.c's byte order mark as it was, and two comments that cited files this tree does not have.

Checked: with a room, a relay and a name in nx2navi.ini the log's line shows all three as set and none of their values; the same text gives the same bytes through the game's scrub and the launcher's (a launcher test, and the C function built alone); the launcher tests, the co-op probe, the relay tests and the tab check pass.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 00:20:22 -05:00
chrg6
7e07e13bac Add co-op, off by default: rooms through a relay, progress sync between the players' own saves, and a Co-op tab.
Each player keeps their own game and save. One player makes a room, the others join it with its secret, and story flags and, by the room's rules, items, songs, quest items, small keys (a shared pool), rupees and ammunition reach every save. The layer is a host thread with one UDP socket to a relay the players run themselves (tools/coop_relay.py, Python's standard library only); the messages between the players are sealed with a key from the room's secret (XChaCha20-Poly1305, Monocypher 4.0.2 vendored with its licence and a row in THIRD_PARTY_NOTICES.md), every change is signed by the player who made it, a player accepts a room by its members' keys and the key of its rules, the save is copied to coop-backup before anything is applied, and values are set through the game's own routines between frames. The Co-op tab makes, joins, accepts, removes and leaves, and the menu takes typed text for the name, the relay and the secret. This is the contributor's pull request #518 on this line.

Nothing reaches the network while co-op is off: the socket is opened, and the relay's name looked up, only after co-op is on, a relay is set and a room is made or joined. There is no default relay.

Left out of the pull request: the other players drawn in the world (the "puppets") with the copied engine they need. They were unfinished, added two patch sites to the game's per-frame update that could not be put through the differential tests here, and their file helpers clashed with the ones this line already has. So no position is sent: the POS message's codec stays, nothing sends it.

Changed against the pull request:
- The menu's test hook drives the Co-op tab only when it comes from the environment. From nx2navi.ini it could turn co-op on, join a room and accept its offer.
- The log's label for a room is hashed from the secret instead of being its first three characters.
- A game that has not saved yet has no save to copy, and takes nothing from the room until it has saved once; that used to count as a copy made.
- A PING's token no longer carries the PC's uptime.
- On Windows the maker's key file and its folder get an access list with the player's account alone.
- The tests that link the platform layer get the socket library, and the save test a stand-in for the title screen's hook.

Checked on Windows, where the pull request had never been compiled: the runtime builds and links; --probe-coop passes (sockets on 127.0.0.1, the codec against its byte vectors, a fuzz of every parser, two sessions through a hostile mock relay, a relay restart, the sync engine); tests/coop_relay_test.py passes its 61 tests, with the probe through the real relay on 127.0.0.1 at 0 and 30 % loss; tests/coop_page_check.py passes and its deliberate fault fails 48 checks. Not checked: two games in one room (one game runs at a time here), any real network, the tab in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-11 00:11:41 -05:00
chrg6
47f6aef2f6 Turn the piece release of the lazy write-back off by default: with it on the graphics device was lost after some save loads.
Loading a save in Hyrule Field at night lost the device about 2 s after the load in 7 of about 22 loads on an RTX 5090 (a GPU read fault at the start of a large buffer, in or right after one of the game's compute dispatches). With the lazy write-back off it loaded 10 times of 10, and with only the piece release off 15 times of 15. How the piece release leads to the fault is not known; until it is, a CPU touch releases its whole range again, as before the town performance pass. wb_lazy_chunk = 1 turns it back on.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 23:56:29 -05:00
chrg6
097b5e75b4 Merge the pull request intake: fewer than six cores, a comma in the game folder's path, the pipeline cache's size check, video memory and commit handling, and smaller fixes.
The two sides both made the wait after a frame's first submission cover the write-backs under shadow storage; the rule is kept in one place, vk_sync_wb_split.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 23:35:05 -05:00
chrg6
f29e34e7a0 Make the observer-response scene mapper the default HDR tone mapper, anchored to the game's mid grey and tone slope.
The HDR tonemap gains a mapper built on a finite cone response in LMS: scene grey 0.18 lands where the game's curve puts it and rises through it with the slope of the game's curve, and the hue bend of the game's clamp is given back to bright colours. It takes the scene before the game's exposure gain and the gain itself, which the splice now finds in the game's shader. The luminance mapper stays selectable and the game's own curve stays the third choice. The mapper fits the Rec. 709 gamut here, as the game's scene target holds no negative component. New settings: the tone mapper's mid grey, tone slope match, tone slope and hue clip emulation. The gamma correction on the present applies with the luminance mapper only.

Not part of this: eye adaptation, the anti-aliasing and reconstruction shaders, bloom and local exposure sliders, the output colour space choice and a 16-bit float scene target. Checked by build and numerically against the source of the port; the picture on an HDR display has not been judged. THIRD_PARTY_NOTICES.md names the source.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 23:20:31 -05:00
chrg6
dda12051f5 Add heap_lazy (off by default): on Windows the game's heap is committed where it is first used.
Windows charges every committed page to the commit limit whether it is used or not, and the game sizes its whole heap up front: in Castle Town after Hyrule Field the heap held 6.8 GiB of commit of which 3.4 GiB had ever been used. With heap_lazy = 1 a change of the heap's size only moves its end, an access to a reserved heap page commits the reserved runs of the 64 KiB around it in the access-fault hook and runs again, and the paths that do not fault commit their range first: mem_thaw (file reads, the host-pointer import), mem_kernel_access (file writes, the frame-rate fix's read) and mem_host_readable (the host's pointer checks). A page another path committed is left as it is, so a frozen, probed or armed page keeps its protection. With trace = perf a line per window gives the faults, the bytes committed and the time they took.

The contributor's runs on a 16 GB PC: 4.67 instead of 6.77 GiB of heap committed and 29.3 instead of 32.9 GiB of process commit in Castle Town, no "system commit low", 12,858 faults in 440 ms over four minutes, the longest 41 ms. With the setting off nothing is hooked and the heap is committed as before.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 23:14:00 -05:00
chrg6
3ea3f5baa8 Leave the video memory in use out of this process's commit bound on Windows with a discrete card.
Windows charges a card's memory to the process's commit, and the bound on that commit defaults to the installed memory, at least 24576 MB. On a 16 GB PC with a 16 GB card (RTX 5060 Ti) the process stood at 29 to 31 GB in Hyrule Field, 9 to 10 GB of it video memory, so the bound held for the whole area while the system had commit to spare: textures gave way and the ground flickered white. The bound now compares the commit less the device-local memory in use, which is on the card and not in RAM or the page file and is bounded by the video memory rules already; the contributor's runs then never reached the bound and dropped no texture. The log line gives both figures.

A PC whose process commit is large mostly through video memory is no longer caught by this bound; the system's own figure still is. Not reproduced here: this PC has more memory than the bound.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 23:14:00 -05:00
chrg6
8bc23ea06e Clear a new depth image where the game makes it, not ahead of the part being recorded, and drop the depth copy switch.
A new depth or stencil image was cleared in the upload batch, which runs before the whole part being recorded. Bound into pool memory, the image shares its bytes with the live texture at its address, so the clear could wipe depth that earlier draws of the same part still read: the sun's shadowing went fully dark for one frame a few times a minute where the game resizes its shadow maps. The clear now goes in at the replay's position, as it already did for reused images (depth_init_inline, default 1; 0 is the old order). The switch that copied the live image's depth into the new one is removed: every such image was cleared by the game before anything read it, and the copies cost smoothness.

From a contributor's diff and measurements at a town gate: 0 dark frames in 5,423 with the change, 12 in 2,728 without. Checked here on the combined build in Hyrule Field before the Market's gate: every new depth image is started at the replay's position, none in the upload batch, and none had to end an open pass. The dark frames themselves were not counted here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 23:10:34 -05:00
chrg6
6750e0bee1 Turn graphics pipeline libraries off by default on AMD's Windows driver for RX 5000 and RX 6000 cards.
That driver faults inside vkCreateGraphicsPipelines when it links the stage libraries of a burst of new pipelines. The game asks for one when an enemy dies and its effects are drawn for the first time, so the game ended with code 71 at every kill on an RX 6700 XT and an RX 5700 XT (issue #418), and the player who reported it found that gpl = 0 stops it. Unset, the setting is now off with that driver (vk_caps.amd_sc) and on everywhere else; gpl = 1 turns it on there, gpl = 0 off anywhere, and the caps line of the log says why it is off.

The price on those cards is that a new pipeline is built whole on the draw's path. Not run here: there is no AMD card. On an RTX 5090 the device probe reads "gpl yes" as before and "off by NX2NAVI_GPL=0" with the setting.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 22:57:58 -05:00
chrg6
28f78d4045 List the mesh draw switch among the settings, and count the given back pieces under the lock.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 16:46:05 -05:00
chrg6
1241efa458 Give back only the touched piece of a lazily written range, and say in the log why ranges are written back.
With the lazy write-back on, a village and Hyrule Field still merged 20 to 29 MiB a frame back into guest memory at
the end of every submission, inside the GPU work the game's fence waits for. The new log line (mem: lazy write-back
at frame N: written back and not armed since the last line) names the reason by bytes: none of it lay in frozen
regions or on pages that could not be armed; it lay in regions held after a touch. The game's CPU reads a few words
at the start of buffers its shaders fill (12 bytes into ranges of 6.3 and 15.2 MiB among others), about once a
second. Each read gave back the whole armed range and held every 2 MiB region it reached for 1 s, doubling to 32 s,
and nothing was armed in a held region.

A touch now gives back the 64 KiB around its address, fetched alone, and holds only that piece; the rest of the
range stays armed (wb_lazy_chunk, default 1; 0 is the old rule). More than four touches in one region within a
second are taken as a reader going through the range: that range goes whole and its regions are held as before,
and the region's touches go that way at once while it keeps being touched within a minute. Each of the first eight
touches of a log window is logged under the perf trace with its thread, address, range and what was given back.

Measured on one machine (NVIDIA, uncapped, frame generation off, scripted walks, medians over the windows of 46 s
of world clock):
- village: 121.8, 124.1 and 124.4 fps before; 138.0 and 135.4 with this change; GPU busy 4.8 to 4.15 ms a frame
- Hyrule Field: 101.1 and 113.1 fps before; 131.5 and 131.3 after; GPU busy 6.5 to 4.7 ms
- merged a frame: 20 to 29 MiB before, 1.7 to 2.0 MiB after
- faults on armed pages in 1,000 frames: 14 and 16 before, 17 to 18 after in the village; 19 and 23 before, 17 to
  21 after in Hyrule Field; time spent fetching the same (4 to 5 ms in 1,000 frames)
A run with synthetic reads of four armed ranges per log window (wb_lazy_touch = 4, 769 faults) ended without an
error. The picture of every presented frame of a village walk and a field walk (thumbnails, 10,131 and 9,531
frames) had no black frame. The village walk has single frames whose brightness jumps: 14 with the change and 28
without it in about 10,000 frames each; the two looked at, one of each, are jumps of the camera.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 16:44:02 -05:00
chrg6
f17f4f9bcc Decode the game's zstd files on the host by default on 1.1.1 as well.
That build kept the game's own decoder until its sites had been through a check run. The check has now run over a village and a field: 3,072 streams and 31.7 GiB of output compared byte for byte, none different. The game's decoder took about a fifth of the running time of the game's threads in a village and about a second of each area load. zstd_native = 0 keeps the game's decoder.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:33:28 -05:00
chrg6
62e8578aa2 Turn the lazy write-back off by default on every card of AMD's own Windows driver, and let the device probe print the fatal summary line.
The default was off only on AMD's driver branch for RDNA 1 and 2, on the grounds that builds with the default on had been measured on an RX 7900 XT. Those measurements were standing in Hyrule Field and walking through a village; the report this is about is of a game that ended in fights, on an AMD card the player did not name, and fights are where the lazy path is busiest. Nobody has played one on an AMD card under our eyes on either branch, so the exception is now AMD's own driver as a whole (wb_lazy_choice.h, by VkDriverId), until a card of each branch has played fights with wb_lazy = 1 and a log to show. The cost is the open-area frame rate of 0.7.0 on every AMD card under Windows; the RX 7900 XT figures in the draft notes come from builds that had it on by default, which the notes now say. wb_lazy = 1 still turns it on.

--probe-vkdevice prints the line a fatal error or a crash adds to the log, so its wording can be read without a failing run. On an RTX 5090: "fatal: gpu NVIDIA GeForce RTX 5090, driver NVIDIA "621.01" version 621.1.0.0; memory mode mirror, lazy write-back on (the default on Windows (wb_lazy = 0 turns it off)); texture detail not chosen yet (no texture made)", and with the reporting player's nx2navi.ini beside the exe "lazy write-back off (wb_lazy = 0 is set)", after a start whose log names async_compute, vram_safe_mode and exception_handler as no settings of this version.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:20:47 -05:00
chrg6
caf50ecf1c Turn the lazy write-back off by default on AMD's driver for RX 5000 and 6000 cards, and say in the log which settings a run had.
A player on an AMD card reported crashes in fights and that a line added to nx2navi.ini cured them. That line, async_compute = 1, is no setting of the game, and neither are two more in the same file; the one line of the file that changes how memory reaches the GPU is wb_lazy = 0. A second report, an RX 6600 on 0.7.1, lost its device 3.5 minutes into play with the lazy write-back on. Neither proves it the cause: the player changed several lines at once and sent no log, the RX 6600's last pass mark is inside a draw pass and not a fetch, cards with 8 GB lost their device the same way on NVIDIA before the lazy write-back existed, and reading the fault handler, the fetch, the arming and the buffers' lifetimes found no failure path. What depends on the driver and cannot be checked without the card: pages of guest memory are inaccessible while a host-pointer import of them is bound and written by the GPU, and Vulkan calls run inside the access-fault handler.

The default is now decided once the driver is known (wb_lazy_choice.h, vk_memory.c vk_mem_lazy_decide): on under Windows as before, except on AMD's driver branch for RDNA 1 and 2, which none of us has run it on; AMD's driver for RDNA 3 and newer keeps it on, since builds with that default were measured on an RX 7900 XT. What the player sets wins everywhere, and one line at start says the choice and its reason. On those cards open areas run at the 0.7.0 frame rate again (on an RTX 5090 that was 65 fps against 90 in Hyrule Field; not measured on AMD). tests/wb_lazy_check.c checks the choice by platform, driver and setting without a GPU.

For reports of this kind the log now holds what was missing. At start: every setting nx2navi.ini sets, and in one line the keys that are no settings of this version and do nothing; the settings menu shows those in its bottom row. At a fatal error or a crash: one line with the card, its driver, the memory mode, the lazy write-back with its reason, armed ranges, fetches so far and a fetch in progress, and the texture detail (dispatch.c rt_fatal_note_add, vk_device.c fatal_note), since a report is often the end of a log alone.

--probe-cfg loads the player's file: the three lines are named, and the menu's save keeps them and every other line it does not change byte for byte. Nothing here ran on an AMD card, and no fatal error was provoked to read the new line.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 15:14:25 -05:00
chrg6
e8f5f8e01e Merge branch 'main' of https://github.com/tangerineturtle1/NX2navi into test-all-fixes
# Conflicts:
#	runtime/cfg.c
2026-11-10 14:27:47 -05:00
chrg6
61c4c873d5 Merge branch 'claude/pipeline-stutter-110e1b' into test-all-fixes
# Conflicts:
#	docs/building.md
2026-11-10 14:18:29 -05:00
chrg6
c98a918a34 Merge branch 'claude/pr-intake-4-947f9e' into test-all-fixes
# Conflicts:
#	runtime/vk_texture.c
2026-11-10 14:18:21 -05:00
ordinarybob
ce206a9239 Order passes and dispatches by the game's own barriers on NVIDIA graphics cards, which takes about a tenth off the GPU's time for a frame.
Every pass begin and every compute dispatch recorded a full barrier, which makes the GPU finish everything before each of them. With barrier_game = 1 (NX2NAVI_BARRIER_GAME) a pass after an earlier pass gets a barrier for its attachments only and a dispatch after other dispatches gets none; a change between drawing and compute keeps the full barrier, and so do the game's own barriers and the replay's copies, clears, fills and uniform updates. On an RTX 5090 at 2560x1440 the GPU's time for a frame fell from 5.4 to 4.9 ms standing in Kokiri Forest (two in-run A/B runs, the control's blocks differ by 0.7 %) and from 5.1 to 4.4 ms on a walk through it. The frame rate did not change there, because the replay thread is the limit on that machine; it should rise where the GPU is.

The default is 1 on NVIDIA graphics cards only, and 0 on every other vendor's: the game placed its barriers for an NVIDIA GPU, Vulkan asks for more of them than the game recorded, and no AMD or Intel driver has run this. 34 screenshots across the A and B blocks of one run show the same picture on NVIDIA. NX2NAVI_TRACE=perf logs the barriers a frame by kind.

From pull request #389, which had it on for every vendor; the default by vendor and the settings text are added here. The validation layer's synchronization check could not be run on this machine.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 14:08:48 -05:00
epicmeme546
da0d0be700 Read occlusion query results in batches, and wait in the submit call for the game's signal that the frame's data is written.
Both are about the time between two frames. Ocarina waits for the previous frame's fence before it lets the next frame's GPU work start: its main thread signals an event from the CPU, and the main queue's commands begin with a wait for it.

The completion thread ran a submission's callbacks before it let the submission's waiters go, and the occlusion counts were among them: one vkGetQueryPoolResults and one vkResetQueryPool per reported query, about a hundred queries a frame in Hyrule Field. On an RX 7900 XT (26.10.1) each call goes into the kernel, 3.9 ms of every frame, so the fence was reached 4 to 6 ms after the GPU had finished with every game thread waiting. Slots come from the ring in order, so one call now reads up to 256 slots from the one asked for, the available results are kept for the segments that follow, and the slots taken are reset in runs (vk_exec_xfer.c oq_take, NX2NAVI_OQ_BATCH). Standing in Hyrule Field at 3440x1440 with FSR: 52.7 fps against 44.6, the longest frame of the measured minute 46 ms against 55; the completion thread spends 0.3 ms a frame in the callback.

When the CPU's signal came a millisecond or two after the main queue's submit call, the submission took its copies, stopped at the wait and was held; the render thread polled the event, presented, and the present replayed the frame under a value the game's fence does not stand for. The next frame then skipped its wait for the GPU and was replayed inside its submit call, and frames of 23 and 15 ms took turns. A submission that begins with a wait for an event the CPU has signalled before now waits for the signal in the submit call, before its copies are taken, 10 ms at most (vk_exec.c vk_exec_gate_wait, NX2NAVI_GATE_WAIT_MS): 54.5 fps and a longest frame of 33 ms in the same place, 58.6 fps with the recorder thread on. With a camera sweep the pictures went out 21.0 ms apart on average with a 99th percentile of 55 ms, against 25.4 and 64. A village went from 48.6 to 53.7 fps and a graveyard from 56.5 to 64.2. 900 consecutive frames of a still scene show no dark or changed frame, with the recorder thread and without.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 13:37:12 -05:00
chrg6
df0db643ed Add a test switch that lets a new depth image take the live one's depth.
A contributor traced the one-frame dark shadowing at the castle town gate to depth targets the game remakes at other sizes about a thousand times a minute: the new image started cleared, so everything near the camera read as in shadow for a frame. With depth_alias = 1 a depth-only image of the same format copies the live one's depth for the region both cover. Their three runs each way showed 6, 4 and 0 dark frames without it and none with it; the cost of the copies and other scenes are not measured yet, so it is off by default.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 13:19:51 -05:00
chrg6
0a502ecf65 Let the pick-up window's number count at least one a frame, so the window closes above 60 fps.
The window that shows a pick-up above the character counts its number up to the new total by a whole step a frame and closes once they are equal. The game rounds that step down, and below one 60 Hz frame per update it was 0: above 60 fps the window stayed until the area was left, and for larger amounts the counting sound was started again every frame. The step is now floored at 1, switchable with pickup_count.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 13:10:34 -05:00
epicmeme546
e38f42a959 Test for NaN on the bits of the number on AMD's driver for RX 5000 and 6000 cards, so that no shader compiler can leave a test out.
The reports of black and white blocks on Navi, on Link next to her and on bright surfaces seen from inside a house come from RX 5000 and 6000 cards, whose Windows driver compiles with "AMD proprietary shader compiler" (vk_caps.amd_sc); an RX 7900 XT (LLPC) draws the same scenes clean. The game's shaders test for NaN with OpIsNan in 48,717 of an install's 54,959 translated modules, 26 tests each on average, and the translator's guard that keeps NaN out of every float colour output, so that one bad texel does not spread through blur and bloom into blocks, is such a test too. SignedZeroInfNanPreserve asks the driver to keep those tests; whether that compiler does is not known.

With that driver, vk_pipeline.c spirv_nan_bits now turns every 32-bit isnan, scalar or vector, into (bits & 0x7fffffff) > 0x7f800000 on the number's bits, and a float select with a constant whose bits are a NaN into a select of the bits (issue #156), when the module is created. NX2NAVI_VK_NAN_BITS=1 does it on every driver, 0 on none. Run over every module of an install's shader cache, the rewrite changed 1,281,675 tests and 57 selects with every output well formed (each id defined once, below the bound, the uint types declared once); --selftest checks it on a small module, and Link's house with it forced on (RX 7900 XT) draws as without it. Not yet tried on an RX 5000 or 6000 card.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-10 13:08:03 -05:00
Chris Toph
5374d04d0f Keep an optional history of GPU address ranges, so the report of a lost graphics device can name what held the faulting address.
After a lost device the driver's fault report gives an address and nothing says what was there. With va_report = 1 (NX2NAVI_VA_REPORT, off by default) the game keeps every address range the driver binds to a buffer or image and every range it unbinds (VK_EXT_device_address_binding_report, runtime/vk_vaddr.c). The report of a lost device then names the ranges that covered each faulting page, or the nearest ones when none did, and vaddr-history.txt beside the log holds the whole history, also when the driver gives no fault report. With 2 the call stack behind each range of 1 MiB or more is kept too. A player sees nothing of this unless the setting is on: without it no extension is enabled and no callback runs.

From pull request #349. Its second part, which stops a frame dump from turning on mesh query statistics, is left out: it changes what a dump writes for everyone who uses one. Built for Windows; no device was lost to try it.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 12:50:56 -05:00
Michael Schienbein
919aa7b2a8 Let the mouse camera in stick mode reach the game's top turn speed at a camera speed above 1.
With the mouse camera in stick mode and a camera speed above 1, the mouse could never turn faster than a full stick does at camera speed 1, however high the mouse sensitivity was set. The mouse's counts were limited to full tilt first and divided by the camera speed afterwards, so at camera speed 1.5 the most the mouse could send was two thirds of full tilt, which the game's own factor brought back to the old top speed. The division now comes before the limit (runtime/input_map.c input_mouse_stick): a slow movement turns as far as before, and a fast flick reaches full tilt, which is the game's top speed with the camera speed in it. Direct mouse mode, the default, does not use this code. A camera speed of 1 or less behaves as before.

From pull request #424. tests/mouse_stick_check.py is new here: it builds input_map.c alone and checks the deflection at each camera speed without the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 12:48:50 -05:00
chrg6
5988871aba Pick texture detail one step lower where ASTC textures stay uncompressed on a card under 20 GB.
The automatic levels assume the ASTC textures end as BC3. Decoded on the CPU or with the BC3 pass off they stay RGBA8 and take four times the memory, which is what one mip level left out gives back. A card with 8 GB that decoded on the CPU went 560 MiB over its budget and lost its device.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 12:40:11 -05:00
chrg6
bfcefe6fa2 A frame no longer stops for the pipelines of an area's first frame: passes the game renders frame after frame stay per-frame through a loading screen, and the waits that remain share 50 ms a frame.
A draw whose pipeline is still building is skipped when its pass is rendered every frame and waits otherwise, so that a lookup table or a volume generated once is not left empty. "Every frame" meant "in the last four frames", so after a loading screen or a full-screen menu every pass of the first frame read as new: each draw with a new pipeline waited on the replay thread, up to 30 s each, and a mesh draw, whose pipeline has no fast link, for its whole compile. A player's 0.7.1 log shows it at three area changes: frames of 954, 1015 and 684 ms with 853, 960 and 663 ms of pipeline wait, six mesh draws waiting 52 to 660 ms in passes whose targets had been rendered in thousands of frames.

The target history (now runtime/vk_target_frames.h) also counts the frames each target was rendered in, for as long as it is the same guest texture. From eight frames on its pass is per-frame however long ago the last one was, and its draws are skipped and built by the workers like any other (pipe_skip_steady, on by default). A target rendered for the first time still waits, now from one pool of 50 ms a presented frame that the full-screen draws share (pipe_frame_wait_ms; oneshot_budget = 0 gives the old wait back), a mesh draw 8 ms at most, and the wait for a one-shot draw's shader comes from the same pool (gfx_shader_await takes a limit). A full-screen draw with no picture left to hold waits 40 ms more instead of 500. One frame so waits under 100 ms for pipelines in all.

Every 600 frames with a miss the log says how many draws found a shader or pipeline missing, how long they held the replay thread in all and in the worst frame, by the kind of wait, and how many were skipped at its end.

tests/target_frames_check.py replays the area change of that log against the header. Not yet run in the game.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 12:02:12 -05:00
chrg6
63c7d3cb74 Make the frame limit count the frames the game draws, with frame generation on top.
The limit counted the frames on screen, so the game was paced at the limit over frame generation's multiplier: 60 at 4x drew 15 frames a second, and each step up of the multiplier took drawn frames away. Now a limit of 60 at 4x is 60 drawn and 240 shown. Only the display choice still counts the screen's frames, since a frame past the monitor's refresh is never seen, and with no limit set the default is 60 drawn rather than the monitor's rate.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 11:48:24 -05:00
chrg6
0e16e58cf3 Merge the shader stutter fixes into the combined test line.
Eight commits: a draw that misses its pipeline has the rest of its submission read ahead, the library workers link
the pipelines of skipped draws, a pipeline whose fragment shader reads a target of its own pass is fast-linked like
any other, and diagnostics. The merge was clean. Their before and after matrix had not finished when this was merged.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 11:05:17 -05:00
chrg6
381264165a Turn the lazy write-back on by default on Windows and take its row out of the settings menu.
The user asked for this once the flicker fix was measured. The single-frame flicker that kept it off in 0.7.0 came from frames drawn before the game's signal that their data was written, which the previous commit fixes; the lazy write-back only made the frames come faster, so the signal fell into the replay more often. wb_lazy = 0 in nx2navi.ini still turns it off, and an ini that already holds the key keeps its value. Elsewhere than Windows the default stays 0, as its fetch inside the access-fault handler has never run there.

Measured on the build of the previous commit, 1,800 presented frames a run, standing in Hyrule Field by day with DLSS Performance, frame generation 4x and HDR. With the lazy write-back on and eight busy threads beside the game: 38 and 0 single-frame spikes with the fix switched off (408 and 44 frames whose signal came during the replay), 0 and 0 with it on (667 and 724 such frames). With it off and the same load: 0 spikes in four runs, two with the fix and two without, 86 to 140 such frames each. Without load, one run each: 88.5 frames a second with the fix against 93.3 without it with the lazy write-back on (GPU 7.2 against 6.8 ms a frame, 6.53 against 6.48 submissions a frame), 71.0 against 65.6 with it off, so the fix's cost is inside the run-to-run spread; every run ended cleanly without a fatal error. This build was started once with no setting anywhere: the lazy write-back was on, and the Screen tab shows no row for it.

Not measured: play by hand with the lazy write-back on and the fix (the user's sessions so far ran with it off), other areas than Hyrule Field, and more than one run for the frame rates.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 10:52:11 -05:00
chrg6
fdf2fb89d3 A draw that misses its pipeline has the rest of its submission read ahead, and the stage libraries of the pipelines the later draws need are queued at once.
The next draw with a new pipeline was only found when the replay reached it, so the draws of an area's first frame,
or of a turn that brings several new materials into view, paid for their pipelines one after another while the
workers that could have built them together sat idle. The submission is recorded before it is replayed: the first
draw of a submission that finds a shader or pipeline missing now has the ops after it read (vk_exec.c vk_exec_ahead)
with the binds that decide a draw's shaders and shader libraries applied to a copy of the replay state. Each draw
there looks its shaders up as the real draw will, which also queues a shader that is not in memory, and names its
state to vk_pipeline_hint, which queues the pre-rasterization and fragment shader libraries that are missing. No
pipeline is entered and no key recorded, so a wrong guess costs two libraries at most. The draw's own lookup then
links on its thread when both libraries are there.

On a first visit to Kokiri Forest a scan read 6,900 ops in 0.78 ms on average (the longest 5.5 ms; a scan ends
after 3 ms), and the scans of the load and the walk named 377 states without a pipeline and queued 104 libraries
for them.

pipe_ahead = 0 (NX2NAVI_PIPE_AHEAD) turns it off.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 10:00:20 -05:00
chrg6
b121f90e41 The library workers link the pipelines of skipped draws, so a burst of new materials is linked on several threads instead of by the one pool worker that is not inside an optimised build.
A draw that is skipped while its pipeline builds leaves the pipeline to the pool: a job is fast-linked first and goes
back in the queue for its optimised build. The pool keeps one worker out of optimised builds; with the other three
inside one (100 to 350 ms each) that worker linked every new pipeline of a burst one after another. The library
workers, which so far served only draws that wait, now take the fast link of a draw-queue job too (vk_pipeline.c
fast_take, lib_worker), and there are as many of them as pool workers (four on sixteen logical processors, two
before).

Measured on a first visit to Kokiri Forest (RTX 5090, libraries in the driver's cache): of the 444 pipelines draws
missed, 180 took over 50 ms to become usable, the longest 1.3 s, and their draws were missing from every frame until
then. With this change and the two beside it (feedback loops, the look-ahead) 23 did, 19 of them mesh pipelines,
which have no fast link.

pipe_fast_workers = 0 (NX2NAVI_PIPE_FAST_WORKERS) gives the old behaviour.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 10:00:19 -05:00
chrg6
1d9b0dc962 A pipeline whose fragment shader reads a target of its own pass is fast-linked like any other: the feedback loop flags are part of the fragment output library.
Such a pipeline (soft particles and water reading the depth buffer, full-screen passes that read the target they
write) had no fast link: gpl_link refused it, so its draws were skipped during, or waited for, the whole optimised
build. The flags belong to the fragment output state alone, so the fragment output library carries them and its key
names them (FoKey.fbl); the shader libraries are the ones the same shaders use without a loop.

Measured on a first visit to Kokiri Forest (RTX 5090, stage libraries in the driver's cache, DLSS Frame Generation
on, where no frame is held back and a full-screen draw waits on): full-screen draws of such pipelines waited 267, 42
and 61 ms in the area's first frame and 410 ms in the middle of the walk; fast-linked they wait 2 to 3 ms.

gpl_feedback = 0 in nx2navi.ini (NX2NAVI_GPL_FEEDBACK) gives the old behaviour.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 10:00:19 -05:00
chrg6
cdaab81727 Merge the texture detail setting into the combined test line.
One conflict, in the build kit's notes, which keep both the shader cache item and the Texture detail text.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 09:51:33 -05:00
chrg6
8603b0e1e9 Add the texture_detail setting, which makes large ASTC textures without their largest one or two mip levels on cards with little video memory.
The textures of a loaded area are what fills a 6 GiB card: with the budget taken as 4,730 MiB a walk through Castle Town held 6,907 MiB of device memory, 4,302 MiB of it textures, 201 pools were refused their mirrors and the game ran at 20 fps. With texture_detail = reduced a mipmapped 2D or 2D-array ASTC texture of 256x256 and more that the game's CPU fills is made without its largest level, with low without its two largest when it is 1024x1024 or more. The same walk then held 5,472 MiB (textures 2,357) and 4,987 MiB (textures 1,997), and the ASTC texels decoded fell from 2,589 M to 826 M and 503 M. auto, the default, picks full from 8,192 MiB of device-local budget, low under 6,144 MiB and reduced between. full changes nothing.

The image holds the game's levels from the one it starts at (VkTexImage.skip), and the upload with its ASTC regions and BC3 encoding, WriteTexels, the write-back, the views and the sampler LOD clamp of combined bindings count from there. Render targets, storage images, 3D and cube textures, small and unmipped textures and textures the device samples as ASTC itself are left whole, as is a texture made over a live one that holds GPU-written content. A shader that fetches texels by position or uses a texture's size gets the texture whole: gfx_shader.c marks such bindings from the SPIR-V (the layer count of an array, which the translator's layer clamp asks for, does not count), and the replay makes a reduced texture bound there again with every level.

Not run on a card with 6 GiB: the figures come from an RTX 5090 with NX2NAVI_VRAM_BUDGET_MB=4730.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 09:38:07 -05:00
chrg6
a1fcbb0b07 Name NVIDIA's Shader Cache Size limit when the library warm finds the driver's cache cold.
The driver keeps the prepared shaders' libraries in its shader cache, and under Windows that cache has a size limit
set in NVIDIA's settings. A limit smaller than the set drops the oldest libraries as new ones come in (a 2048 MB cache
could not hold them on the reporter's RTX 5070 Ti), so every start builds them again in the background and play
stutters until that is done. The cold lines of the library warm now say so on NVIDIA under Windows, most plainly when
the cache is cold right after a warm that finished on the same driver; the build kit's notes and the example file say
it too. tests/warm_hint_check.py checks which hint each case gets.

From pull request #403 by tarballz; two conflicts resolved (an include and the build kit's notes).

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 09:13:35 -05:00
chrg6
d0b15e4578 Merge the two performance changes into the 0.7.0 release line: a signalled event wakes only its own waiters, and a thread of its own writes the log.
One conflict, the list of setting names, which keeps both sides' additions.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:32:34 -05:00
chrg6
449b5f73b0 Merge the Linux pull requests into the 0.7.0 release line.
Eighteen commits, one per Linux pull request that was not in yet: the build fix for a source checkout, NVIDIA's shader
disk cache only with NVIDIA's driver, tools/run_game.py for a Linux game folder, a memory limit the low-memory handling
can read, the recording thread's core on Linux, shadow storage on Linux and Proton, the Steam Deck profile and prompts,
FSR 3.1 offered only where its library loads, DLSS frame generation through NGX on Linux, the AppImage with its window
and its workflow, and the processor level from /proc/cpuinfo. Two conflicts: the settings table keeps the area-load
settings under the new comment, and the example file keeps the lazy write-back as off by default and adds that it
stays off with shadow storage.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:31:55 -05:00
chrg6
a03e059d2b Write the log from a thread of its own, so a stalled write no longer holds the thread that logged.
Every log line was two writes on the thread that logged it, to stderr and to the log file. Such a write can stall for
tens or hundreds of milliseconds (a busy disk, a virus scanner, a console or a pipe that is slow to take it), and the
render thread logs too: a frame it spent in a write was a hitch with nothing else to show for it.

In a game run the lines now go into a queue that a log thread writes out in order (runtime/logq.c). A fatal error,
the crash report and the end of the process write the queue out on their own thread first and write their own lines
directly, so nothing is lost to an exit. A thread that finds the queue's lock held for long, or the queue full, writes
its line itself. NX2NAVI_LOG_ASYNC=0 writes every line where it is logged, as before.

Every write is timed in both modes: a "log: ... writes of the log took over 2 ms" line counts the slow ones, gives
the longest and says whose time they took.

tests/logq_check.py checks order and completeness with eight threads, a slow destination, a stopped destination with
the queue full, and the synchronous flush.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:22:41 -05:00
chrg6
c2a51a334a Merge GitHub main into the 0.7.0 release line: uniform blocks copied at the submit call with the replay on its own thread, the overlay's frame times measured where the pictures go out, and early pictures kept back.
The two commits main gained since the last merge. docs/releases/v0.6.2.md stays removed; the two notes they added to
it are in docs/releases/v0.7.0.md. Checked on a dev build of the merged tree: the settings, self-test, graphics ABI,
input and kernel probes pass, and a scripted run with six DLSS mode changes presents no dark or black frame, makes the
area's textures in one frame at the load and ends without a fatal error.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:17:01 -05:00
chrg6
094573bd26 Wake only the threads that wait for the event that was signalled.
A signalled kernel event, or a thread that ended, woke every thread blocked in WaitSynchronization. Each woken thread
takes a virtual core before it looks at its handles, asking a running thread of lower priority for its core when all
are held, finds nothing signalled and blocks again. The audio renderer signals its event 200 times a second, so every
thread that waits for a message, a timer or another thread's end did this 200 times a second at the cost of the
threads that were working.

A wait now records its handle list, and a signal wakes the waits that hold a handle of the signalled event or thread.
NX2NAVI_SYNC_WAKE_ALL=1 (or ab) wakes them all as before, and the sched line counts the waits woken and left asleep.

tests/sync_wake_check.py builds kernel.c with the rest of the runtime stubbed and checks the wakes, the timeouts, the
cancel and that none of 4,000 signals to eight looping waiters is lost, in both modes.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:15:30 -05:00
chrg6
9dbfed207f Turn the lazy write-back off by default and offer it in the settings menu as Experimental FPS boost.
With it on, single frames come out with the whole scene lit differently (brighter, shadows off). The flight recorder's
thumbnails of 1,800 presents standing in Hyrule Field show none with it off in every run, and with it on 43 to 181
while four other threads keep the CPU busy (10 to 97 in earlier runs, 0 on an idle machine); the cause is not found.
Two candidate fixes (arming only against a sync whose copies were handed over, and snapshots waiting for GPU writes in
flight) did not change the count, and fetching at every release made it far worse.

So wb_lazy is 0 unless set, on every platform (mem_init loses its special case), and the Screen tab has the row
Experimental FPS boost for it on Windows, with its text in the four menu languages; like every setting read at the
start it notes "after restart". The 0.7.0 notes describe it as experimental and off, say about 1.6 GiB for the video
memory a full shader cache no longer holds (2,484 to 846 MiB at the title screen in the measured run), and list the
two fixes before this one.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 07:12:23 -05:00
chrg6
71eb5fbe26 Make an area's textures at once after a load instead of over the first seconds, which showed the ground and walls black.
The texture pool creates 16 entries a refresh and stops after 6 ms a frame, so that textures streaming in do not make
long frames. An area load leaves thousands of slots at once (4,936 loading the test save), and at that rate they came
in over the frames after the load screen: the scene's first frames showed a quarter of the picture as black stand-ins,
for 22 presented frames on a free machine and for about three seconds with the CPU busy.

While a refresh leaves pool_load_backlog slots or more (512; 0 never), the pool is loading: the count limit is off, a
frame's refreshes may take pool_load_ms (50), and frame_hold leaves out the presents of frames drawn meanwhile (up to
2 s), so the picture before the load stays until fewer than 64 slots are left. Measured with the flight recorder's
thumbnails of every present: the 4,847 textures are made in one frame of 345 ms, 30 frames before the scene fades in,
and the black share of the picture goes from the fade straight to its final value. The streaming limits are as before
below the backlog.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:55:13 -05:00
chrg6
75b0dca907 Add Steam Deck button prompts beside the Xbox and PlayStation ones (prompts = steamdeck).
The Controls tab's Button prompts row and nx2navi.ini take steamdeck: the Deck's own labels in the game's
text, action prompt and ocarina notes, which are A B X Y where an Xbox pad has them, L1 R1 L2 R2 and L3 R3,
Menu and View. The style is drawn by tools/pad_prompts.py like the others, into romfs-patches-steamdeck
and romfs-patches-steamdeck-label, and every build with button art writes them.

Pull request #107 by loteran asked for PlayStation and Steam Deck prompts; it was closed, and the tree
took the PlayStation half in another form, drawn from button art instead of redrawn font glyphs. This is
the Steam Deck half in that form, written here: the art has no Deck style, so its entry in
tools/prompt_art.py names the Xbox pictures for the face buttons, Menu, View, the d-pad and the sticks
and the PlayStation pictures for the shoulders and stick clicks. It needs four pictures of the Xbox set
that no other style used (the white letters on a light button, for the ocarina's notes); a release made
with --prompt-art copies them with the rest.

The Windows files compile and tests/launcher_test.py passes, with the prompts step's test following the
number of folders (seven now); every picture the style names is in the art used for releases. The style
was not drawn here (that needs the game's font), and --probe-cfg, which has a new check, was not run.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:53:30 -05:00
chrg6
eb2608296b Generate frames with DLSS on Linux through NGX itself: 2x to 6x or dynamic, switched while the game runs.
DLSS Frame Generation went through Streamline, which only the Windows build has, so framegen = dlss did
nothing on Linux. There it now calls NGX's frame generation feature directly (vk_dlaa.c vk_ngxfg_*), with
the depth, motion vectors, jitter, camera and HUD-less picture the Streamline path gets. With it on, each
frame is composed into an image of its own instead of a swapchain image, the generated frames are made at
the end of the frame's command buffer, and a presenter thread shows them and then the rendered frame, each
copied into a swapchain image it acquires itself, spaced over the time between rendered frames
(gfx_present.c ng_*). fg_mult is the multiplier: 2 to 6, or dynamic for only the frames the display's
refresh rate needs. NVIDIA's libnvidia-ngx-dlssg.so.<version> goes beside the game; it is not in the
repository or any kit.

Pull request #124 by spidercraft. Its base was the present path of 0.5, so it is ported by hand:
- taken as written: the NGX calls and the presenter (the block is lifted from the pull request's diff);
- wired again into present_image, create_swapchain, the output rate and the HUD-less picture as they
  are now, with every new branch behind vk_ngxfg_wanted, which is 0 in the Windows build: the code is
  compiled there and never reached;
- added: frame generation's feature and parameters are released before NGX shuts down, the presenter's
  images, semaphores and command pool go when the device is released and are made again for a new one,
  and a failed submit on this path settles its fence without an acquire semaphore;
- the menu: the Frame generation row follows the setting at once on Linux and says "after restart" only
  when the game started without DLSS upscaling; the multiplier row lists what the GPU allows and Dynamic;
- the overlay row of the pull request it builds on (#123) is not part of this.
It touches vk_dlaa.c, which another session is changing: one field in N, the FG state after it, one FN
line, the instance extension query, the capability read in vk_dlaa_init, the release, and a block appended
at the end.

Known gap, as in the pull request: on this path fps_limit counts the frames the game draws. The Windows
files compile without new warnings; nothing was run, and the Linux path is not compiled here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:45:59 -05:00
chrg6
d985e0ecb0 Offer FSR 3.1 in the Screen tab only where its library can load.
On Linux the Screen tab listed the five FSR 3.1 upscaling modes and AMD's frame generation, but only the
Windows build loads amd_fidelityfx_vk.dll: a player who picked a mode got the scene at the mode's share of
the picture with nothing to scale it back up. vk_ffx_available answers from the load's result once it ran,
and before that from the library file being there, so the menu can ask every frame. Where it says no,
the menu lists neither, a mode that is still set shows "in use: off", the scene keeps the game's own
share (vk_dlaa_fsr3), frame generation keeps the plain swapchain with one log line, and the texts name
what does run.

Pull request #371 by mooki000, taken as it is; two hunks merged by hand (vk_fg_wanted, which now also
stays off after a failure, and a README line that had gained Texture filtering). It touches vk_dlaa.c,
which another session is changing: vk_dlaa_fsr3 gains the availability test and one log text changes.

On Windows the menu changes only where the DLL is missing. The Windows files compile; nothing was run.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:33:22 -05:00