NX2NAVI_SHADOW_CHECK=1 logs with the shadow line, every 60 frames: the whole copy-ins that overwrote a store a
shader made through the device address table, and the pools they fell on; the write-backs that moved bytes into
a page the CPU had written since its copy-in; the bytes both sides changed since their base copy; what the
copy-ins cost by kind, and which pools and flag sets took them. The stores are found by content: a whole
copy-in leaves a hash of the page, and the next one compares the shadow page with it first.
NX2NAVI_SHADOW_TABLE_STORES=1 keeps such stores: a page found stored into gets a base copy, so copy-ins take
only the CPU's bytes, and the fence of every submission that uses the table writes the stores back to guest
memory. --probe-vkmem checks it with a GPU write that nothing notes. It is off by default. The overwrite it
removes was the suspected cause of the flicker on Linux and is not: standing outdoors (RTX 5090 with
NX2NAVI_SHADOW=1) it happens exactly four times a frame, on ten pages in pools of 20 and 44 KiB, with the copy
that precedes the frame's stores, and no frame came out wrong with it or without it in 1,800 frames each; the
hashes cost 1.8 ms a frame of the replay (67 against 75 fps); and a count the CPU resets before the write-back
has landed would keep counting, where the whole copy-in resets it every time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Under shadow storage the copy-in reads each region's write-watch snapshot once per submission. The check ran
its two parts in one epoch, so the second part's copy-in did not see the CPU writes made after the first, and
the probe failed with NX2NAVI_SHADOW=1 ("GPU read of CPU-written heap differs"). Each part now starts a new
epoch, as a submission does.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
One conflict, in the build kit's notes, which keep both the shader cache item and the Texture detail text.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The probe takes the level from NX2NAVI_TEXTURE_DETAIL. It covers a 1024x1024 texture, a 256x256 array of three layers, and a 128x128 and an unmipped texture that stay whole, with the images as RGBA8 or BC3, and the sampler LOD clamp of a reduced texture. It passes at full, reduced and low on an RTX 5090, with NX2NAVI_ASTC_BC 0 and 1.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Whether a slot was stale was read from the released image's entry, which eviction, the released cap or a new image
at the address can destroy before the slot is looked up again; the slot then revived the texture from storage the
game had freed (the access violation in the block copy during a pool refresh). The flag now lives on the slot: a
release sets it on the slots registered with that descriptor, a registration clears it, and a finalized slot of a
CPU-written texture follows only live GPU content at its address.
From pull request #348 by TophC7, taken as it is.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With shadow storage (Linux, and Windows builds under Wine) a CPU-visible pool is a host-visible copy with
no memory object of its own, and only pools that owned one went into the device address table: pointers
the game's shaders read from memory reached nothing. Shadow copies are now in the table. A shader that
reads through the table resolves no pool, so nothing queued the pool it reaches for the copy-in: the part
is marked where its pipeline is drawn or dispatched (VkPipeInfo.gpa, vk_mem_gpa_use), and its prologue
brings the shadow of every pool in the table up to date with the CPU's writes and queues the same pages
for those pools' VRAM mirrors (vk_memory.c vk_mem_gpa_sync). --probe-vkmem reads a word through the table
from a pool that is never bound, before and after a plain CPU write.
Pull request #353 by TophC7, ported onto the base copies of the black-world fix:
- taken as it is: the table registration, the mark in vk_exec_draw.c and vk_pipeline.c, the prologue
call and vk_sync_probe_submit in vk_sync.c (two hunks merged by hand), the probe's test;
- written again: vk_mem_gpa_sync, on top of the snapshot-based shadow_sync_pool; a lookup no longer
queues a pool for being in the table, which every shadow pool now is;
- narrowed: the sync runs only with shadow storage. Without it (Windows) a mirrored pool stays unsynced
for the table's readers as before, so the frame there is unchanged, and the probe makes the source's
mirror only with shadow storage and skips when the device has no address table;
- the probe's shader was an array of SPIR-V words in tex_probe.c; it is now the source
runtime/shaders/gpa_read.spvasm, built like the other runtime shaders;
- the exact re-upload count in the texture probe stays checked on Windows.
Files other sessions are changing: runtime/vk_memory.c (vk_pool_init's registration, mem_resolve's touch,
the new section before vk_mem_use).
The Windows files compile and the shader assembles and validates; no probe was run, and nothing was run on
Linux here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
This pull request fixed lighting that added up frame after frame under shadow storage on Linux: a GPU write
noted while a part was recorded kept that part's CPU inputs (the game's resets of its lighting accumulators)
out of the shadow. Its fix marked noted ranges as submitted in vk_memory.c; the base copies that came with
the black-world fix already move every CPU-changed byte in before the part runs, so that part is not taken
and no SHADOW_PENDING_INPUTS setting is added. Taken from it:
- tex_probe.c (--probe-vkmem): a range noted as a future GPU write still gets the CPU's bytes before the
GPU reads it. The pull request's other check, that a CPU write made after a GPU result loses to it until
the write-back, is left out: with base copies the later CPU write wins, as it does on the console.
- vk_dump.c: NX2NAVI_DUMP_SHADERS=<hash>,... copies images only for passes that use those shaders, and
NX2NAVI_DUMP_RAW=1 also saves each copied image's texel bytes.
- tools/fix_linux_ambient_power.py, as it is: patches one translated shader of a player's own cache so a
zero exponent no longer gives NaN. It holds two hashes and no shader data.
Pull request #264 by intellq. The Windows files compile; the probe was not run, and nothing was run on
Linux here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
NX2NAVI_PROFILE_SLOW unwound threads in any module, and one being unloaded while the game started (a driver or vendor
DLL) had its unwind tables freed under the sampler. The exe and the system DLLs are walked freely; any other module is
held with GetModuleHandleEx for the step, and one that is unloading ends the chain. The block-linear copy probe gains
two cases of 256 KiB and more.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The NVN2 front end and the SM86 to Maxwell shader lowering (tools/xlate/AmpereLowering.cs, mesh and task stages,
bindless texture pools, BRX jump tables, the NVN2 compute c0 layout) with four translator patches (0017-0020) bring the
opening of the game to 58-60 fps on the Vulkan renderer.
This round fixes the haze: SM86 IPA is lowered as a plain Maxwell IPA.PASS (texture coordinates were corrected for
perspective twice); LDSM, TXD, both F2IP byte forms, HMMA, MOVM and HFMA2.RELU are lowered and spill mode has eight
uniform register groups; conditional rendering keeps the newest counter report per address and treats a report as
pending until its value is in guest memory, so occlusion tests and the depth clears around the depth copy behave; and
the upscaler stand-in decodes the post pass's sRGB picture before writing the linear target. Tensor-core programs keep
the stand-in unless NX2NAVI_NATIVE_TENSOR=1, because their lowering does not match the hardware yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>