Commit Graph

44 Commits

Author SHA1 Message Date
chrg6
63bcb441c0 Evict the least recently used idle textures when video memory runs low.
Above the VRAM pressure threshold (NX2NAVI_TEX_VRAM_PRESSURE, 90% of the budget) only released textures went before, so a scene whose live textures alone passed the budget kept growing into system memory. Once the released ones that come back intact are gone, live textures go too, least recently looked up first: only those whose content their storage still holds (CPU-written, never drawn into) and that no lookup reached for 240 submissions and 120 presents. The texture pool refresh looks every registered slot up each submission, so no live descriptor names them; the next use creates and uploads them again. Up to 64 per check, until the use is 2% under the threshold, and the next check waits for the GPU to pass the submissions that may still name the freed images. NX2NAVI_TEX_EVICT=0 turns it off.

Measured with the budget taken as 16 GiB (NX2NAVI_VRAM_BUDGET_MB=16384), same route, the exe at this commit and the next one: with the eviction off, 17,479 MiB in use in the world, of which 12,321 MiB textures, 37 MiB of them idle; with it on, 43 idle live textures (10 MiB) went in about 6,000 frames. In the world nearly every loaded texture is named by a descriptor, so the eviction frees memory mostly once an area or a menu is left. That run predates the later fixes (the idle clock in pool walks, the free space inside blocks); an earlier run without them emptied VRAM, as the commit that stops the evictions from emptying it says.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
dffd28f09b Let NX2NAVI_VRAM_BUDGET_MB lower the VRAM budget the memory decisions use, for testing.
With it set, the mirror budget check and the texture pressure checks compare with at most that many MiB, so a large card behaves as a small one does when video memory runs low. The heap lines still log what the driver reports.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
276325d9ff Add a PlayStation choice to the button layout.
pad_layout = playstation plays a pad by label as xbox does, named for a PlayStation pad: cross A, circle B, square X,
triangle Y. The prompts follow it like the Xbox layout, by label. Under Automatic the note says PlayStation for a pad
whose bottom button is labelled cross. The layout description in each menu language now says what every choice does.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
612c02311d Add Xbox and PlayStation button prompts, drawn from button art on the player's machine.
The Controls tab has a Button prompts row again, with Nintendo, Xbox and PlayStation. prompts = playstation is a new
value next to xbox; nintendo, xbox and pc read as before, and pc stays out of the row as nothing makes its files for
this game. The game reads its prompts at start, so the row says when a restart would change them.

tools/pad_prompts.py writes the overlay folders romfs-patches-xbox, -xbox-label, -playstation and -playstation-label
from the player's RomFS and a folder of button art that stays outside the repository. The button font's glyphs become
outlines traced from the art, the action prompt's letters and the ocarina's note buttons are painted again in their
own BC4 and ASTC formats, and the font's entry in the resource size table grows with it. The by-position folders show
Switch A as B or circle, the by-label ones as A or cross, following the pad layout. The settings probe checks the new
value and folder names.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
c71eeed305 Hold a present until the frame's held work is replayed, and sync held work that runs in an empty submission.
The event order (vk_exec.c) holds a submission at a wait whose signal has not been replayed. In Kokiri Forest dialogue several presents a second came with the frame's whole submission held (4 held submissions, nothing drawn since the last present): the present showed the picture from before, a flash of the whole picture, and the frame was drawn afterwards in the present thread's empty submission, next to the following frame. With the event order off (NX2NAVI_EVENT_ORDER=0) the same spot had no such frame in 3600.

present_held (vk_backend.c, synchronous replay only): at a present with held work, what can go on runs first in a submission of its own; if work is still held, the present waits and goes out after the submission that replays the last of it, at the next present, or after 8 submissions. present_held = 0 (NX2NAVI_PRESENT_HELD=0) turns it off.

held_sync (vk_exec.c vk_exec_record): a submission without commands of its own that resumes held work now gets the VRAM mirror sync before and the write-back after, and a uniform copy, like any submission. Before, that work read mirrors that had missed the CPU's latest writes, and its GPU writes were dropped from the write-back list by the next submission's vk_mem_mirror_begin. held_sync = 0 (NX2NAVI_HELD_SYNC=0) turns it off.

Not yet measured in play.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
e32fd15952 Take Ocarina's DLSS camera from the bytes the scene draws read, and log why a frame has none.
In Kokiri Forest dialogue (Saria, dlss = performance) about 1 frame in 20 had no camera, and DLSS started a new history twice for each: 24 to 26 camera resets per 300 frames. The camera block was looked up in the uniform copy of the submission DLSS ran in, which on those frames had none: the frame's work had been held past its present by the event order and ran in the present thread's empty submission. vk_dlaa_draw now keeps the camera rows as the first scene draw read them (vk_usnap_read), and mv_pass uses those. A frame with no scene-context draw at all keeps DLSS's history with zero motion, for up to 6 frames in a row.

Measured at the Saria spot: camera resets went from 24 to 26 per 300 frames to none in 3600 frames (the first frame only). The whole-picture flashes stayed: they come from the presents that go out with that work held, handled separately.

The log now explains frames without a camera, frames without the DLAA point (with the held submissions at that present), light target changes and a second scene after DLSS ran, plus a line every 300 DLSS frames with resets. dlaa_cam_keep = 0 (NX2NAVI_DLAA_CAM_KEEP=0) restores the old camera handling.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
3bb2ee71f9 Run guest shaders that use subgroup operations with maximal reconvergence when the driver supports it.
Guest code runs ballots and shuffles where the guest compiler had the warp reconverged, for example right after a loop
each lane leaves at a different iteration. Vulkan only promises that with VK_KHR_shader_maximal_reconvergence, so
the pipeline code adds the extension and the MaximallyReconvergesKHR mode to every module that declares subgroup
capabilities. vk_reconverge = 0 in nx2navi.ini turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
epicmeme546
754ded99e0 Raise the frame rate in Kokiri Forest and apply more settings during a run.
The foliage's sun shadows took most of the GPU time: one mesh draw shaded about 1,000 million fragments in the far cascade. The far cascade now shades them at a 2x2 rate, and the two far cascades drop one side of the double-sided cards. At the forest entrance the frame rate went from 18 to about 43 fps on an RX 7900 XT.

FSR 3.1, its frame generation and the console mode now take effect without a restart. The full performance overlay lists the settings shown in the options menu.

NX2NAVI_GPU_PASSES times each pass and counts its fragments, and NX2NAVI_SET_AT changes settings at a given frame for test runs. Both are off by default.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 02:40:51 -05:00
chrg6
0fab109a7f Add diagnostics used to find these fixes, all off by default.
NX2NAVI_TRACE=audio logs voices starting, stopping and sharing a wave buffer; NX2NAVI_DUMP_MOVIE dumps movie frames; NX2NAVI_LOG_CS_BINDS says why the stand-in for an untranslated compute program skipped a dispatch; and NX2NAVI_TRACE=perf adds heap and commit census lines on their own thread, with VMA maps when write-combined memory grows by 2 GiB. From a tester's fixes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
ac5c196f3a Pace DLSS Frame Generation with Reflex from the frame's start, so it no longer halves the game's frame rate.
Reflex's markers sat at the host present with frame numbers unlike the frame's tags, slReflexSleep was never called, and the low-latency mode was set before any swapchain existed, so it never applied. GfxBackend.frame_start, called from nvnWindowAcquireTexture, now sets the simulation and submit-start markers after Reflex's sleep (skipped once nothing was presented for 200 ms); submit end is set when the frame's submissions went out; the mode is set again after each swapchain (NX2NAVI_REFLEX: 1 on, 0 off, 2 boost); frames are numbered by the game's presents; and the fps counter counts what was shown. NX2SL_VERSION is 3, so nx2navi_dlssg.dll must be rebuilt. From a tester's fixes: 42-45 fps game, 84-90 on screen (was 24).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
95ab18fba2 Hold the game at 60 fps while a movie plays, so the intro's narration no longer doubles and the dream shows at high refresh rates.
The game's event script times the intro movie's narration and fades by counting updates as 60 Hz frames. At 144 fps everything ran 2.4 times early: each line started over the one before, and the closing fade hid the dream. frame_step_cap_ns caps the rate at the movie's 60 fps from the decoder's start to its end of stream (ov_movie_live); with fps_limit = unlimited the cap is the movie's rate. With RTSS limiting, the game's own limiter holds a new rate until RTSS has applied it. NX2NAVI_MOVIE_FPS sets the cap, 0 turns it off. From a tester's fixes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
29d8451dd2 Cap the memory released textures keep for reuse, and free old ones when the system commit runs low.
After an hour at 2160p the 2048 released entries held 5-7 GiB of render targets and decoded textures, charged to Windows' commit as well. NX2NAVI_TEX_RELEASED_MB caps them by size (default 1/16 of RAM, 1-4 GiB), and with less commit free than NX2NAVI_TEX_COMMIT_FREE_MB they are dropped to 256 MiB. Only entries released 120 frames ago or more go, at most 32 a check, oldest first. On Linux the commit check applies only with vm.overcommit_memory = 2 (plat_commit_enforced). From a tester's fixes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
2cd6f5290b Leave the boot prebuild's huge compute shaders to their first dispatch, so memory no longer climbs to 30 GB at the title screen.
Four play-recorded compute shaders of 0.87 to 4.4 million SPIR-V words (the game's tensor-core upscaler passes, which run through the stand-in here) are recorded and so prebuilt at boot. The driver spent minutes and gigabytes on each, four at once, none finished, and every start began again until RAM ran out and the screen went black. The boot prebuild now creates a compute shader over 512K words only from a pipeline cache (VK_PIPELINE_CREATE_FAIL_ON_PIPELINE_COMPILE_REQUIRED_BIT) and leaves it to its first dispatch otherwise. NX2NAVI_LIB_PREBUILD_BIG=<words> sets the limit, 0 the old behaviour. From a tester's fixes: memory flat at 13 GB on the title screen, prebuild done in 463 ms.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
b69b613984 Fix small settings and overlay edge cases.
- An empty NX2NAVI_SPIN or NX2NAVI_VRAM_HEADROOM in the environment stopped the game: both read the key with
  cfg_bool, and an empty value falls back to the settings table, where these keys have no row. Empty now means unset.
- find_ini checked for 10 bytes after the exe folder's separator where "nx2navi.ini" and its NUL take 12, so an exe
  path just under 1024 bytes wrote two bytes past the buffer.
- The performance overlay read the clock before taking the lock, so a frame pushed in between was newer than "now",
  the unsigned age wrapped and the overlay showed 0 fps for that refresh.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
b142b7a71a Quote a settings value on save when reading it back would change it.
cfg_load trims blanks around a value and takes one pair of quotes off it, so a mods_order list whose first mod's
folder name starts with a space, or a value that is itself quoted, came back different at the next start and the mod
lost its place and switch. Such values are now written in quotes; others are written as before. --probe-cfg checks it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
a8f34e48c8 Offer a 1080p game resolution.
The picture's height can now be 1080, below the game's own 1440, for slower GPUs: the scene, the DLSS and FSR 3.1
modes and frame generation follow it, and the ultrawide shapes become 2560x1080 and 3840x1080. "Native" keeps its
floor of 1440. The example settings file now documents game_aspect and game_res.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:47 -05:00
chrg6
22bbe674be Remove the read-back refresh of the VRAM mirror, which brought back the tree columns.
Copying the invalidated ranges from guest memory into the mirror at every submission put the guest's copy of those pages over GPU results that live only in the mirror. In adult Hyrule Field that wiped tree records, and the trees stretched into columns reaching the sky again. With NX2NAVI_READBACK_SYNC=0 the columns did not appear at the same spot. The memory check (NX2NAVI_MEMORY=verify) still finds mirror pages newer than guest memory there with or without the refresh, about 3 per 60 frames, which is left for later.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:47 -05:00
chrg6
9a8f74fe53 Refresh read-back ranges in the VRAM mirror, guard the boot pipeline prebuild against driver crashes and count out-of-order event waits.
Small ranges the game invalidates and reads back (the exposure meter) are copied from guest memory into the mirror at every submission that uses their pool, so a CPU write made between recording and the GPU's run is not lost; NX2NAVI_READBACK_SYNC=0 turns it off.

While the boot builds the recorded pipelines a marker file exists next to the pipeline cache. A start that finds it left over records the GPU and driver in pipeline-prewarm-skip.txt, and starts on them build those pipelines at their first draw instead.

CommandBufferWaitEvent is now recorded as OP_WAIT_EVENT. The replay waits for nothing but counts the waits it reaches before their signal, and how many submissions later that signal comes, in the NX2NAVI_TRACE=gfx frame line.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:47 -05:00
chrg6
42ae87bca6 Runtime: power opt-out, faster fence wake-ups, feedback barrier, texture re-upload skip
- Opt the process out of Windows power throttling (execution speed and
  timer resolution) at startup; NX2NAVI_POWER_FULL=0 turns it off.
- Fence completion thread wakes waiters before collecting freed memory,
  so collection no longer delays them.
- Add a by-region barrier when a draw or clear writes an attachment that
  an earlier draw in the same pass sampled; count it and inline uniform
  updates in the per-frame stats.
- Hash small texture contents at upload and skip re-uploads whose bytes
  are unchanged (removes ~420 redundant uploads per frame in Kokiri
  Forest); NX2NAVI_TEX_SAME=0 turns it off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 06:04:57 -05:00
chrg6
092379def8 Frame dumps keep each shader's guest program, and a test switch runs an edited SPIR-V in place of a compute shader.
NX2NAVI_DUMP writes sh_<hash>.code next to sh_<hash>.spv: the guest program the shader was translated from, as its
stored inputs hold it, for a disassembler (a compute program as it is, a graphics stage after its 128-byte header).
NX2NAVI_SPV_OVERRIDE=<dir> runs <dir>/<hash>.spv in place of the compute shader whose SPIR-V has that hash, an edited
copy with the same interface, to look at a shader's intermediate values in a frame dump.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 04:10:35 -05:00
chrg6
8daedbd806 Redraw the in-game menu with the game's own interface textures, and bring in the launcher's save import and faster builds.
In-game menu: the settings window, its tabs, rows, buttons and cursor, the performance overlay and the Preparing
shaders box are drawn with the game's interface textures where the RomFS holds them (runtime/ui/menu_skin.cpp,
perf_panel.cpp; plain shapes until they are decoded). Restart joins Continue and Quit, each behind a confirmation;
VSync is an on/off switch; DLSS is listed only on NVIDIA GPUs; the menu sounds are quieter; Picture shape is gone and
the setting descriptions are shorter; edge cases of input, layout and fonts are fixed. tools/menu_preview.py draws the
menu without the game.

Launcher: Import Saves takes a save from the game folder's saves/ folder or one the player picks; downloads fall back
to Windows' own certificate check when Python's refuses a server; updates are faster; the title bar is drawn in the
window and Navi is every icon. tools/make_game.py builds with CLANG64's clang where the launcher installed it, packs
the RomFS beside the lift and the compile, takes a prebuilt runtime, and compiles the game's resources without cmd.exe,
so a user folder with a space in its name builds.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 03:57:01 -05:00
chrg6
9bb3c6c55a Hand the frame limit to RivaTuner Statistics Server where it runs, and take it back when RTSS does not hold to it.
Where RTSS is installed and running, the frame limit from the menu goes into RTSS's profile for the game's executable
through RTSS's hooks library, loaded at run time, and the game's own pacer stands aside while RTSS has hooked the game.
Menu changes apply live, unlimited clears the limit, and closing the game (or any exit path) puts back what the profile
held, or removes a profile the game created. Each change is read back from the saved profile: without administrator
rights RTSS's profile folder cannot be written, and the game then keeps its own limiter. While RTSS limits, RTSS's own
frame counter for the game is checked against the limit; well past it for three seconds, the game takes the limiting
back for the run. The log says which limiter is in use and why, and a note under the frame-rate row says when RTSS
limits, when its profile is read-only, and when it does not hold the game to the limit. rtss = 0 and frame generation
keep RTSS out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 01:25:12 -05:00
chrg6
8f559ac945 Show the Discord status under an NX2navi application instead of the old one
Discord takes the name above the presence from the application whose id the client sends, and the built-in id
belonged to the application the earlier framework registered for its own game, so the status read as that game.
The id and the art key now live in runtime/discord_app.h (NX2NAVI_DISCORD_APP_ID_DEFAULT and
NX2NAVI_DISCORD_IMAGE_DEFAULT), the one place to paste the NX2navi application's id. Until it is set there or in
nx2navi.ini, the presence stays off and logs once how to set it, and --probe-discord skips. The ini example and the
comments no longer claim the old id is registered as NX2navi, and the details-line example uses game 1.1.1.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 01:25:12 -05:00
chrg6
8702ddb356 Default to the Switch's own button positions on every gamepad, and fix menu edge cases.
pad_layout defaults to nintendo: Switch A on the right face button, B bottom, X top, Y left, on an Xbox pad too, where
auto had picked the Xbox layout. The settings probe checks every button's position.

Menu: the "default" mark follows the Steam Deck profile's values (cfg_default); Left on a value the list does not hold
goes to the last entry; the HDR row says "in use: off" when the swapchain is not HDR10; the open state is read again
after taking the reset, so a menu opened by F1 while the overlay alone was drawn starts with its focus row; the font
atlas is rebuilt only for a scale more than 12% off or one that held for half a second, so dragging the window's edge
no longer rebuilds it every frame.

A shader that fails to translate keeps its request and code in the shader cache. NX2NAVI_GPA_TWIN=0 turns the guest
copy of device address table stores off (diagnosis). The memcpy override no longer prints its first 500 calls.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 00:34:29 -05:00
chrg6
a42648e27a Add the game's native HDR, render at the monitor's real size, and refresh movie frames on the GPU.
HDR is now a menu row: Off, Enhanced (the runtime's own HDR tonemap) or Native. Native reports an HDR10 display to
the game with the settings' peak and paper white; the game then renders its own HDR picture and presents it as PQ in
A2B10G10R10, which goes to the HDR10 swapchain as it is. The peak, game, HUD and (for Enhanced) hue rows follow it.

The build kit's link left out runtime/nx2navi.rc, so the game had no manifest and no icon: without per-monitor DPI
awareness, a 5120x2160 monitor at 150 % gave a 3413x1440 window that Windows stretched. It is compiled with windres
and linked again.

The movie decoder's frames are copied into the game's buffer by the host; the back end is now told of that write, so
the GPU's copy of the buffer does not keep older or empty bytes (green stripes in NV12).

A longjmp out of the game's JPEG decoder now logs the guest functions that called it, to trace a later crash.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 13:31:07 -05:00
chrg6
b9a042969e Keep the HUD out of frame generation, show the frame generation rate, and start DLSS Frame Generation.
Frame generation now gets the picture without the HUD each frame: the upscaler's output before the HUD is drawn over
it, encoded to sRGB as the game's last pass encodes its picture and put through the same colour, scaling and borders
as the presented frame, so it tells the HUD apart and leaves it unwarped in the generated frames
(NX2NAVI_FG_HUDLESS_SHOW=1 shows that picture, a test). The performance overlay gains an FG row and the fps line the
display's rate, generated frames included. The device enables VK_KHR_get_memory_requirements2 whenever AMD's frame
generation is on, which crashed at start with DLSS upscaling.

DLSS Frame Generation through NVIDIA Streamline (vk_dlssg.c, and nx2navi_dlssg.dll from runtime/dlssg, built with
MSVC by tools/build_dlssg.py against the SDK kept outside the repository) creates the instance and device through
Streamline's proxies and calls its swapchain hooks; Streamline still fails in its plugin start-up here, so the menu
lists it only while it is set.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 13:31:07 -05:00
chrg6
7c11ff6816 Add AMD FSR 3.1 frame generation: a generated frame between every two the game draws.
With Frame generation set to AMD FSR 3.1 (after a restart), AMD's frame generation swapchain takes the place of the
present path's own: the device creates two more graphics queues for its presents and image acquires, the present
path acquires, gets images and presents through its replacement functions, and every frame configures generation
and records its preparation from the depth and camera motion vectors the DLSS or FSR 3.1 upscaling pass made (one of
them must be on). Generation pauses while the menu is open. On an RTX 5090 at a 60 fps game, about one frame was
generated for every frame drawn in play.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 13:31:06 -05:00
chrg6
ca5e5eb5a4 Add AMD FSR 3.1 upscaling, and run DLSS's smaller modes on a 16:9 picture too.
The Upscaling choice gains FSR 3.1 Native AA, Quality, Balanced, Performance and Ultra Performance. FSR 3.1 runs
through AMD's signed amd_fidelityfx_vk.dll (loaded at run time; the build kit ships it) in DLSS's place, on the same
scene light, depth and camera motion vectors and at the same render scales. Its Vulkan back end needs
VK_KHR_get_memory_requirements2, which the device now enables when FSR 3.1 is chosen.

A half-size effect pass with three targets and a half-size depth was taken for a G-buffer, which switched every later
frame to the deferred frame shape: there the output pass of a smaller scene was never found, so DLSS Quality,
Balanced, Performance and Ultra Performance did nothing on a 16:9 picture. Such a pass smaller than the scene is now
left alone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 13:31:06 -05:00
chrg6
1d7bc90848 Fix shadows, colour writes and present pacing on drivers that read Vulkan's undefined cases differently.
A depth-compare read through a sampler whose compare is off now gets the slot's comparing sampler, as the Switch
compares there and only NVIDIA's driver did so on its own. Colour components a fragment shader does not write are
masked out, as Maxwell leaves them alone. Without mailbox presentation the swapchain takes relaxed FIFO, or
immediate, so a late frame no longer halves the frame rate. NX2NAVI_VK_NOOPT=1 builds pipelines without the
driver's optimiser, for a driver whose compiler fails on one.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 10:59:59 -05:00
chrg6
edce57ce5d Render DLSS's quality modes at their own scale by fixing the game's dynamic resolution.
The game sizes its scene each frame from a GPU-time controller. The new patch set res_fixed takes the controller's
fixed path and reads the scale from the patch page, so DLSS Quality, Balanced, Performance and Ultra Performance
render at 67, 58, 50 and 33 percent of the picture and DLAA at all of it. The set goes on once the controller has run
for a few frames, and the menu's Upscaling choice lists the modes and switches them live.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 10:59:59 -05:00
chrg6
56a46cadba Draw the picture above 1440p, and fold scaling, FSR 1 and DLSS into one Upscaling choice.
NX2NAVI_GAME_RES (1440, 1800, 2160, 2880 or window, read at start) sets the picture's height; the widescreen patch
sets now also run at 16:9 when the height is not the game's, with the width following the shape and the scene 3/4 of
both as the game draws it. Measured at 2160p with 21:9: a 5120x2160 picture and a 3840x1620 scene at 60 fps.

The Screen tab's Scaling-to-the-window row and the DLSS rows become one Upscaling row (Bilinear, AMD FSR 1, NVIDIA
DLSS) over NX2NAVI_UPSCALER and NX2NAVI_DLAA (option_rows: opt_choice_index and opt_apply for a row over several
settings), with the FSR strength greyed out unless FSR is chosen and a Resolution row beside the widescreen one. DLSS
always uses NVIDIA's model for its scale (no model row). There are no DLSS quality modes: the game sizes its scene
from the picture by its own 3/4 share, and writing a smaller scene into wide_scene's constant left the light target
as it was, so every mode would render the same.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 09:26:51 -05:00
chrg6
020fe0eeb8 Give Ocarina's own frames-per-update the display interval, so its menus and interface keep their speed above 60 fps.
The base-step write fixed gameplay, but the interface and the frame counter step by the time manager's nominal frame, which the framework update (main+0x6e6be0) sets every frame as 60 over a target refresh rate it keeps at 60 (main+0x3b4e300 writes frames per update, its inverse, seconds and the rate). The new patch set ostep (recomp/patches-v111.txt, on by default) makes that update read frames per update from patch page +256, which the runtime writes at each present as the 5-frame average of the display interval in 60 Hz frames. The game then makes the whole nominal frame itself and the base step stays 1.0. At 144 fps the Plus menu opened in 0.17 s against 0.35 s at 60; now in 0.25 s, within the screenshot capture's noise. Builds without the set keep writing the base step. NX2NAVI_SHOT_AFTER delays the first NX2NAVI_SHOT_EVERY shot.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 09:26:51 -05:00
chrg6
897ad1d0ea Step Ocarina's game by the display interval, not one 60 Hz frame per present, so it keeps its speed above 60 fps.
The time manager **[main+0x4c7e890] holds the frame's base step in 60 Hz frames (+0x1c0), from which each time category's {frames, 1/frames, seconds, 1/seconds} is made (main+0x2c84c). The game leaves it at 1.0 whatever the frame rate, so at 144 fps it ran 2.4 times too fast. Each present now writes the 5-frame average of the display interval there (1/1000 to 1/15 s); the game never writes it itself. Scripted input follows that game clock. NX2NAVI_OCARINA_STEP=0 leaves the step alone; NX2NAVI_TRACE=perf reports game seconds against wall seconds. NX2NAVI_VI_HZ and NX2NAVI_VI_VRR set the refresh rate and VRR support vi reports (60 and off as before), for diagnosis.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 09:26:51 -05:00
chrg6
df2fbe4640 Play the game's own interface sounds in the settings menu.
Opening and closing the menu, moving the cursor, changing a value, pressing an item, cancelling a dialog and changing tabs play the game's system sounds (Plus menu open and close, cursor, decide, cancel, tab move), read from the user's RomFS at the first use and decoded from BWAV (DSP-ADPCM or PCM16, 48 kHz) in runtime/menu_sound.c. They are mixed over the game's output in the audio callback with up to eight voices started without locks. The Sound tab gets a Menu sounds volume (menu_sound_volume, 0 to 100, default 80, under the output volume). A RomFS without the files stays silent.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
fa6f9717fb Reach buffers through a device address table where the translator finds no storage buffer, and lower MATCH.ALL and ATOMS.POPC.INC.
Kokiri Forest drew black, in tiles and in shadowed and indoor areas, where shaders read light, probe and instance data through pointers they load from other buffers at an index (a phi of a pushed pointer and a loaded one, a pointer spilled to local memory): those reads returned 0. Translator patch 0030 keeps such accesses global, with a new first source naming the table, and the SPIR-V back end looks the address's 4 KiB page up in it and loads through the buffer device address it gives (PhysicalStorageBuffer64). runtime/vk_gpa.c keeps the table: two levels over the 40-bit GPU address space, page entries naming immutable records, records reused only after the GPU finished with them. Imported pools, their VRAM mirrors and the pages of virtual pools go in it; pools in it are destroyed after the submissions that may still read them. The last failing compute program needed MATCH.ALL (subgroupAllEqual) and the aggregated shared increment ATOMS.POPC.INC, now lowered in AmpereLowering.cs; Kokiri Forest translates without a failure.

NX2NAVI_GPA=0 turns the table off and NX2NAVI_GPA_EMPTY=1 keeps it empty. A first try synced every VRAM mirror at each table reader's draw, which overwrote what the GPU had written into them and made the black worse; mirrors sync only when bound.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
91c147a0aa Draw Ocarina in the window's shape: a wider picture and camera, with the HUD, menus and movies kept 16:9 in the middle.
The patch sets of recomp/patches-v111.txt read the game's 2560x1440 picture and 1920x1080 scene sizes from the patch page, give every 16:9 camera the picture's ratio, squeeze the UI's full-screen projection into the middle 16:9 (fades and the menu backgrounds that redraw a capture stay full width) and pillarbox movies. runtime/widescreen.c sets them up from the new Screen tab row Widescreen (NX2NAVI_GAME_ASPECT: 16:9, window, 21:9 or 32:9, at the next start).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
18b9ef3cd0 Log who sizes 16:9 textures with NX2NAVI_LOG_RT_SIZES.
A diagnosis for native ultrawide: each nvnTextureBuilderSetSize2D of a 16:9 size of at least 320 wide logs its
caller and the caller's caller (up to 200 lines).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
4943b50ff2 Unlock the frame rate, shorten cold starts, and describe the Ocarina build in the docs.
Ocarina steps its game by the clock (the same frame-numbered walk covers half the distance at 120 fps), so in a build
without the fps60 and realtime patch sets the pacer holds frames to the frame limit alone: any rate from 30 to 1000,
the monitor's rate, or unlimited (164 fps average in Kokiri Forest). The menu always shows the row, with 165, 240 and
Unlimited added. NX2NAVI_PACE_HZ sets the pacer's rate for tests.

A compute pipeline is compiled outside the pipeline lock, and one compile serves the replay and the boot prebuild
alike; the prebuild uses half the CPUs. The guest waits at most NX2NAVI_PREWARM_WAIT_MS (3000) for the boot prewarm,
which then goes on in the background (a cold start waited 9.8 s). NX2NAVI_TEST_PAD_AT attaches the test gamepad late
and presses it, to test a controller switched on in play.

README, docs/architecture.md, docs/controls.md and AGENTS.md describe the Ocarina build.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
eed3e6b786 Decode the upscaler stand-in's picture with a square, emit SURED with its real opcode and keep the translator's warnings.
The post pass stores the square root of each channel, so the stand-in for Ocarina's untranslatable upscaler now
filters those values and squares them in its compute pass (shaders/fallback_tonemap.spvasm, vk_tonemap.c) instead of
decoding them with the sRGB curve, which darkened mid-tones and lifted the darkest values; the pass is compiled in again,
its round-24 device loss having been the push descriptor call outside the recorder. NX2NAVI_FALLBACK_EXPOSURE is gone.
AmpereLowering emitted SURED as 0xeb48, which matches no Maxwell instruction, so the translator skipped every image
reduction; with 0xeb58 the edge AA's blend-weight pass writes its image. The translator's own warnings go to res.json
notes, and shader dumps are named by program serial so they match the frame dumps' program numbers.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
9a5b1163f3 Make every settings menu row work for Ocarina and give the controls Ocarina's actions and keys.
The Screen tab hides Game resolution when the build has no output and scene patch sets, and the resolution code no
longer grows the memory pool for it. FSR sharpness now also runs when the game image is shrunk to the window, which is
always the case for Ocarina's 2560x1440 picture at 1920x1080, and the overlay drops NX2navi's fixed 3D scene size. A colour
profile set in nx2navi.ini now applies without the menu. The Game tab hides the frame limit in builds without frame-rate
patch sets and lists the game languages the RomFS ships, adding Polish and Brazilian Portuguese. 5.1 sound is reported to
the game's virtual output device. The remap page describes each button as Ocarina's controls screen does, gives each
D-pad direction its own description and drops NX2navi's shake row; the keyboard defaults follow Ocarina (Shift dashes on A,
Ctrl puts away on B, O and N for the ocarina and Navi, middle mouse resets the camera). docs/controls.md is updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
618b9ba4e5 Fix Ocarina's white dialogue frames, the fountain floor speckle and the button prompt text
The texture pool descriptors are now a ring of sets, one per submission, brought up to date from a change log, and the first submission of each frame waits for its GPU work before the game goes on: the GPU ran late and part of a frame read data of the next one, and distant characters drew NaN that bloom spread over the frame. The window acquire also waits for the image's previous frame. Function locals start at zero unless DLAA is on, which removes the per-warp light tiles on the Great Fairy Fountain floor and Link's dark, speckled look. Texture slots follow only live entries of their own target, so the volumetric fog gets its 3D volume. The pool refresh walks only the slots that changed.

The translator implements PRMT (patch 0021), which it only logged before; the button prompts render again. HFMA2.RELU no longer depends on it, HMMA.F16 rounds once and HMMA.F32 is lowered, checked against GPU vectors with a new Maxwell warp emulator.

The frame dump gains a re-arming white-frame trigger, a trigger on a depth target's first pass, NaN pixels in magenta, image handles and view targets, and depth copies of sampled depth textures.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
c8738a948c Name the settings, files and tools NX2navi
The names are NX2NAVI, NX2navi or nx2navi: the settings prefix (NX2NAVI_*), the ini file
(nx2navi.ini), the shader translator (nx2navi_xlate), the Windows resources, the installer and the docs. The 8-byte
file magics keep their size (NX2NSANS, NX2NSPRG, NX2NSPRP, NX2NPKEY, NX2NRFS1), so caches and the RomFS index from
older builds are not read. cfg.c and the settings pages took the prefix length as 5; it now follows the prefix.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
77d0c0b84e Port Ocarina of Time (Switch 2) to the recomp host
The NVN2 front end and the SM86 to Maxwell shader lowering (tools/xlate/AmpereLowering.cs, mesh and task stages,
bindless texture pools, BRX jump tables, the NVN2 compute c0 layout) with four translator patches (0017-0020) bring the
opening of the game to 58-60 fps on the Vulkan renderer.

This round fixes the haze: SM86 IPA is lowered as a plain Maxwell IPA.PASS (texture coordinates were corrected for
perspective twice); LDSM, TXD, both F2IP byte forms, HMMA, MOVM and HFMA2.RELU are lowered and spill mode has eight
uniform register groups; conditional rendering keeps the newest counter report per address and treats a report as
pending until its value is in guest memory, so occlusion tests and the depth clears around the depth copy behave; and
the upscaler stand-in decodes the post pass's sRGB picture before writing the linear target. Tensor-core programs keep
the stand-in unless NX2NAVI_NATIVE_TENSOR=1, because their lowering does not match the hardware yet.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
Valiantsin Dzerakh
0478c13e45 Import the base tree (MIT, see LICENSE) 2026-11-07 05:04:38 -05:00