With DLSS-G, Reflex's sleep held each frame's start with no limit while the game's pacer still held the limit on the
present thread and at the window image's acquire (A-16, P-16): the pacer's wait came after the picture was drawn, so
the pad was read up to a period before the picture left, on top of Reflex's own wait for the GPU.
vk_dlssg.c vk_dlssg_pace, on the presenting guest thread in nvnQueuePresentTexture, asks dlssg_pace.h which limit Reflex
should hold and stores it; vk_dlssg_frame on the present thread hands a changed limit to Streamline before its present
(reflex_apply, under the present lock, which keeps Streamline's options calls on one thread at a time), as does each
new swapchain, which has neither mode nor limit. GfxBackend.frame_paced now returns the period the pacer still holds:
vk_backend.c vk_be_frame_paced gives the game's ceiling (frame_step_ceiling_ns, 240) while Reflex holds the limit,
0 where a driver's low latency holds it (vk_lowlat_pace, unchanged), else the period; during a movie the back ends get
0 and the pacer keeps the movie's period and catch-up slots as before. The pacer takes the limit back before the first
host present, after 200 ms without one, with a DLL older than nx2sl_reflex2 (one log line at start), for a limit
Streamline refused, and for the run when the frames show Reflex does not hold it; the "frame rate:" lines name who
holds it, the "dlssg: present N" line counts the frame starts Reflex held, and Reflex's sleep now counts as pacing
(perf_end_any, on whichever thread acquires). No wait is added on a drawing thread: the limiter's wait moves from the
acquire's sleep_until and the present thread's slot to Reflex's sleep a few lines later in the same acquire, and the
present thread's options call returns at once. docs/architecture.md names Reflex as a limiter. Not reproduced before
the change (no RTX 40 or 50 here); vk_dlssg.c, vk_backend.c and nvn_api_obj.c compile clean with the dev build's
flags, and dlssg_pace_check, fg_reset_check and frame_step_check pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With frame generation running and no DLSS or FSR upscaling, vk_dlaa.c arms and ends the frame in the same places and,
where the upscaler's evaluation would run, makes only frame generation's inputs (fg_only_frame): the scene's depth and
camera found as before, motion vectors from the same pass at the scene's size, no jitter at all, and the picture without
the HUD copied from the game's own scaled picture. DLSS Frame Generation and AMD's frame generation no longer need an
upscaler set; NVIDIA's through NGX still needs DLSS at the start and then keeps running when the upscaler is switched
off. The menu's Frame generation row stays usable with every Upscaling choice and the Upscaling row keeps frame
generation as set, with texts in all four menu languages. The log says at the start and at each change whether frame
generation takes its inputs from the upscaler or runs without one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
When Streamline loaded but DLSS Frame Generation was not available, the menu's row read "in use: off, needs an RTX 40 GPU or newer", also on an RTX 5080: the same check fails when the plugin did not load or a function it needs is missing. The row now points to the dlssg lines of the log, where the bridge says whether the plugin loaded and which of its functions it found, and then asks Streamline for its support result on the selected Vulkan device and logs it by name. The query is an optional export, so a bridge DLL of an earlier build keeps working.
The runtime and the bridge (tools/build_dlssg.py, MSVC, Streamline's headers) both build here. The failing case itself was not reproduced: on this RTX 5090 frame generation is available.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
framegen_multiplier (2, 3 or 4, live) sets how many frames the display gets per rendered frame while NVIDIA DLSS frame generation runs, and a DLSS multiplier row under Frame generation in the Screen tab sets it. nx2navi_dlssg.dll now passes that count to Streamline and reports the GPU's limit (numFramesToGenerateMax) through a new optional export, nx2sl_frames_max; with an older DLL the game keeps to 2x. A value above the limit is clamped to it with a log line, and the menu lists only what the GPU and driver allow, with a note saying why the rest are missing. The Frame generation row now says "in use: off" and why when DLSS frame generation was set but does not run.
The pacer divides the frame limit by the multiplier in effect, as it already halved it for FSR 3.1, so the display gets the limit and VSync at the display's rate drops no generated frames; RivaTuner Statistics Server stays out while DLSS frame generation runs, since it counts generated frames. With DLSS 2x a limit of 60 now shows 60 on screen instead of 120.
nx2navi_dlssg.dll has to be rebuilt (tools/build_dlssg.py) for 3x and 4x.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.
Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Reflex's markers sat at the host present with frame numbers unlike the frame's tags, slReflexSleep was never called, and the low-latency mode was set before any swapchain existed, so it never applied. GfxBackend.frame_start, called from nvnWindowAcquireTexture, now sets the simulation and submit-start markers after Reflex's sleep (skipped once nothing was presented for 200 ms); submit end is set when the frame's submissions went out; the mode is set again after each swapchain (NX2NAVI_REFLEX: 1 on, 0 off, 2 boost); frames are numbered by the game's presents; and the fps counter counts what was shown. NX2SL_VERSION is 3, so nx2navi_dlssg.dll must be rebuilt. From a tester's fixes: 42-45 fps game, 84-90 on screen (was 24).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Crashes: the render-target heap (HeapDef DynamicTextureAllocatorMem and its parent) grows with the widescreen
picture, so the pause menu no longer reads a null block at 5120x2160; texture uploads keep the game's memory mapped
while they copy it, so UnmapPhysicalMemory no longer pulls it away mid-copy; DLSS Frame Generation no longer crashes
in Streamline's set-up (physical devices and the window surface go through its proxies, its swapchain images are
counted first, resources are tagged per frame); a stale core-wait target is cleared before its thread is freed.
Freezes and races: a resize during a swapchain rebuild is kept, a failed frame generation swapchain is retried
instead of replaced by a plain one, three acquire timeouts in a row rebuild the swapchain, device waits take the
queue lock, a translator child that stops answering times out, an in-flight compute pipeline builds at normal
priority, a save Commit started before the window closes finishes and none starts after, a settings change just
before closing is saved, and a movie sample taken before a flush is dropped.
HDR: Enhanced HDR extends the game's own tonemap so highlights go above the picture's white (the hue slider,
which no longer applies, is gone from the menu); frame generation gets a HUD-less picture, the HDR flag and the HDR10
metadata under HDR too.
Memory: ASTC textures are encoded to BC3 unless the PC has 20 GiB of VRAM and 48 GiB of RAM, as Windows charges video
memory to the commit charge (a long session held 17 GiB of RGBA8 textures and 45.7 GiB of commit on a 32 GiB PC).
Shaders: the translator lowers spill-mode programs with more than eight uniform register groups in a wider spill
layout, and local loads and stores with a uniform-register address (36029 of the game's 36031 variants translate,
20 failed before).
The launcher release ships the shader tools and AMD's FidelityFX library (make_launcher.py --ffx); windres there gets
the toolchain on PATH.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Frame generation now gets the picture without the HUD each frame: the upscaler's output before the HUD is drawn over
it, encoded to sRGB as the game's last pass encodes its picture and put through the same colour, scaling and borders
as the presented frame, so it tells the HUD apart and leaves it unwarped in the generated frames
(NX2NAVI_FG_HUDLESS_SHOW=1 shows that picture, a test). The performance overlay gains an FG row and the fps line the
display's rate, generated frames included. The device enables VK_KHR_get_memory_requirements2 whenever AMD's frame
generation is on, which crashed at start with DLSS upscaling.
DLSS Frame Generation through NVIDIA Streamline (vk_dlssg.c, and nx2navi_dlssg.dll from runtime/dlssg, built with
MSVC by tools/build_dlssg.py against the SDK kept outside the repository) creates the instance and device through
Streamline's proxies and calls its swapchain hooks; Streamline still fails in its plugin start-up here, so the menu
lists it only while it is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>