Commit Graph

14 Commits

Author SHA1 Message Date
chrg6
f97358ddc4 Give the recording thread a fast core and its sibling on Linux, and pick the thread that does the recording.
On Linux recorder_core reserved the last logical processor of the mask (an efficiency core on a hybrid
CPU) without its sibling, for the first thread to call vk_exec_record, and the first process-wide affinity
call took it back. plat_cpu_reserve there now takes the fast core that clocks highest with both of its
logical processors (none when fewer than four cores are fast), threads the holder starts get the other
processors, plat_process_affinity leaves the core with its holder, and a sweep every 300 presents moves
threads that inherited the core and gives it back once the holder has ended.

Shared code, so Windows changes too: the priority and the core go to the first thread that has spent half
a second in vk_exec_record (vk_exec.c rec_claim) instead of the first to call it, and the log names the
logical processors.

Pull request #358 by mooki000, taken as it is. The Windows files compile; nothing was run, and the Linux
code is not compiled here.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-10 06:20:40 -05:00
ordinarybob
662a6e88ee Run the game on the die with the larger L3 cache on processors whose dies differ (AMD's two-die X3D processors).
Windows places a game on the V-Cache die only when it recognizes the exe as a game, and it does not know this one, so the threads were spread over both dies by frequency preference. cache_die = 1 (the default) narrows the process to the logical processors that share the largest L3; it never widens the set the process was given, and does nothing where every L3 has the same size. The recorder's reserved core is then chosen inside that set.

Co-Authored-By: Claude Fable 5.2 <[EMAIL]>
2026-11-10 02:01:35 -05:00
chrg6
87f51f94a9 Read shaders from the disk cache off the render thread past a small budget, and pack the cache on carried updates.
A profiled traversal session had 9 of its 16 worst hitches (100 to 500 ms) inside the render thread's shader lookup,
reading <key>.res.json and <key>.spv of shaders met for the first time: opening a loose file costs about 3 ms the first
time on Windows. get_async_one now reads in place while those reads stay within 1/8 of the wall time (2 ms at once);
past that three loader threads read them and the draws wait as for a translation. The perf line counts both.

The launcher's updates carry the shaders over and never packed the cache, which held 44,000 loose translations in the
test install. An update now packs it once it holds 1,000 loose ones, and the pack tool reads the loose files on 16
threads.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 14:34:45 -05:00
chrg6
137e03feae Say which guest region holds the memory when the process grows.
The commit census of NX2NAVI_TRACE=perf with NX2NAVI_MEM_CENSUS=1 reported the process's committed memory by kind,
which lumps every guest region together. memory.c mem_guest_census now walks each reserved region (aslr, stack, heap,
alias, kernel, host functions) beside it and reports the bytes committed in each, so a process that has grown to thirty
gigabytes (issues #203, #215, #240) says which region to look at. Like the census, it runs only when mem_census asks
for it, since the walk holds the address-space lock the game's threads take at every page fault.

On the Kokiri route the answer was the aslr region at 28 to 31 GB, the heap at 7.5 GB and the alias window at 2.7 GB
while the physical-memory pool itself stayed near its limit, which is what the device-loss crash follows.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 07:52:06 -05:00
chrg6
7db0c5c75b Keep the crash report's exception filter in place, and write the game's exit code into its log from the launcher.
The last-chance exception filter is set at the start, before the GPU driver and the other DLLs load. A DLL that sets
its own filter later takes its place, and a fault in that DLL then ends the game with no FATAL line in the log. Two
0.6.0 logs from an RX 7800 XT end that way on the title screen. Once a second the filter is now put back and the
module that replaced it is logged (NX2NAVI_CRASH_FILTER_GUARD, default 1). When the game ends with a nonzero code,
the launcher adds that code, in hex with its meaning, to the end of logs\nx2navi.log, so a fail-fast exit that no
handler in the process can see still shows in the log a player sends.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 11:22:37 -05:00
chrg6
dfc5b90b59 Fix what the 0.6.0 review found, and ship DLSS Frame Generation in the launcher release.
The commit census of the perf trace walked the address space on the presenting thread outside mem_census, which
brought back the hitch mem_census was added to remove; it now runs only with mem_census = 1. DLSS's output pass at
the mode's share fell back to no pass at all when the scene was not at that share (the first presents, a dynamic
resolution step): after such a frame the first pass wider than the scene is taken again for 120 frames. The launcher's
nx2navi.ini editor no longer rewrites a file it cannot read, keeps the byte order mark and bytes that are not UTF-8,
reads an empty line as the game does, and leaves no temporary file behind. The build kit carries the two modules
build_game.py imports on Linux, the Linux steps list the right packages and Python, and stale comments and notes are
corrected (Discord on by default, two prebuild threads, Enhanced HDR gone).

DLSS Frame Generation needs nx2navi_dlssg.dll, NVIDIA Streamline's runtime and nvngx_dlssg.dll beside the game, which
no release carried, so the menu offered it and the game turned it off. tools/make_launcher.py --dlssg and --streamline
put them with their licences and a notice in the release's bin/dlssg/, and tools/make_game.py place_dlssg copies the
whole set beside the game. THIRD_PARTY_NOTICES.md has the row; the notes and README say RTX 40 and 50.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 09:10:36 -05:00
Tyler
3e10da4d5c Log where the process's committed memory lies with NX2NAVI_TRACE=perf
Every 3600 frames and whenever private commit grew by 1 GiB since the last census: guest, other private, mapped and image
memory, and the largest private allocations outside the guest's range.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01HtayeqEG2x5woYzWuEQBGV
2026-11-09 08:20:01 -05:00
tangerineturtle1
480a197994 Add replay diagnostics that found this session's frame-time dips, all off by default.
lock_time (NX2NAVI_LOCK_TIME) makes the replay threads time each lock they have to wait for, kept per asking site (platform.h plat_lock_timing, plat_mutex_lock_at and plat_rmutex_lock_at carry the site), and the frame-time summary lists the sites with the most wait, the recorder's full-ring and drain waits, and the texture lock's holds over 1 ms with the code that took it. replay_time now also keeps each frame's replay ops: a frame over 25 ms charged to the replay says how many draws, binds and transfers it replayed, their time, its slowest op, and how much of the replay's wall time the thread was on the CPU. NX2NAVI_PROFILE_REPLAY=1 samples only the replay thread without call chains, and the profiler now follows the thread that replays instead of the one that started the back end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
tangerineturtle1
a154bafad2 Add a per-frame texture work log line and two ASTC upload changes, all off by default.
texup_log_ms logs a "texup:" line for each frame whose texture work on the render or replay thread
reaches that many milliseconds. The line splits the time into texture creation, staging, storage
copies, ASTC recording, scratch buffers and new device memory, to show where an area load's hitch goes.

astc_scratch_keep keeps the ASTC decoder's scratch buffer across upload batches instead of making a
new 64 MiB buffer for each batch. astc_arena stages GPU-decoded ASTC blocks in the staging arena
instead of a buffer per texture. Both aim at the allocation churn seen during area loads and stay off
until a play test measures them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
b0d420db3d Land the shader and pipeline stutter pass, and the fixes it needed.
Large compute shaders that no cache holds are built on one background thread after the boot prebuild, smallest first, so their first dispatch no longer compiles them on the replay thread. NX2NAVI_BIG_BUILD_MAX_MB stops that builder once the process has grown by that much: on a 31 GB machine one of these shaders took the process up by 12.8 GB and the game stuttered while Windows paged. The builder takes the queue under its lock and copies each entry out before compiling it, so a shader queued meanwhile cannot free the arrays under it. The same change reports what pipeline-cache.bin gives back, and starts over when the file grows past NX2NAVI_PIPELINE_CACHE_MAX_MB.

A tensor-core program is now tested before its shader is asked for, in both dispatch paths. It runs the stand-in while NX2NAVI_NATIVE_TENSOR is off, and translating it anyway recorded four AI-upscaler shaders of 0.87 to 4.4 million SPIR-V words that this game never dispatches natively. Process memory went from 29.3 GB to 24 GB and the multi-gigabyte builds during play are gone.

The frame-time summary says which part a slow frame went to, and with NX2NAVI_REPLAY_TIME how the replay splits between draws, binds and transfers; NX2NAVI_SVC_SLOW_MS logs the kernel services that block, with the thread they blocked on. prof_report.py reads the map this build writes and adds the image base to a runtime Rip, so a profile resolves to function names instead of question marks.

build_xlate.py applies the patches with GIT_CEILING_DIRECTORIES set to the build folder's parent. Inside a checkout git read 0021-prmt-byte-permute.patch's paths from the repository's top, skipped every file of it and still exited 0, so PRMT was missing from locally built translators and every byte permute was a no-op. A Skipped patch line now fails the build. The note in AmpereLowering.cs that said the translator emits nothing for PRMT is corrected.
2026-11-09 03:34:46 -05:00
chrg6
1f7e9c975b Speed up the replay and fix what the perf pass found, and add a frame capture key for chasing rendering faults.
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.

Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
8c4c2f809c Count the GPU time of copies into VRAM mirrors, so GPU-bound frames are no longer reported as CPU-bound.
A mirror prologue is closed after the part it was made for but runs first on the GPU; its timestamps were read in the wrong order, so its copies counted as idle time with work queued. ts_submitted now queues the reads in GPU order, and the perf line shows the copies on their own. From a tester's fixes: in Kokiri Forest at 4K on PCIe 3.0, 7.1 of 20.4 ms.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
1b39aabd37 Describe what the code does in comments and docs.
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
Valiantsin Dzerakh
0478c13e45 Import the base tree (MIT, see LICENSE) 2026-11-07 05:04:38 -05:00