Commit Graph

20 Commits

Author SHA1 Message Date
chrg6
cb234fade1 With frame generation and no frame limit chosen, limit to the display's refresh rate.
Since the pacer divides the limit by frame generation's factor, the default limit of 60 held the game to 30, 20 or 15 rendered frames a second at 2x, 3x or 4x on any monitor, 15 at DLSS 4x on a 165 Hz one. While AMD's or NVIDIA's frame generation swapchain is in use and neither fps_limit nor the older fps60 = 0 is set, the limit is now the monitor's rate, as with fps_limit = display: 4x on 165 Hz draws about 41 and shows 165. A limit the player set is kept, and the menu's Frame rate limit row shows the display choice while this applies.

The mouse camera divided its input by the limit's frame ratio, which counts generated frames, so frame generation turned it faster by its factor; it now uses the rate the game draws at (frame_step_game_hz).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 12:18:17 -05:00
chrg6
137e03feae Say which guest region holds the memory when the process grows.
The commit census of NX2NAVI_TRACE=perf with NX2NAVI_MEM_CENSUS=1 reported the process's committed memory by kind,
which lumps every guest region together. memory.c mem_guest_census now walks each reserved region (aslr, stack, heap,
alias, kernel, host functions) beside it and reports the bytes committed in each, so a process that has grown to thirty
gigabytes (issues #203, #215, #240) says which region to look at. Like the census, it runs only when mem_census asks
for it, since the walk holds the address-space lock the game's threads take at every page fault.

On the Kokiri route the answer was the aslr region at 28 to 31 GB, the heap at 7.5 GB and the alias window at 2.7 GB
while the physical-memory pool itself stayed near its limit, which is what the device-loss crash follows.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 07:52:06 -05:00
chrg6
66927b8f94 Ask every driver but NVIDIA's to keep NaN and infinity in the game's shaders, which should bring Navi's orb back on AMD GPUs.
The game's shaders rely on IEEE NaN and infinity results: unordered comparisons compile to x > c || isnan(x), a
zero-length normalisation gives an infinity that a later test catches, integer masks travel through float selects,
and the translator's own NaN guards are isnan tests. Our SPIR-V never declared SignedZeroInfNanPreserve, which lets a
driver assume floats are never NaN or infinite. NVIDIA's driver keeps the IEEE results anyway; AMD's compilers do not
(issue #156: a NaN-bit select read as a signed integer gave 2^32; #41 and #110: black and white blocks on Navi and on
Link next to her). The player report: AMD GPUs draw Navi's sparkles but not her orb, whose light sits at her own
centre.

vk_pipeline.c spirv_nan_preserve now adds the capability, SPV_KHR_float_controls and the mode for 32-bit floats (16
and 64 where the module declares them and the driver can) to every game shader module. NX2NAVI_VK_NAN_PRESERVE: unset
on every driver except NVIDIA's own, 1 everywhere, 0 off. --selftest checks the rewrite; the rewritten modules of 600
translated game shaders pass spirv-val for Vulkan 1.3. Not yet seen on an AMD GPU.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 11:17:08 -05:00
Thiago Cabral
d0c8588e3f Open the game window on a chosen monitor: the monitor setting and --monitor pick it by index, primary, or part of its device or monitor name, and --list-monitors prints the monitors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:18:08 -05:00
Thiago Cabral
bb0ac8caeb Play the sound on a chosen output device: the audio_device setting and --audio-device pick it by index or part of its name, --list-audio-devices prints the devices, and a chosen device that goes away hands the output to the default one.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:17:35 -05:00
tangerineturtle1
480a197994 Add replay diagnostics that found this session's frame-time dips, all off by default.
lock_time (NX2NAVI_LOCK_TIME) makes the replay threads time each lock they have to wait for, kept per asking site (platform.h plat_lock_timing, plat_mutex_lock_at and plat_rmutex_lock_at carry the site), and the frame-time summary lists the sites with the most wait, the recorder's full-ring and drain waits, and the texture lock's holds over 1 ms with the code that took it. replay_time now also keeps each frame's replay ops: a frame over 25 ms charged to the replay says how many draws, binds and transfers it replayed, their time, its slowest op, and how much of the replay's wall time the thread was on the CPU. NX2NAVI_PROFILE_REPLAY=1 samples only the replay thread without call chains, and the profiler now follows the thread that replays instead of the one that started the back end.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 08:09:26 -05:00
chrg6
b0d420db3d Land the shader and pipeline stutter pass, and the fixes it needed.
Large compute shaders that no cache holds are built on one background thread after the boot prebuild, smallest first, so their first dispatch no longer compiles them on the replay thread. NX2NAVI_BIG_BUILD_MAX_MB stops that builder once the process has grown by that much: on a 31 GB machine one of these shaders took the process up by 12.8 GB and the game stuttered while Windows paged. The builder takes the queue under its lock and copies each entry out before compiling it, so a shader queued meanwhile cannot free the arrays under it. The same change reports what pipeline-cache.bin gives back, and starts over when the file grows past NX2NAVI_PIPELINE_CACHE_MAX_MB.

A tensor-core program is now tested before its shader is asked for, in both dispatch paths. It runs the stand-in while NX2NAVI_NATIVE_TENSOR is off, and translating it anyway recorded four AI-upscaler shaders of 0.87 to 4.4 million SPIR-V words that this game never dispatches natively. Process memory went from 29.3 GB to 24 GB and the multi-gigabyte builds during play are gone.

The frame-time summary says which part a slow frame went to, and with NX2NAVI_REPLAY_TIME how the replay splits between draws, binds and transfers; NX2NAVI_SVC_SLOW_MS logs the kernel services that block, with the thread they blocked on. prof_report.py reads the map this build writes and adds the image base to a runtime Rip, so a profile resolves to function names instead of question marks.

build_xlate.py applies the patches with GIT_CEILING_DIRECTORIES set to the build folder's parent. Inside a checkout git read 0021-prmt-byte-permute.patch's paths from the repository's top, skipped every file of it and still exited 0, so PRMT was missing from locally built translators and every byte permute was a no-op. A Skipped patch line now fails the build. The note in AmpereLowering.cs that said the translator emits nothing for PRMT is corrected.
2026-11-09 03:34:46 -05:00
chrg6
1f7e9c975b Speed up the replay and fix what the perf pass found, and add a frame capture key for chasing rendering faults.
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.

Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-09 03:34:46 -05:00
chrg6
8c4c2f809c Count the GPU time of copies into VRAM mirrors, so GPU-bound frames are no longer reported as CPU-bound.
A mirror prologue is closed after the part it was made for but runs first on the GPU; its timestamps were read in the wrong order, so its copies counted as idle time with work queued. ts_submitted now queues the reads in GPU order, and the perf line shows the copies on their own. From a tester's fixes: in Kokiri Forest at 4K on PCIe 3.0, 7.1 of 20.4 ms.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
95ab18fba2 Hold the game at 60 fps while a movie plays, so the intro's narration no longer doubles and the dream shows at high refresh rates.
The game's event script times the intro movie's narration and fades by counting updates as 60 Hz frames. At 144 fps everything ran 2.4 times early: each line started over the one before, and the closing fade hid the dream. frame_step_cap_ns caps the rate at the movie's 60 fps from the decoder's start to its end of stream (ov_movie_live); with fps_limit = unlimited the cap is the movie's rate. With RTSS limiting, the game's own limiter holds a new rate until RTSS has applied it. NX2NAVI_MOVIE_FPS sets the cap, 0 turns it off. From a tester's fixes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 15:51:48 -05:00
chrg6
5aa3bc4119 Render widescreen pictures at the DLSS mode's real share, and size frame generation for the scene it is given.
The game sizes its scene from the scale at the patch page against its own 1440-line picture, so on a 2160-line
picture native DLAA rendered a 1440-line scene and Quality 44 %. The page now gets the share times the picture's
height over 1440, and DLAA is native at any picture size. Switching dlaa off in the menu also gives the scene back
the game's own scale instead of leaving it small with nothing to enlarge it.

FSR 3.1 frame generation was created with the window as its largest render size, but it is given the scene's depth
and motion vectors, up to the picture's size. A 3414x1440 or 5120x2160 scene in a 1920x1080 window wrote past its
resources: a crash in amd_fidelityfx_vk.dll, device faults, striped frames. The context is now made for the picture's
size once.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 04:10:35 -05:00
chrg6
9bb3c6c55a Hand the frame limit to RivaTuner Statistics Server where it runs, and take it back when RTSS does not hold to it.
Where RTSS is installed and running, the frame limit from the menu goes into RTSS's profile for the game's executable
through RTSS's hooks library, loaded at run time, and the game's own pacer stands aside while RTSS has hooked the game.
Menu changes apply live, unlimited clears the limit, and closing the game (or any exit path) puts back what the profile
held, or removes a profile the game created. Each change is read back from the saved profile: without administrator
rights RTSS's profile folder cannot be written, and the game then keeps its own limiter. While RTSS limits, RTSS's own
frame counter for the game is checked against the limit; well past it for three seconds, the game takes the limiting
back for the run. The log says which limiter is in use and why, and a note under the frame-rate row says when RTSS
limits, when its profile is read-only, and when it does not hold the game to the limit. rtss = 0 and frame generation
keep RTSS out.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-08 01:25:12 -05:00
chrg6
501d5bd084 Release pass: fix crashes, freezes and races, cut VRAM use, and translate more shaders.
Crashes: the render-target heap (HeapDef DynamicTextureAllocatorMem and its parent) grows with the widescreen
picture, so the pause menu no longer reads a null block at 5120x2160; texture uploads keep the game's memory mapped
while they copy it, so UnmapPhysicalMemory no longer pulls it away mid-copy; DLSS Frame Generation no longer crashes
in Streamline's set-up (physical devices and the window surface go through its proxies, its swapchain images are
counted first, resources are tagged per frame); a stale core-wait target is cleared before its thread is freed.

Freezes and races: a resize during a swapchain rebuild is kept, a failed frame generation swapchain is retried
instead of replaced by a plain one, three acquire timeouts in a row rebuild the swapchain, device waits take the
queue lock, a translator child that stops answering times out, an in-flight compute pipeline builds at normal
priority, a save Commit started before the window closes finishes and none starts after, a settings change just
before closing is saved, and a movie sample taken before a flush is dropped.

HDR: Enhanced HDR extends the game's own tonemap so highlights go above the picture's white (the hue slider,
which no longer applies, is gone from the menu); frame generation gets a HUD-less picture, the HDR flag and the HDR10
metadata under HDR too.

Memory: ASTC textures are encoded to BC3 unless the PC has 20 GiB of VRAM and 48 GiB of RAM, as Windows charges video
memory to the commit charge (a long session held 17 GiB of RGBA8 textures and 45.7 GiB of commit on a 32 GiB PC).

Shaders: the translator lowers spill-mode programs with more than eight uniform register groups in a wider spill
layout, and local loads and stores with a uniform-register address (36029 of the game's 36031 variants translate,
20 failed before).

The launcher release ships the shader tools and AMD's FidelityFX library (make_launcher.py --ffx); windres there gets
the toolchain on PATH.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 16:02:30 -05:00
chrg6
edce57ce5d Render DLSS's quality modes at their own scale by fixing the game's dynamic resolution.
The game sizes its scene each frame from a GPU-time controller. The new patch set res_fixed takes the controller's
fixed path and reads the scale from the patch page, so DLSS Quality, Balanced, Performance and Ultra Performance
render at 67, 58, 50 and 33 percent of the picture and DLAA at all of it. The set goes on once the controller has run
for a few frames, and the menu's Upscaling choice lists the modes and switches them live.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 10:59:59 -05:00
chrg6
1b39aabd37 Describe what the code does in comments and docs.
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:40 -05:00
chrg6
91c147a0aa Draw Ocarina in the window's shape: a wider picture and camera, with the HUD, menus and movies kept 16:9 in the middle.
The patch sets of recomp/patches-v111.txt read the game's 2560x1440 picture and 1920x1080 scene sizes from the patch page, give every 16:9 camera the picture's ratio, squeeze the UI's full-screen projection into the middle 16:9 (fades and the menu backgrounds that redraw a capture stay full width) and pillarbox movies. runtime/widescreen.c sets them up from the new Screen tab row Widescreen (NX2NAVI_GAME_ASPECT: 16:9, window, 21:9 or 32:9, at the next start).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
4943b50ff2 Unlock the frame rate, shorten cold starts, and describe the Ocarina build in the docs.
Ocarina steps its game by the clock (the same frame-numbered walk covers half the distance at 120 fps), so in a build
without the fps60 and realtime patch sets the pacer holds frames to the frame limit alone: any rate from 30 to 1000,
the monitor's rate, or unlimited (164 fps average in Kokiri Forest). The menu always shows the row, with 165, 240 and
Unlimited added. NX2NAVI_PACE_HZ sets the pacer's rate for tests.

A compute pipeline is compiled outside the pipeline lock, and one compile serves the replay and the boot prebuild
alike; the prebuild uses half the CPUs. The guest waits at most NX2NAVI_PREWARM_WAIT_MS (3000) for the boot prewarm,
which then goes on in the background (a cold start waited 9.8 s). NX2NAVI_TEST_PAD_AT attaches the test gamepad late
and presses it, to test a controller switched on in play.

README, docs/architecture.md, docs/controls.md and AGENTS.md describe the Ocarina build.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
9a5b1163f3 Make every settings menu row work for Ocarina and give the controls Ocarina's actions and keys.
The Screen tab hides Game resolution when the build has no output and scene patch sets, and the resolution code no
longer grows the memory pool for it. FSR sharpness now also runs when the game image is shrunk to the window, which is
always the case for Ocarina's 2560x1440 picture at 1920x1080, and the overlay drops NX2navi's fixed 3D scene size. A colour
profile set in nx2navi.ini now applies without the menu. The Game tab hides the frame limit in builds without frame-rate
patch sets and lists the game languages the RomFS ships, adding Polish and Brazilian Portuguese. 5.1 sound is reported to
the game's virtual output device. The remap page describes each button as Ocarina's controls screen does, gives each
D-pad direction its own description and drops NX2navi's shake row; the keyboard defaults follow Ocarina (Shift dashes on A,
Ctrl puts away on B, O and N for the ocarina and Navi, middle mouse resets the camera). docs/controls.md is updated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
chrg6
77d0c0b84e Port Ocarina of Time (Switch 2) to the recomp host
The NVN2 front end and the SM86 to Maxwell shader lowering (tools/xlate/AmpereLowering.cs, mesh and task stages,
bindless texture pools, BRX jump tables, the NVN2 compute c0 layout) with four translator patches (0017-0020) bring the
opening of the game to 58-60 fps on the Vulkan renderer.

This round fixes the haze: SM86 IPA is lowered as a plain Maxwell IPA.PASS (texture coordinates were corrected for
perspective twice); LDSM, TXD, both F2IP byte forms, HMMA, MOVM and HFMA2.RELU are lowered and spill mode has eight
uniform register groups; conditional rendering keeps the newest counter report per address and treats a report as
pending until its value is in guest memory, so occlusion tests and the depth clears around the depth copy behave; and
the upscaler stand-in decodes the post pass's sRGB picture before writing the linear target. Tensor-core programs keep
the stand-in unless NX2NAVI_NATIVE_TENSOR=1, because their lowering does not match the hardware yet.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-07 05:04:39 -05:00
Valiantsin Dzerakh
0478c13e45 Import the base tree (MIT, see LICENSE) 2026-11-07 05:04:38 -05:00