A shader whose texture pool array has 32768 entries reads slot 32767 for every texture the game numbers from 32768 up
(Ocarina's pool has 33068), but nothing in the log said such a shader was in use: vk_texture_register warned only for
slots past VK_POOL_TEX (40960), which Ocarina never registers, and vk_pipeline.c spirv_pool_rebind accepts the shorter
arrays silently. gfx_shader.c pool_short_note now counts the shaders entering the memory cache with such an array
(carry_usable keeps carried ones out, so these come from a translator older than the runtime) and logs the first;
vk_texture_register logs once, with that count, when a slot between 32768 and 40959 is registered while one is in
use. The count is kept per shader in gfx_shader.c (gfx_shader_pool_short_seen) rather than per pipeline stage in
spirv_pool_rebind, which runs once per module built.
Diagnostics only. tests/carry_pool_check.py now also checks that pool_short_note counts only shaders of the earlier
length and logs once; every runtime file compiles, with no new warnings in gfx_shader.c and vk_texture.c.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
sweep_pressure's second census, rel_census(cap, 1), ran whenever the released entries held more than their bound and
less than 1.25 times what they may keep. Its line says "(kept past it while the card has room)". Without room, or
without the hold, vk_tex_release.h trl_keep returns the bound itself, so keep equals cap. The census then also ran
for bytes between the bound and 1.25 times it, which drop_stale was taking down anyway, and the label claimed room the
card did not have. Now it runs only when keep > cap. The line stays for players: it is what tells why released
textures stay past their bound (a 2026-11-13 session held 7,150 MiB against 4,008 and never said why), and at most one
walk a minute, 60 a run, costs well under a millisecond. rel_census's comment says when the room census runs.
Checks that passed: pass_cc_check on vk_texture.c, no new -Wall -Wextra warnings, tex_release_check (trl_keep's rule).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Past RELEASED_HARD, sweep_hard walks every released entry (up to 16k), classes each, and drops up to HARD_BATCH of them
in one call, under the texture lock, on the thread that releases (a guest thread's finalize or the replay's
overwrite_others). The rule before dropped one entry per release, so the work now comes in bursts, and nothing
measured a burst.
Each call is now timed, and counts the entries it walked, the entries it dropped and the entries written back first.
A call of 2 ms or more logs "released textures past the hard count: a batch walked N entries and dropped M (K written
back) in X ms", 16 lines at most. The trace=perf "texture origins" line adds the calls of its window, their time and
the longest. The behaviour changes the finding proposes after a measurement (a cap on the GPU class in trl_hard_pick)
are not part of this commit.
Diagnostics only. Checks that passed: pass_cc_check on vk_texture.c, no new -Wall -Wextra warnings,
tex_release_check, tex_compact_check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Under VRAM pressure or a standing mirror room request, sweep_pressure runs every eighth submission. evict_idle walked
the whole texture table and, when it found no idle candidate, returned before it set evict_wait, so the next check
walked it all again. The released-list loop before it started from the head each time and passed every stale entry it
could not drop (up to RELEASED_HARD) until PRESSURE_STEP drops.
evict_idle now keeps a wait of its own after an empty walk: no new walk for EVICT_EMPTY_WAIT (16) submissions. It is
a separate idle_empty_wait, because evict_disused, which sweep_pressure calls right after evict_idle when it freed too
little, stops while evict_wait is ahead, and sharing that wait would have stopped disuse eviction for as long as the
idle walk stayed empty. The released loop looks at up to EVICT_LOOK (1024) entries a check from a cursor (press_at)
that rel_unlink moves off a leaving entry, as for sweep_at and aged_at. It starts from the oldest again at the first
entry released less than STALE_FRAMES ago or at the list's end. The trace=perf eviction line counts the empty walks
and their time.
Not reproduced before the change: the 0.10.0 session had no VRAM pressure. Checks that passed: pass_cc_check on
vk_texture.c, no new -Wall -Wextra warnings, tex_release_check, tex_compact_check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Past RELEASED_HARD, sweep_hard drops up to HARD_BATCH released entries in one walk (2969005e). drop_tex writes a
gpu_dirty entry back for DROP_HARD when the fence write-back would take it, and each write_back_n(&e, 1) call ended
in vk_upload_flush(1), a GPU round trip. A batch with many such entries waited once per entry, under tex_lock, on the
thread that releases, the replay's overwrite_others included. The rule before dropped one entry per release, so it
waited at most once.
Now sweep_hard gathers the picked entries the same way drop_tex decides on them: an entry whose storage the CPU
rewrote since the GPU drew into it loses gpu_dirty, and one wb_wanted takes is written back. All of them go back in
one write_back_n call, one upload batch with one wait. write_back_n clears gpu_dirty, so drop_tex then finds nothing
to write back. The same entries go, in the same order, and the entries written back are counted in n_drop_wb as
before.
Not reproduced before the change: the 0.10.0 session never reached RELEASED_HARD, and no check without a device
covers write_back_n. Checks that passed: pass_cc_check on vk_texture.c, no new -Wall -Wextra warnings,
tex_release_check, tex_compact_check.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- nx2navi.ini.example said the stutter map is written every 10 minutes and at exit; since 7b0dbeb1 it is every 5
minutes of play (stutter_map.c SM_REPORT_NS), at a focus loss in play and at exit, and since 2f640fb8 a run of
consecutive long frames counts as one hitch with their summed time. The paragraph now says both.
- docs/building.md had no paragraph for tests/freeze_hold_check.py (0e0cfe08), while each other header-alone check has
one: it now says what a change to runtime/freeze_hold.h or vk_memory.c freeze_pass must pass and what it checks.
- vk_texture.c released_cap_bytes named "a thirty-second of the installed memory" as the source of the bound even when
plat_mem_info gave no size and the bound fell back to 1024 MiB; that case now reads "the default without the
installed memory's size".
Text only. check_content passes; freeze_hold_check passes; vk_texture.c compiles with the dev flags and with -Wall
-Wextra with the one warning it had before.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The line said "a quarter of the video memory budget" whenever the card's rule raised the bound, also when the smaller term was an eighth of the installed memory: on the RTX 5090 with 32 GB of the 2026-11-13 session the bound of 4,008 MiB came from the memory, not from the card's 7,854. The line now names the term that won, and the default's own.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A scratch grown past 32 MiB for a large texture went back to the usual size only when the next ASTC upload asked for one, so in the 2026-11-13 session the decoder held 224 MiB for the 70 s after the first area load and from a later load to the session's end. Each present now gives it back once no texture needed more for 5 s; nothing is made then, the next request makes the usual scratch, and the buffer is freed once the upload batches recorded so far completed, as before. The present only tries the decoder's lock, which can be held while VMA makes a block. astc_scratch_trim = 0 keeps the scratch until the next upload.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Whether a shorter hold could take some of the released textures' memory without a take-back finding its entry gone depends on what comes back late: the log said 452 entries (72 MiB) were taken back after a minute in the 2026-11-13 session, but not whether any was large or held content only the GPU made. A second line after the reuse line now gives the take-backs and the makes again after a drop by age for each kind (intact, overwritten, made by the GPU) and own memory (under 1 MiB or more), with the megabytes taken back after a minute; the kind of a dropped entry is kept with its key for the remake.
The census of what keeps the released textures over their bound ran only above a quarter more than they may keep, which with room on the card is twice the bound, so the session's 7,150 MiB against a bound of 4,008 MiB never got one. It now also runs while they are over the bound itself, at most once a minute and 60 times a run. Log lines only.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Past RELEASED_HARD (16,384) the sweep dropped the first released entry in release order that was overwritten or unsampled for 2 s, render targets included, whose drop vk_texture.c already ties to a black frame, and it walked the list from its head for every drop. At the end of the 2026-11-13 session the count sat at 16,384 for a minute while 12,811 of 15,734 released entries owned no memory. The entries now go by class: overwritten ones, then ones that come back intact and are past their usual take-back gap, then other intact ones, and only then ones whose content only the GPU made; still only unsampled ones, and the one sampled longest ago when all were sampled lately, as before. One walk takes a batch down to 256 under the bound. tex_hard_order = 0 keeps the rule of 0.10.1.
The drops past the hard count get a reason of their own, so the texture origins line and the reuse line count them apart from the sweep's drops past RELEASED_MAX, with the classes they came from. The class rules are in vk_tex_release.h and checked by tests/tex_release_check.py.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Through a nearest filter each of the game's shadow compares tests one texel, so shadow edges are stair steps of shadow map texels that crawl over the ground as the sun cascades follow the camera. The setting is off by default and read at start; with shadow_scale above 1 the samplers were already linear.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every report adds a line for video memory outside VMA (the driver's usage and budget per heap against VMA's blocks, and counts of pipelines by kind and by last use, stage libraries, compute pipelines, layouts and descriptor pools, with the swapchain, DLSS and FSR sizes), a line that splits the process's commit by owner (the game's heap and maps, device-local memory, VMA's host blocks, the C runtime heap with the shader caches, pipeline tables, texture cache, log queue and flight recorder in it, the driver's pipeline cache data and the rest), and a line naming what grew by more than 64 MiB since the report before and since play began. Every ten minutes of play and at exit a ranking line orders the categories by growth and marks those that only climbed; tests/mem_growth_check.py checks that bookkeeping.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Released textures go once they have gone unused for the hold, and what a switched-off upscaler or SMAA held is freed, with no setting to keep them. A vram_use line left in a settings file is known and read by nothing. Memory use is to be decided by the card's and the system's budget instead.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On an RX 580 the second device-local heap (2 GiB) takes what the first has no room for. On a GPU with one device-local
heap (an RTX 3050 Laptop, 4 GiB, 16 GiB of RAM) the budget wrapper and the texture placement sent everything past the
heap's reserve to system memory instead: 4096 and more texture images and every other allocation, held in the
process's commit (21 GiB). The system's commit ran out (31730 of 32023 MB), host memory imports failed, a pool was
left without a GPU buffer and the GPU wrote through its address: device lost. Now an allocation leaves out a full heap
only when another device-local heap has room, and a texture's second step allocates as before, past the budget, where
the driver keeps it in video memory or moves it out itself, and NX2navi's own VRAM pressure drops textures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A window minimized for minutes, a frozen game or a long load aged every released texture past its hold while nothing could take it back, so the first frames after it would make again the textures the frames just before it released. A gap between two submissions now counts at most a second.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A released texture now goes once nothing has used it for three minutes (six for content only the GPU made), measured
in wall seconds from a clock of the presents. In two players' sessions the game took released textures back within a
minute of the release or never, so the hold drops nothing it would ask for again. The size bound stays as the safety
net for a burst of area changes, and young textures may pass it, up to twice it, while the card and the system's
commit have room. vram_use defaults to low, which now means this hold; high turns it off and keeps the released
textures up to the bound as before, and balanced reads as low. The old low's values stay available as their own keys.
The reuse log line counts drops past the hold and splits its ages around it. tests/tex_release_check checks the rules
and the clock, and simulates sessions shaped by the logs against the old and new defaults.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every VMA allocation is counted under the file that made it until it is freed, so the new "mem: by owner" line
splits the device-local memory the driver reports into textures (live, GPU-drawn, idle, released, released too
lately to drop), pools and VRAM mirrors, upscalers, replay buffers, uniform snapshots, the device address table,
the ASTC decoder, present and post-processing, headroom spares, the free space inside VMA's blocks and what VMA
never allocated. "mem: host" gives the host-visible allocations, the process's commit and working set and the
game's heap. "vk: released textures" counts take-backs by how long the texture was released and textures made
again after a drop by a bound or a pressure, with the drop's reason.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The larger pool asks for 655,360 sampled images in one set where 524,288 were asked before. The start now logs the
device's limits for one set and one stage next to that count, warns when the count is over them, and a refused
layout ends the start with the limits named instead of a bare failure.
The log line for a slot registered past the pool names both slots a shader reads instead: the pool's last entry, and
the last of the old length for a translation carried over from the translator before. The comments say what they say
without an issue number.
The translator's identity changes with this pool size: after the update every install translates its shaders again
in the background, the earlier translations serve meanwhile, and a shader gets the ground fix once it is translated.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game makes a texture pool of 33068 descriptors, and the translator clamped every pool handle to 32767, so the textures registered from 32768 up were drawn with whatever slot 32767 held, often an empty image: ground went see-through after an area load until the area was loaded again. VK_POOL_TEX and the translator's TexturePoolLength go to 40960, and a slot registered past it is logged once.
With the setting on, textures no shader sampled for ten seconds are copied on the GPU out of the emptiest allocator
blocks into the holes of fuller ones, so the emptied blocks go back to the driver. A pass starts when the free space
inside the device-local blocks reaches NX2NAVI_TEX_COMPACT_MIN_MB (one block under VRAM pressure) and the block
table has blocks that hold nothing but such textures, with room elsewhere for what moves. It takes at most four
textures and NX2NAVI_TEX_COMPACT_FRAME_MB a frame, and none in a frame that loads an area, already made or uploaded
textures, or follows a long one. A released texture the size cap would drop is dropped instead of moved.
Only a texture whose image holds what the game's memory holds moves: uploaded, never written by the GPU, single
sampled, not depth. The entry takes the new image under the texture lock and its address generation moves, so every
slot, pool descriptor and memo resolves again. The old image and its views stay until the texture pool has taken
every set of its ring and the GPU is past the submissions recorded until then, as a retired texture's do.
Each pass logs what it moved and dropped, the blocks and bytes given back, and the time it took. A block emptied of
textures that the allocator keeps is left alone for ten minutes, and a pass that gave nothing back doubles the wait.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A log without the perf trace said nothing about the free space inside the allocator's device-local blocks, which the
driver counts as in use. Every 3600 frames (600 with the perf trace) a "mem: holes" line now gives the blocks and the
allocations in them, and for the memory type the textures use most the blocks that hold a texture, the textures and
VRAM mirrors in them, the blocks at most half full, and those of them that hold nothing but textures that could be
copied elsewhere or dropped: emptying those is the most a compaction could return.
The counting is runtime/vk_tex_compact.h, which also chooses the blocks to empty, with tests/tex_compact_check.py.
A texture entry keeps the block its memory lies in, so the table is built without asking the allocator per entry.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The bound on the released textures' memory only takes entries that are old enough and that no lookup reaches. The texture pool stamps every GPU-owned entry that a slot's last fill resolved to in each submission, a finalized slot's released entry included, so such an entry never counts as idle: in a session at 5120x2160 the released entries held 9.2 and then 10.1 GiB against a bound of 4,008 MiB, and its overwritten render targets were logged as "last used 1 presents ago". Nothing said which rule held how much. When the released entries stay a quarter over the bound after the drop, one line now splits them: released too lately, sampled lately, shown by a pool slot and not sampled (and of those, the ones another target was drawn over), reached by another lookup, next to go. No rule changes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The staging pool keeps 4 blocks of 64 MiB from its first use on a discrete GPU (2 on an integrated one, as before). A staging buffer or arena chunk that does not fit them takes the room of the kept staging buffers and idle arena chunks, then of the oldest upload batches in flight, which it waits for; an arena chunk a waited-for batch gives back is taken instead of a new one. Only when that makes no room (the open batch's own staging, staging buffers their callers hold, the blocks' fragmentation) does the pool grow by a block, and the log says so. The outermost vk_upload_end submits the open batch once it holds 64 MiB of staging, besides the NX2NAVI_UPLOAD_BATCH_MB limit; nothing is submitted or waited for once the device is lost. Entering Hyrule Field made 221 staging buffers (1,131 MiB) in one frame; on Linux each new 64 MiB block is a kernel allocation that tries 2-4 MiB pages first, and with the free 2 MiB blocks used up the kernel compacted memory inside those allocations: 30-360 ms each, and the load frame took up to 4.7 s instead of about 0.3 s (RX 6800 XT, amdgpu, 32 GB).
The budget spreads the streamed, compressed pictures over frames. A texture that is not block-compressed is as often the game's data, a height map or a table, and a draw that reads the stand-in in its place for a frame misplaces geometry or lighting. Up to 24 of them a present, of at most 4 MiB each, are made at once; pool_data_first = 0 leaves them to the budget.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A finalized slot shows its released entry while that holds the texture, and the pool's check passes released entries by, so no lookup reached such an entry and it counted as idle while every frame sampled it. Past the released entries' size cap or count it was dropped, and the slot showed the stand-in until the game registered it again. An entry sampled within the stale time is not idle now, and the count sweep leaves one that was used.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
In towns, kerb, stair and wall-top edges are drawn untextured for one frame when the game registers a round of streamed textures, and no pool entry of those textures goes to the stand-in in such a frame. A binding written into a draw's own set, and a slot that is unregistered when its marks are read, left no event until now.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The slope term is a bias per unit of depth slope across one pixel of the target. A shadow map made k times larger on
each side (shadow_scale 2 to 4) has 1/k of the slope across each texel, so the game's factor alone gave k times less
bias on sloped surfaces than at the game's own size, which is what shows as acne. vk_exec_draw.c slope_bias
multiplies the factor by the pass's scale for both the direct draws (record_fixed) and the queued mesh draws; the
constant term counts the depth format's smallest steps and keeps its value. Nothing changes at shadow_scale 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts: the settings key lists take both sides; frame generation keeps the camera-cut handling and logs its counters every 600 frames with the cuts among them; the pass-time mark moves into draw_viewport; mo_desc keeps the pose depth and notes the reader.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Ten slots a frame are noted as having no picture when their submission ends: the 128x72 and 64x36 volumes the game registers under new slot numbers in every frame. The events now tell a slot whose entry cannot be viewed in any kind a shader reads from one whose lookup found nothing.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A texture another target was drawn over is marked overwritten, dropped 600 presents later, and offered to the image reuse first. Neither asked whether anything still reads it. In a player's recording the entry of a second descriptor at the scene target's address was dropped that way and made again in the same frame from a released entry there, whose bits are the scene in another format: one frame nearly black with its colours exchanged, brightness 17 against 102 around it. An overwritten entry a draw, a read or the pool's marks used within those 600 presents now stays, and the image reuse passes over any released entry used within the last 16; tex_overwritten_used = 0 drops them as before.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
While the player runs through a town the game moves about 32 textures to new storage every four or five frames, back to back in one block, and a frame after their first upload every page of the block shows a write again. A texture up to 64 KiB keeps a hash of its storage and is uploaded again only when its bytes changed: of those, 0 to 4 in a hundred are (9 of 440 in one recording of 600 frames). A larger one has no hash and 75 to 94 in a hundred are uploaded again, whatever the size and format: 3,034 second uploads in those 600 frames beside 4,233 first ones, the ASTC ones decoded and encoded on the GPU a second time. The frames of the second uploads take 0.9 to 2.5 ms longer than frames without uploads, and the frames after them wait 0.3 to 1.3 ms longer for the GPU (six recordings of one player).
tex_same_big = 1 has textures up to 8 MiB keep the hash too. It is off by default: the bytes are read once more at the first upload and once at the comparison, 15 us each for 300 KiB, which together is about what the second upload takes on the submitting thread (27 us), so what it gains is the GPU's work and whatever else a second upload costs its frame, and that is not measured in play. A texture whose comparisons found other bytes twice in a row takes no hash any more, and an area load takes none.
The hash runs eight chains side by side and folds them, 20 GB/s against 7 for the one chain on a Ryzen 7 9850X3D, which the small textures' comparisons get as well. Each step is still a bijection of its chain and of the word it takes.
The pool log's buckets line counts the hashed uploads and the comparisons when there are any. --probe-vkmem has a case that passes with the switch off and on: the same bytes written again, other bytes, and the same bytes after two rewrites in a row.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
At every submission that binds the texture pools the replay checks each listed texture for CPU writes, and takes the write-watch snapshot of the 2 MiB regions that have none yet as the list comes to them: one query a region, since the list is in no address order. Standing still that is 5 to 10 queries and the check takes 0.11 ms. While the player runs through Kakariko or Castle Town the game writes about 32 textures into new storage every four or five frames, a region the CPU wrote is not frozen again for 1,800 submissions, and the check asked for 100 to 500 regions one by one, 2.7 times a frame: 0.5 to 1.5 ms a check, about 3 us a query, in five sessions of one player. The regions are now collected for the whole list first and asked in one query per run of adjacent regions. On this machine 400 queries of 2 MiB take 727 us and one query over the same 800 MiB takes 360 us. The same regions are queried and the same pages stamped, all of them before the list is looked at, as each entry's were before its own look; a run across the edge of a watched reservation is left to the queries by range. pool_presnap_runs = 0 asks region by region as before.
A released entry stays in the list until it is destroyed, the check does nothing for it, and the stamp it compares stays as it was at the release, so one whose region took a write later missed the region check at every submission from then on and was fetched only to be passed by: 1,000 to 6,300 entries a check, with up to 8,192 released entries kept. The list now carries the released state, set at the release and cleared at the take-back, and the check passes such an entry by without touching it or asking for its regions.
The pool log's freshness line counts the released entries passed by, and its snapshot queries count the queries either way. --probe-vkmem has a case for the queries by run.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The rule for a slot that shows another texture left out the slots that showed nothing when the game registered them: the game takes slots whose texture it finalized some time ago for its next textures and draws with them at once. Past the 16 a refresh makes, such a slot kept its stand-in until the next round. One of them was an effect's texture with a transparent ground, which drawn with the stand-in was a flat grey patch for one frame, at each of two rounds of registrations four frames apart in a player's recording. A slot registered since its last lookup that found a texture now counts with the shown ones, within the same 64 a present.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game finalizes a texture object while another one it initialized at the same storage with the same parameters stays registered in the pool, and the entry the two share is released all the same. Two frames later its image went to the next texture of its parameters and the entry was dropped; the slot then had nothing to show, because the pool makes no entry for storage the CPU cannot read, and kept its stand-in until the game drew into the texture again. Ocarina's 384x384 shadow maps are such textures: a player's recording has four slots of them sampled as stand-ins in the frame after three of their images had gone to other shadow maps, and a house front without its shadow in that frame. The reuse now passes over a released entry that a slot which is not finalized names; tex_reuse_named = 1 restores the old choice.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game renders through one descriptor and samples through another that differs only in swizzle, and both read the
same pool memory. When one of them got memory of its own (read after an overwrite), the other kept reading the pool
bytes, which the first no longer updated. Now the image and its swizzle siblings become one image in memory of its own:
entry_of hands that image out for any swizzle of its key. If a live descriptor of another format or geometry reads the
same storage, the image stays in pool memory as before. The perf line counts both outcomes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game overlaps transient render targets in its memory pools, and the replay binds their images into that memory.
An image of another format or size drawn over an image's memory leaves the GPU's tiled, compressed texels of the
other image there. Ocarina's volumetric fog reads its 360x202 RGBA32F fog-volume texture at the start of a frame,
before drawing it again, and the 1440x810 R11G11B10F bloom target had been drawn over that memory at the end of the
previous frame: the fog lighting took those texels as volume distances and types (values from 1e-12 to 3e33 in a
frame dump where the texture holds 9 to 50000), and drew teal splotches in Kokiri Forest's fog on AMD and NVIDIA.
Each pool-bound image the GPU writes marks the pool-bound images of another layout that overlap it; one read while
marked is dropped and comes back with memory of its own from then on, so it keeps what it last drew (the read that
found it gets an empty image once). NX2NAVI_TEX_CLOBBER=0 keeps such images in pool memory.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
An RX 580 (8 GiB, AMD 23.10) shows its memory as a 6 GiB device-local heap and a 2 GiB device-local, host-visible
one. Asked for device-local memory without a budget, VMA chose the first heap every time: a save load put 5.6 GiB
there against a budget of 5.1 GiB while the second heap held 69 MiB, and the next submit failed with
VK_ERROR_OUT_OF_DEVICE_MEMORY. create_tex now allocates with VMA_ALLOCATION_CREATE_WITHIN_BUDGET_BIT: device-local
memory of any heap first, then any memory type the image allows, and only then past the budget as before. The log
names images placed outside the first device-local heap.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina streams its textures by detail level: while the player moves it registers about 32 pool slots with their next level every four or five frames. A pool refresh made 16 of them and wrote the stand-in into the set for the rest until its next round; the set is read as it is when its submission goes to the queue, so an object whose slot was among the rest could be drawn grey for a frame. A player's recording shows 1,525 such slots in 600 frames, each with its texture made later in the same frame. A slot whose entry in the set is a texture's view when it is looked up now has its texture made by that lookup, beside the count budget and the frame's creation time, 64 of them a present; pool_shown_first = 0 leaves them to the budget. The flight recorder also notes a slot that still had no picture when its submission ended.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
When the pool's entry of a slot goes from a texture's view to the stand-in, events.tsv gets a line with the slot and what its own texture was at that moment: finalized, released, superseded, overwritten, uploaded, its storage readable, held out. The set is written with update-after-bind, so every draw of the submission that samples the slot reads the stand-in from then on; the check at the marks' read-back comes a frame later and finds the slot resolved again.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Three more texture events for a dump's events.tsv: after each upload a hash of 64 probes of the storage and how many of them were all zero, so a second upload a frame later tells new bytes from the same ones and a first upload of unfilled storage shows; a slot registered with a CPU-written texture, with what the slot named before; and a slot a shader sampled that has no image of its own and follows none, so its stand-in was on screen. They are for telling why a texture shows wrong for one frame while the game streams textures in.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The limit on what a frame's pool refreshes may spend creating textures was charged with the whole refresh, including its check of every entry the pools hold. In Kakariko that check takes 0.8 ms a submission, six submissions a frame, so most of the 6 ms was gone before a texture was made and the frame's later refreshes made none: 87 refreshes in 600 frames, with 1,090 slots left between them. The game moves about thirty textures to new storage every four or five frames there, and the ones a refresh left were on screen as their grey stand-ins for a frame; a player's recording shows three lamp posts turn grey for one frame that way. The limit now counts the time the lookups spend making entries and uploading them the first time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
When a slot's own entry was released, slot_resolve took any live entry at the same address, and Ocarina's per-frame
render targets share storage. The half-size ambient occlusion term (640x360 at a 1280x720 scene) followed the bloom
pass's 480x270 target there every frame: the blur that writes the term kept its top-left 480x270, the upsample stretched
that over the screen, and every contact shadow sat 1.33 times further from the top-left corner than its object (doubled
shadows below and right of Link, shadows of terrain out of view). During a hit effect the same slots followed its
1130x86 strip instead, the term read zero over most of the screen, and the right 44% of the scene went black.
Block-compressed formats keep the old rule, as a GPU encoder renders their blocks through a smaller view of the same
storage. The first eight refusals are logged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game finalizes texture objects on its own thread ahead of the replay, which still draws the frame the game recorded
before that; on the console the memory still holds the texels those draws read. Kakariko moves about 30 of its
textures to new addresses every four or five frames, and each move finalized the old descriptors. The replay's draws
of the frame before then met finalized CPU-written slots, and the stale rule gave them the stand-in even when their
own entry was still there with its content. The village's haze dropped out of a frame a few times a minute, and the
haze sprites that met a stand-in left hard-edged clear patches. A play session in Kakariko logged up to 4,805 stand-in
lookups in 60 frames, 1,826 in the 60 frames around one haze dropout, and 612 in the 60 frames after a run of
patched frames.
Such a slot now resolves to its own entry while that entry was uploaded or drawn by the GPU, and was neither superseded
by another descriptor at its address nor overwritten. The lookup samples the image as it is: it neither takes the
entry back nor reads its storage, so freed storage is still never read (the access violation the stale rule was made
for). NX2NAVI_TEX_STALE_KEPT=0 gives the stand-in again. The perf log's finalize line counts these lookups.
In a replay of a recorded Kakariko walk, most 60-frame windows went from stand-ins to the kept image (up to 328 a
window, stand-ins 0). In play, stand-ins remain in short bursts where the entry was already gone (up to about 2,000 in
60 frames, against the kept image in most windows). The tester still sees flicker that the 640x360 frame recorder
does not catch; that is not settled by this.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Once the released entries pass RELEASED_MAX, the sweep dropped an entry that comes back intact as soon as its 120
presents were up. Kakariko releases the ASTC textures of its hazy air and takes them back every few hundred frames, so
about 30 of them went each time, and the frame that needed one again sampled its stand-in while it was made and
uploaded anew. Such an entry now waits out GAP_TIMES the longest it stayed released before a take-back, as an entry
whose content lives only in its image does. NX2NAVI_TEX_KEEP_TAKEN=0 goes back to the old rule, and
NX2NAVI_TEX_RELEASED_MAX (a test) lowers the count from which the sweep starts, so a short run reaches it.
The haze still dropped out with this alone: most of those frames came from finalized slots, which the next commit
deals with.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With NX2NAVI_REPLAY_PIPE=1 (off by default) the submitting thread hands a group's chunks to the workers, takes chunks
of it itself until none is left to take, and goes on with the ops after the group in a new command buffer after the
chunks' places in the part (vk_sync_append_later), also into the next group's front pass.
Up to four groups are handed out and not in their part yet; their chunks wait in one queue in the order of the stream.
The submitting thread waits for them only where the order needs it: for room, before a part goes to the GPU, before
copies and texture or buffer clears, where DLAA's run or the contact shadows' hook acts, and where a lookup would make
a texture entry or take back a retired one (the op goes again afterwards, as a chunk's does in turn).
What the chunks read stays as the stream had it while the submitting thread runs ahead: uniform snapshot drops count
from their place in the stream, a chunk reads only the inline uniform updates before its group, the HDR present's
source goes by stream position, the texture pool set syncs under the chunks' lock, each group keeps its own render
conditions, occlusion segments and closed query slots, and the queries after a group's last report go into the next
segment made after it. A group's first chunk runs its pass hooks after the group before began its pass; turns wait
for every earlier chunk, of earlier groups too. Locks the chunks take, the submitting thread takes while it is behind.
Draws keep the sampled-texture descriptors they resolved per draw context and reuse them without the texture lock
while their slot is unchanged; the workers waited for that lock at nearly every draw. Texture lookups that change
nothing no longer wait for their turn. The perf line says where the submitting thread waited, what the chunks took,
and which texture lookups waited; NX2NAVI_GPU_TIMELINE also shows the chunks and the waits.
Off by default because it does not pay yet: in Hyrule Field with 3 workers it shortens the replay (11.5 against 12.1
ms a frame) but not the frame (49.2 against 49.6 fps in the same batch). The GPU gets a group's commands only once its
last chunk is recorded, so the main thread's wait for the GPU after the frame's first submission grew by 0.8 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>