A scene draw whose vertex shader reads a matrix palette and whose vertex layout feeds its joint inputs unsigned integers is drawn a second time into the motion vectors with last frame's blocks and camera, as the player's meshes are, with the same depth test and the same guard for bones that turn sharply. Which draw of last frame it continues is decided when the vectors are made, so the replay's threads cannot change it; a draw in doubt keeps the camera's motion. The player's own draws stay with their ownership records.
skin_motion (NX2NAVI_SKIN_MOTION) is 1 by default and 0 turns it off. The motion status line now counts the skinned draws seen, those drawn with their own motion and the others by reason. It has compiled and passed its checks; it has not been played.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Registrations no longer move the generation while a submission is replayed, but the replay's own lookups still do when they take a released texture back or make one, and so does a texture another thread of the game finalizes meanwhile. Every such move drops the whole-draw skip, the shader memo and the kept descriptors of a draw, buffer descriptors included, whether or not the slots the draw reads changed.
A new line in the texture pool's periodic log says, per frame, how many graphics binds found the generation moved within their command buffer, how many whole-draw skips and shader memo hits it alone cost, and how many kept buffer and texture descriptors were resolved again from the values they were kept under. One play session then shows whether checking only the slots a draw reads would spare anything. The counts are kept per recording context, since the replay workers record at once.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The stand-in for the game's upscaler enlarged the scene with a linear filter, which is softer than the console's picture. It now enlarges with the edge-adaptive filter the present already scales to the window with: the same shader, built a second time with a constant set so it squares what it filtered, as the linear pass does. The stored square-root values are filtered as before and the decode is the same. standin_filter = bilinear brings the linear pass back, and the setting is live. The linear pass also stays where nothing is enlarged and while DLSS or FSR 3.1 runs, since that upscaler scales the scene itself and its picture goes over the stand-in's. The movies do not go through this pass and are not changed.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every indexed draw bound its index buffer. The command buffer's kept state now holds the last bound buffer, offset and index type, and a draw with the same three records no bind. They are cleared with the rest of that state wherever the replay continues in another command buffer or something else has bound into this one, as the kept vertex streams are, and the indices the replay makes itself for quads, line loops and byte indices go through the same bind.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw into targets the game renders every frame is left out while its shaders or pipeline build, because the next frame draws it again. A storage buffer the shaders write or an image they store into is not redrawn that way: with the draw left out, that memory keeps what it held for everything that reads it. Such a draw now takes the wait a draw into one-shot targets takes, from the frame's wait pool, and is skipped only at the end of it. Only the stages already translated can say that they write; a draw whose writing stage is still being translated is skipped as before. draw_writers_wait = 0 turns the rule off, and the periodic line about waited draws counts the draws that waited by it alone.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A pass mark names the pass or dispatch the GPU had started and the last it finished. When the two are the same mark the GPU stopped in between, and the report named nothing: in a player's log of 0.9.2 (RX 6700 XT) both were one compute dispatch, with 51 later marks made and none started. The report now adds the mark that never started and the kinds of commands the replay recorded between the two (copies, clears, the upscaler, write-backs), which the gap notes already name for the GPU pass timing and now keep for every mark.
draw_crumbs = 1 (off by default, AMD buffer marks only) also writes a mark wherever the shaders or the pipeline state change inside a pass. The device losses reported on RX 6600 and RX 6800 class cards end inside one scene pass of 30 to 100 draws and the draw that hangs is not known; with the setting on, the report lists the shaders of the draws the GPU had not finished.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
In towns, kerb, stair and wall-top edges are drawn untextured for one frame when the game registers a round of streamed textures, and no pool entry of those textures goes to the stand-in in such a frame. A binding written into a draw's own set, and a slot that is unregistered when its marks are read, left no event until now.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Mesh shaders as compute, the texture that gets memory of its own, staged mirror uploads and the shorter wait for the GPU, widened write-watch queries, the video memory limits and reserve, early upload batches, the asynchronous replay, the hot-pool rule and the recording thread on AMD cards without mesh shaders were measured on a Radeon RX 580 and run on no other card. Each keeps what 0.9.1 did unless the key or its own setting says otherwise; the key gives the defaults the way the device profile does. The notes describe them as that option, hold main's two new entries in one Changed section, and list the white edges in towns as a known issue.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game's scene upscaler samples the post pass's picture through an RGB9E5 texture at the scene target's address. On the console both are one memory; here they are two images, and the RGB9E5 one kept what it held when it was made. With NX2NAVI_NATIVE_TENSOR=1 the network therefore read an old picture or the target's R11G11B10F words as shared-exponent texels, the source of the infinities and noise it wrote. The stand-in already read the target's image for this reason. A network program's output image without storage use is now logged.
Only dispatches of tensor-core programs take the new path, and those run only with NX2NAVI_NATIVE_TENSOR=1, which stays 0 by default. The file compiles without warnings; no game run has checked the picture.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The slope term is a bias per unit of depth slope across one pixel of the target. A shadow map made k times larger on
each side (shadow_scale 2 to 4) has 1/k of the slope across each texel, so the game's factor alone gave k times less
bias on sloped surfaces than at the game's own size, which is what shows as acne. vk_exec_draw.c slope_bias
multiplies the factor by the pass's scale for both the direct draws (record_fixed) and the queued mesh draws; the
constant term counts the depth format's smallest steps and keeps its value. Nothing changes at shadow_scale 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Conflicts: the settings key lists take both sides; frame generation keeps the camera-cut handling and logs its counters every 600 frames with the cuts among them; the pass-time mark moves into draw_viewport; mo_desc keeps the pose depth and notes the reader.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Ten slots a frame are noted as having no picture when their submission ends: the 128x72 and 64x36 volumes the game registers under new slot numbers in every frame. The events now tell a slot whose entry cannot be viewed in any kind a shader reads from one whose lookup found nothing.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With the HUD hidden the screen showed the scene at its render size instead of the upscaler's picture. The upscaler ran at the pass after the game's own upscaler, taken for the pass the HUD is drawn into. Without a HUD the game draws no such pass: the next one is the frame's last, which encodes the stand-in's scaled scene into the 8-bit output. The upscaler's picture went into that target and the last draw drew over it. A player's save with the HUD off showed blocks of render pixels, a picture jumping by a render pixel between frames, and the undrawn edge row in white, at every FSR mode and at Native AA; every test save until now had the HUD on. vk_dlaa_upscaler now runs the upscaler right after the stand-in of the game's upscaler wrote its output image, and puts the picture there (NX2NAVI_DLAA_AT_UPSCALER=0: as before).
The edge fill moves to the end of each pass that took the jitter (vk_dlaa_pass_end), for the pass's colour targets and depth, in one copy of eight regions per image. Filled only before the upscaler, the undrawn row had already been read by the water, the bloom and the anti-aliasing pass.
On a copy of the player's save (HUD off), FSR 4 Ultra Performance, world slowed to 1/20, present screenshots 0.25 s apart: the picture moves 0.00 to 0.02 px between shots (old placement: a jump of one render pixel in 5 of 20), the change on edges is 1.9 against 16.9, and no shot has the white row (half had it, with HDR on). Native AA, Performance with HDR, and FSR 3.1 are steady and clean as well; the save with the HUD on is unchanged. A run through a stream: 0 of 106 shots with a bright bottom edge (20 of 102). Frame rate 58.3 fps against 58.6.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
While the player runs through a town the game moves about 32 textures to new storage every four or five frames, back to back in one block, and a frame after their first upload every page of the block shows a write again. A texture up to 64 KiB keeps a hash of its storage and is uploaded again only when its bytes changed: of those, 0 to 4 in a hundred are (9 of 440 in one recording of 600 frames). A larger one has no hash and 75 to 94 in a hundred are uploaded again, whatever the size and format: 3,034 second uploads in those 600 frames beside 4,233 first ones, the ASTC ones decoded and encoded on the GPU a second time. The frames of the second uploads take 0.9 to 2.5 ms longer than frames without uploads, and the frames after them wait 0.3 to 1.3 ms longer for the GPU (six recordings of one player).
tex_same_big = 1 has textures up to 8 MiB keep the hash too. It is off by default: the bytes are read once more at the first upload and once at the comparison, 15 us each for 300 KiB, which together is about what the second upload takes on the submitting thread (27 us), so what it gains is the GPU's work and whatever else a second upload costs its frame, and that is not measured in play. A texture whose comparisons found other bytes twice in a row takes no hash any more, and an area load takes none.
The hash runs eight chains side by side and folds them, 20 GB/s against 7 for the one chain on a Ryzen 7 9850X3D, which the small textures' comparisons get as well. Each step is still a bijection of its chain and of the word it takes.
The pool log's buckets line counts the hashed uploads and the comparisons when there are any. --probe-vkmem has a case that passes with the switch off and on: the same bytes written again, other bytes, and the same bytes after two rewrites in a row.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw can be left out before it opens a render pass, and the pass list of a frame capture then showed nothing of it.
passes.txt now ends with the rejected draws of the captured frame by mesh or vertex draw and reason, each with the
first program it met, and says so when there were none. A draw left out by NX2NAVI_SKIP_PROG or NX2NAVI_SKIP_SHADERS
is counted under a reason of its own. The frame to capture and its files are set together under the recorder's lock.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
gpl noted them in ssbo_info, which the bind skip and the kept descriptors leave out once they have warmed up: the
submissions were taken as reading no guest memory again, and the grass and moss flickered again after a minute of play
(every submit wait of a 2100-frame run ended without the GPU). gpa_reader looks once per pipeline for a table binding
and notes the submission at each bind_resources and mo_desc.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The table names pools without a mirror, guest memory the GPU reads as it runs, and nothing marked such a submission
live: with NX2NAVI_MIRROR_STAGE the submit wait ended once the replay had submitted, and the game wrote the next frame's
foliage instances while the GPU still drew from them (small grass and moss flickering and sliding as the camera turned).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
While an area loads, every refresh left slots, and with any left the next one walked the table: about 67,000 slot reads
and 1.65 ms of the replay per submission in Kokiri Forest on an RX 580, six submissions a frame (profile 2026-11-11:
pool_fill and the slot lookups under the first pool draws, mesh_emu_draw's among them).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each draw's indices are now a range of its own and its task records too, reserved by an allocation shader (one
invocation, mesh_emu_alloc_spirv) for the run of draw records queued: before the task stages the task records and the
index ranges of draws without a task stage, after them the index ranges of the others (mesh workgroups with output,
which the task stage now counts in the record, times OutputPrimitives x vertices per primitive). The mesh stage takes
its indices from the draw's range with an atomic in its record; vertex slots stay the arena's, as the indices name
them. So no draw's stages need another's, and the queue (MEQ) records the fills as the draws come, then at the
pre-pass command buffer's end (vk_sync.c pre_end -> vk_exec_mesh_flush): allocation, every task stage, allocation,
every mesh stage, a barrier between each. One by one each draw took three barriers and copied the arena's counters
after the draw before it: an RX 580 spent 5.5 ms of a frame's GPU time on 69 draws' stages in Kokiri Forest.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A split hands the part to the queue and seals its texture pool set; the next part takes another set of the ring and
refreshes its entries first. The splits for the mesh stages made 5 parts a submission and 6 set switches a frame at
2.3 ms of replay each (Kokiri Forest on 0.7.1, an RX 580: replay 32-38 ms a frame, the replay thread blocked on fences
26-35% of the time, 79 waits for a set the GPU still used). A cut (vk_sync_cut) ends the command buffer without
submitting it: the part and its pre-pass command buffer wait in a chain and go to the queue, in order, with the next
part that does, so the set is the same one throughout.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each emulated mesh draw ended the pass, ran its stages between four barriers and began the pass again: a pass of 20
emulated draws became 20 passes, and on an RX 580 6 to 7 ms of a frame's 30 ms of GPU time went to the gaps between
passes (gpu_passes in Kokiri Forest: 8.7-10 ms per frame outside the game's passes and dispatches, 6.3-7.7 ms of it in
273-306 gaps with barriers only; 71 emulated draws a frame, 36 of them indirect). Now the first emulated draw of a pass
ends the part there (vk_exec_split_now), so the pass begins a new part, and the stages of every emulated draw of that
pass, the indirect ones' ring entries included, go into the part's pre-pass command buffer (vk_sync_pre), which the
queue runs after the mirror prologue and before the part; the pass is not split again. NX2NAVI_MESH_EMU_BATCH=0 (Lama
patches: Mesh emulation before the pass) brings the split back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
On AMD's driver for Polaris (RX 580, 23.10) a store between a pool texture's access chain and its sample left the
quad's helper lanes out of the code in between: derivatives at a triangle's edge were garbage and edge pixels came out
dark, the dotted lines along the paths' triangles since 0.7.0 (frame dump f1714: the colour pass covers every pixel,
the depth test is not what drops them). Each access now notes its slot in a Private variable; before each return of
the entry function and before a kill, terminate or demote every noted slot is marked, an unset one going to a spare
slot past the pool. Accesses in loops or outside the entry function note theirs in a ring of 8, marked in a loop at
the way out. Checked with spirv-val on the 45 marked shaders of the dump.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The emulation's barriers named only synchronization2's SHADER_STORAGE_READ/WRITE bits (above bit 31). With AMD's
driver for the RX 580 (23.10.01) the indirect dispatch of the mesh stage, which reads the {groups, task workgroups, 1}
the task stage had just written, launched no workgroup: mesh.txt showed 0 mesh groups started for every draw with a
task stage while its record held 32 x 12 x 1, and Kokiri's moss foliage and Link's door were missing. The masks now
also carry MEMORY_WRITE and MEMORY_READ, as the replay's general barrier does.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Draws with a task stage drew nothing on an RX 580 although their task records ask for mesh groups (mesh.txt), and the
same converted stages produce vertices on lavapipe. Header words 4-7 now count, per submission, the emulated mesh
workgroups that started, those whose task record covers them, those that reached the output copy and the primitives
those declared; mesh.txt prints them after each draw.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
c0_info keeps the last bank per stage and reuses it when the inputs (storage and uniform bindings, base instance) are
equal, but task and mesh shared the compute entry and the inputs do not name the stage, while the storage table sits at
0x670 for the task stage and at 0x770 for the mesh stage. When a program's task and mesh stages bind the same storage
buffers, the second stage got the first one's bank and read zero storage addresses. In a Kokiri Forest frame every
draw with a task stage (moss foliage, Link's house door) launched mesh groups that made no vertices, while mesh draws
without a task stage drew.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The 8 point-list mesh programs of Ocarina 1.1.1 (32 points, position and point size) were left unemulated. Their
indices are single uints and the point size goes to an extra vertex slot, which the generated vertex shader writes to
PointSize; the draw asks for a point list (the pipeline key's topology class follows the draw's primitive for mesh
draws), chosen from the mesh stage's OutputPoints. A mesh draw from a nonzero first workgroup is drawn from 0 as
before, now with a warning in the emulated path too. All 1016 programs convert and pass spirv-val.
(cherry picked from commit 8900aeaffa3264e4cc655ffd487cb2d2f3e3dd17)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The task records were a fixed 4096 per submission (3 KiB each): a dense patch of grass that launches more task
workgroups in one submission lost the rest silently. Their count is now a push constant (NX2NAVI_MESH_EMU_TASKS,
default 16384) and the arena defaults to 256 MiB. The header counts what the stages asked for past the capacities too;
before the counters start over they go to a readback ring, and the perf line reports the most one submission used of
the vertex slots, indices and task records, and the mesh workgroups that did not fit. The first draws the emulation
skips are logged with the reason.
(cherry picked from commit 81cfd91bf468f13e4debf287d080f96637a4c382)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Without the extension every mesh draw was skipped ("mesh draws need VK_EXT_mesh_shader: skipped"): on an RX 580 the
game's grass and foliage were missing. The translator already builds each task and mesh program as compute code that
MeshSpirv.cs wraps into TaskEXT / MeshEXT modules; runtime/mesh_emu_spirv.c turns those modules into GLCompute ones:
outputs and payload move to workgroup memory, SetMeshOutputsEXT's counts are kept, and the entry function's end
reserves vertex slots and indices in an arena with atomics and copies the vertices and triangles out (task: the payload
and the mesh group count go to a task record, and the mesh dispatch to the draw record). A generated vertex shader
reads the vertices back for the game's fragment shader. Checked with spirv-val (Vulkan 1.3) on the 1016 task and mesh
programs of Ocarina of Time 1.1.1: 1008 convert and validate; the 8 point-list meshes stay unemulated.
vk_pipeline.c gives an emulated mesh pipeline a layout whose task and mesh bindings are visible to compute, with push
constants and a compute-side descriptor template, builds the generated vertex shader's graphics pipeline and the two
compute pipelines; vk_exec_draw.c prepares each mesh draw as before, then outside the pass zeroes the arena counters
(first emulated draw of a submission), fills a draw record, pushes the same descriptors to the compute bind point,
dispatches the task and mesh stages (direct, or from the indirect ring entry) and draws DrawIndexedIndirect from the
record. mesh_emulation = 1 turns it on; mesh_emu_mb sizes the arena (160 MiB).
(cherry picked from commit efc43b177694d8f8ce5700fcf28d80e889a45589)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A dynamic resolution that keeps its targets at the largest size and draws the scene into part of them shows up as a
viewport smaller than the pass; one that resizes its targets shows up in the pass size. NX2NAVI_SCENE_SCALE=33 left
the handheld scene pass at 1440x810, so this tells which of the two the game does there.
(cherry picked from commit af7abe36b0b15c5a63b354d2870543987d1f4b1a)
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina streams its textures by detail level: while the player moves it registers about 32 pool slots with their next level every four or five frames. A pool refresh made 16 of them and wrote the stand-in into the set for the rest until its next round; the set is read as it is when its submission goes to the queue, so an object whose slot was among the rest could be drawn grey for a frame. A player's recording shows 1,525 such slots in 600 frames, each with its texture made later in the same frame. A slot whose entry in the set is a texture's view when it is looked up now has its texture made by that lookup, beside the count budget and the frame's creation time, 64 of them a present; pool_shown_first = 0 leaves them to the budget. The flight recorder also notes a slot that still had no picture when its submission ended.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
When the pool's entry of a slot goes from a texture's view to the stand-in, events.tsv gets a line with the slot and what its own texture was at that moment: finalized, released, superseded, overwritten, uploaded, its storage readable, held out. The set is written with update-after-bind, so every draw of the submission that samples the slot reads the stand-in from then on; the check at the marks' read-back comes a frame later and finds the slot resolved again.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The limit on what a frame's pool refreshes may spend creating textures was charged with the whole refresh, including its check of every entry the pools hold. In Kakariko that check takes 0.8 ms a submission, six submissions a frame, so most of the 6 ms was gone before a texture was made and the frame's later refreshes made none: 87 refreshes in 600 frames, with 1,090 slots left between them. The game moves about thirty textures to new storage every four or five frames there, and the ones a refresh left were on screen as their grey stand-ins for a frame; a player's recording shows three lamp posts turn grey for one frame that way. The limit now counts the time the lookups spend making entries and uploading them the first time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game's line width was dropped at the call and every line drawn 1 pixel wide; the game draws two lines a frame at 4.5 pixels into a 144x144 mask. The width is now recorded with the draw state and set as dynamic state for draws of the line topology class, held to the device's range. Only pipelines of that class list the new dynamic state, so the others keep their entries in the pipeline caches and the driver's. line_width = 0 draws every line 1 pixel wide as before.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The 8 ms and 16 ms tried in their place left fewer draws out in a scripted walk, but in play a frame that takes 10 to 14 ms longer felt worse to the player than one that is left out, in two sessions on the same install. The wait stays counted once for each pipeline, and a frame that has left a draw out already still waits for nothing more.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Such a frame is held back or shown without that draw whatever its other pipelines do, and with hundreds of pipelines new at once every frame of an area's load spent its whole 16 ms budget on waits that could not complete it: 49 frames over 25 ms in a walk with no pipeline recorded, against 17 with the earlier 3 ms waits. With the rule the same walk has 15, the picture stands still 15 times instead of 50, and 1 frame is shown incomplete instead of 22.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A draw that met a new pipeline waited 3 ms for its fast link, in every frame, which is just under what the link takes with the stage libraries in the driver's cache: in a first-visit session on a new install 66 of 87 such draws gave up at the end of the wait and their frame was held back. The wait is now 8 ms for each pipeline, counted from its first miss and shared by all its draws, and 16 ms for a frame, so a pipeline the driver has to compile costs one frame the wait and the frames after it nothing.
The pipeline list tool also takes the compute variants a game folder dispatched, which no pipeline record names and which were translated in the middle of play, and reads a list made before as one of its inputs.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The 1x1 images bound where a slot has no texture were only moved to GENERAL, so their content was undefined. A material that read its roughness map through one could see roughness near 0, and on Kakariko's distant cliffs at night the specular term reached 3392 in single pixels of the scene target, which bloom and the temporal upscaler spread into bright white spots. Sampled stand-ins now read as opaque mid grey (a middling roughness, a flat two-channel normal), storage stand-ins as zero.
With NX2NAVI_REPLAY_PIPE=1 (off by default) the submitting thread hands a group's chunks to the workers, takes chunks
of it itself until none is left to take, and goes on with the ops after the group in a new command buffer after the
chunks' places in the part (vk_sync_append_later), also into the next group's front pass.
Up to four groups are handed out and not in their part yet; their chunks wait in one queue in the order of the stream.
The submitting thread waits for them only where the order needs it: for room, before a part goes to the GPU, before
copies and texture or buffer clears, where DLAA's run or the contact shadows' hook acts, and where a lookup would make
a texture entry or take back a retired one (the op goes again afterwards, as a chunk's does in turn).
What the chunks read stays as the stream had it while the submitting thread runs ahead: uniform snapshot drops count
from their place in the stream, a chunk reads only the inline uniform updates before its group, the HDR present's
source goes by stream position, the texture pool set syncs under the chunks' lock, each group keeps its own render
conditions, occlusion segments and closed query slots, and the queries after a group's last report go into the next
segment made after it. A group's first chunk runs its pass hooks after the group before began its pass; turns wait
for every earlier chunk, of earlier groups too. Locks the chunks take, the submitting thread takes while it is behind.
Draws keep the sampled-texture descriptors they resolved per draw context and reuse them without the texture lock
while their slot is unchanged; the workers waited for that lock at nearly every draw. Texture lookups that change
nothing no longer wait for their turn. The perf line says where the submitting thread waited, what the chunks took,
and which texture lookups waited; NX2NAVI_GPU_TIMELINE also shows the chunks and the waits.
Off by default because it does not pay yet: in Hyrule Field with 3 workers it shortens the replay (11.5 against 12.1
ms a frame) but not the frame (49.2 against 49.6 fps in the same batch). The GPU gets a group's commands only once its
last chunk is recorded, so the main thread's wait for the GPU after the frame's first submission grew by 0.8 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Maxwell samples a texture by its own descriptor, so a 2D texture under a 3D sample gives its texel at (u, v). Vulkan
has no 3D view of a 2D image, and get_view found no view for such a binding: the draw sampled a stand-in. Such a
texture (plain colour, one sample, up to 1024 x 1024 texels) now gets a 3D image of one slice with all of its levels,
made in the upload batch and copied again when the texture was uploaded or drawn into since, or another layer is
asked for (vk_texture.c vk_texture_flat3d_locked). NX2NAVI_TEX_FLAT3D=0 gives the stand-in as before.
Seen in Kakariko: two of the game's 4 x 4 RGBA8 textures are sampled as 3D textures, and each got its copy; the runs
through eight reloads at 60 and 144 fps ended without errors.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Mesh draws ended a group and stayed on the submitting thread: 119 a frame in Hyrule Field at about 13 us each, and the
groups around them were cut short. They are recorded in the chunks now: the entries filled ahead for the indirect ones
are the draw context's, the ring index is taken atomically and the ring is made before the chunks record, each chunk
counts the ops that break a run of them on its own, and the lazy lookups of the mesh and shading-rate entry points store
their pointer before the flag that says it is there. With the mesh fallback, and while NX2NAVI_GPU_PASSES copies the
workgroup counts, they stay on the submitting thread.
A chunk's closed occlusion query slots go into a list of its own and into their segments once the group is done, in
chunk order, instead of under a lock per query. The per-object motion check decides alone per draw context (its
variant memo is per context) and takes its lock only to list a draw. The occlusion query ring has 16384 slots: the
chunks' blocks are sized to their draws, and with 4096 the ring came round to slots not reset yet.
The perf line splits the submitting thread's time with workers on: ops outside groups by kind, the front pass, its own
chunks and the wait for the others, and which ops ended the groups.
Hyrule Field, RX 7900 XT, 3440x1440, FSR 4 Native AA, same batch: standing 51.7 fps with 3 workers against 43.6 with
the workers off (replay 11.2 against 15.1 ms); along the field route 48.9 against 44.7. Screenshots standing and along
the route match the replay without workers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Samples-passed resets and reports ended most groups in Hyrule Field (the game reports twice without a reset there, so
counting stays on): the front pass now replays them in the order of the stream, makes each occlusion segment and
queues its completion callback in that order, and each worker follows the counting from its chunk's first op and adds
the queries it closes to the segment the stream gives them. Per-object motion takes a lock instead of waiting for the
earlier chunks: its list's order does not change the picture. The locks the chunks share are taken only inside a
chunk, as outside groups the submitting thread alone replays; taken always, they cost the replay about 1 ms a frame.
The perf line counts the draws by what ended their group.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>