A start that finds the pipeline cache written by another device or driver has nothing built, and everything was
compiled beside the game: an 8-core integrated GPU drew fewer than 600 frames in its first 11 minutes. Such a start
now waits on the "Preparing shaders" screen, with counts, for every recorded pipeline, for the compute pipelines on
every core at normal priority, and, when a sample says the driver's own cache lacks the prepared stage libraries, for
all of them on every core. The memory gate still holds for the builds, and the library builds write the preparation's
journal while the start waits, so a variant the driver's compiler dies on is skipped from the next start on.
boot-warm-owed.txt beside the caches names the GPU and driver: a start closed during the warm is followed by one that
goes on with it, three at most, and "done" keeps later starts ordinary while the cache file still carries the earlier
driver's header. When the boot stops waiting (prewarm_wait_ms, or a minute without progress) the builders step down
to the background's thread counts and idle priority. prewarm_full = 0 turns the warm off.
With nothing in the driver's cache the probe took 425 s on an RTX 5090 with 16 CPU threads: 87 s for 5,775 recorded
pipelines, 19 s for 4,075 compute pipelines and 317 s for 42,231 prepared variants.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
On a card with mesh shaders and 8 GiB of video memory or more the Game tab's switch cannot turn the mode on; it stays usable while the mode is on, to turn it off again. A player with every setting at its highest had it on on a GeForce RTX 5090, where the mode moved the sun shadow map and the scene depth to memory of their own and the ground's shadow became a dark patch with straight edges that turned with the camera.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The row sets low_end_gpu, read at start, and says what the mode turns on and that it was measured on one card; its text is there in the menu's four languages. The key is decided again once the settings file is read.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The heap limits were fixed at device creation, and only texture images looked at the budget. FidelityFX allocates
outside VMA (FSR 3.1 contexts, frame generation): 882 MiB of it with 4644 MiB of VMA's filled the 5526 MiB budget of
heap 0 while heap 2 had 1757 MiB free, and an upload submit failed with VK_ERROR_OUT_OF_DEVICE_MEMORY. vmaCreateImage,
vmaCreateBuffer and vmaAllocateMemory now go through vk_vma_budget.c, which leaves out a device-local heap whose
driver-reported use is within NX2NAVI_VRAM_RESERVE_MB (default 512) of its budget; a Lama patches row sets it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each emulated mesh draw ended the pass, ran its stages between four barriers and began the pass again: a pass of 20
emulated draws became 20 passes, and on an RX 580 6 to 7 ms of a frame's 30 ms of GPU time went to the gaps between
passes (gpu_passes in Kokiri Forest: 8.7-10 ms per frame outside the game's passes and dispatches, 6.3-7.7 ms of it in
273-306 gaps with barriers only; 71 emulated draws a frame, 36 of them indirect). Now the first emulated draw of a pass
ends the part there (vk_exec_split_now), so the pass begins a new part, and the stages of every emulated draw of that
pass, the indirect ones' ring entries included, go into the part's pre-pass command buffer (vk_sync_pre), which the
queue runs after the mirror prologue and before the part; the pass is not split again. NX2NAVI_MESH_EMU_BATCH=0 (Lama
patches: Mesh emulation before the pass) brings the split back.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Released textures kept, top texture levels left out, hot pools in system memory, the heap limit, the upload batch
limit, the kept ASTC buffer, mesh emulation and its arena and task records (greyed where the GPU has mesh shaders),
the overwritten-texture fix, the vector index fix, -O2 game code, pass times and the frame dump key. Each key gets a
row in the settings table; make_game.py reads guest_opt from nx2navi.ini when the environment does not set it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Choosing one of them while a temporal upscaler was set turned the upscaler off, and the picture fell back to bilinear scaling. vk_aa.c no longer keeps the game's SMAA while DLSS or FSR runs. The chosen pass replaces the game's composition as without them: in the native modes after the upscaler, and in the scaling modes before it. In the menu, a choice leaves the upscaler and frame generation alone, and the row notes that the upscaler's TAA runs too. Picking DLSS or FSR under Upscaling keeps the Anti-aliasing choice. The TAA entry, listed while no temporal mode is set, now sets FSR 4 Native AA where FSR 4 runs instead of forcing FSR 3.1. The overlay gets an Anti-aliasing line under Upscaling, for example "TAA + SMAA (Ultra)".
Checked on an RX 7900 XT in Hyrule Field with FSR 4.1 Native AA and Quality, and with FSR 3.1. The log has "the game's SMAA replaced by" smaa, off and fxaa while FSR 4.1.2 upscales, and the pictures are right.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Ocarina anti-aliases every frame with its own SMAA in three compute passes after the bloom composite. The new aa
setting (nx2navi.ini aa, the Screen tab's Anti-aliasing row) keeps that by default. off, fxaa and smaa leave out the
game's edge and weight passes and replace its composition with a pass of our own that writes the same square-rooted
RGB9E5 words into the scene target: a plain copy, an edge smoothing written here, or the SMAA reference implementation
with its area and search textures (MIT). taa is DLSS or FSR 3.1 at the scene's size, which the row sets through the
upscaler; while either runs, the game's SMAA stays whatever aa says. The game's passes are known by a hash of their
guest code. The shader build now also rebuilds a header when a file its source includes changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HDR row lists Off, RenoDX (the game's picture tone mapped to the display, the one fixed look) and Native (the game's own HDR, taken up at the next start), with the peak, game and HUD whites under either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR on is the game's scene through the observer-response mapper, anchored to the game's own mid grey and tone slope, with half of the hue bend of the game's clamp: the defaults the menu had. The tone mapper choice, the mid grey, the tone slope and its match, the hue clip, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare, hue, grade and gamma are gone from the menu, the settings table and the example ini; a file that still sets them works as before, the keys read by nothing and logging nothing. The menu's HDR row is Off and On, with the peak, game and HUD whites under it. The game's own HDR is still there for a file that sets hdr = native, and the row lists it only then. The luminance mapper and its grading code, which no setting reaches any more, are removed from the tonemap library, and the support buffer carries one vec4 for it.
The dark tones of a dark scene sat far above black: the present showed the game's sRGB-encoded picture as that encode decodes, linear near black, while the game is graded for a display of gamma about 2.2, and since the observer-response mapper became the default the 2.2 correction ran with the luminance mapper only. A scene value of 0.003 came out at 0.29 nits at a white of 350 nits, where a 2.2 display shows the game at 0.015. The present now always shows the picture as a 2.2 display would, and the tonemap aims its peak lower by that correction's inverse, so the brightest light still reaches the display's peak; the same value comes out at 0.017 nits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The Resolution row lists each picture height as the size of the game's shape at it (21:9: 2560 x 1080, 3440 x 1440, 4300 x 1800, ...; the window's own shape where the picture follows the window) and sets both the picture's height and the window outside fullscreen, which follows at once within the monitor; the picture's height takes effect after a restart as before, and Native leaves the window as it is. A build without the widescreen patch sets, which draws the game's own size, keeps the Window size row.
The Upscaling rows and the overlay name FSR 4 by the major and minor version of the provider the driver lists (AMD FSR 4.1 for 4.1.2), and AMD FSR 4 until the library was asked.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each upscaling mode made a context of its own (about 217 MiB of video memory for FSR 4 at 3440x1440, 50 to 70 ms each), up to six were kept beside FSR 3.1's, and three FSR 4 creations that failed in a row turned FSR 4 off for the run: the menu then showed FSR 3.1 and no longer listed FSR 4. A player's log had the third failure (error 3) right after stepping through the modes with ten contexts alive. A context now takes every render size up to its output size, which the API allows at each dispatch; a creation that fails frees every context not in use, FSR 3.1's idle ones too, and is tried again; FSR 3.1 serves the frames between tries two seconds apart; only four failures in a row turn FSR 4 off, and choosing it in the menu again tries it anew.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
No menu row sets coop_beta; it lives in nx2navi.ini under [coop] (NX2NAVI_COOP_BETA) and takes effect at once. Co-op
itself is unchanged: coop = 1 still runs a session with or without the tab. The notes and the co-op guide say how to
show the tab.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Brought onto the line with FSR 4, its frame generation and the debug menu. Where both sides had added to the same
place, both stay: the patch table keeps the pickup count and the free camera, the settings list keeps both sides'
names, the menu includes the co-op page and the debug menu, and the launcher builder takes the pipeline list and the
FSR 4 folder. Both sides had added the menu's typed-character event; one definition stays, with the window code that
passes characters outside the basic plane.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With it on, the game draws from a camera of the menu's instead of its own, in play and in cutscenes. The left stick moves it along its view and sideways, the right stick turns it, ZR and ZL raise and lower it, R makes it faster and L slower, and Link stands meanwhile; or the camera stays where it is and the pad plays the game.
It works inside the game's own camera update: a new patch site sends the instruction at which the frame's position, target and up vector are final to a host function, which replaces them for the camera that follows Link and the one the events direct, so the game draws, culls and loads detail for what the free camera sees. The camera of the interface's 3D models and the one the sound follows stay the game's. The set is off unless the menu switches it on. A teleport's arrival starts the free camera again from the game's view.
Tested in Hyrule Field with scripted stick input (turn, rise, strafe, with Link's position unchanged), with the pad playing while the camera stays, across a teleport to Kakariko Village, during the Kakariko arrival cutscene, and switched on by a click in the menu.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Teleport tab lists every area of the game with its named start positions, read from the player's own game files: the warp songs' pads, both sides of the loading zones and the boss rooms among them. A click changes area the way the game's own doors do: during a short event of the game that only waits, the menu reserves the next area and start position in the game's data and asks the game's sequence for the change, so the area unloads and loads as in play, a first visit's cutscene plays and a boss room starts its fight.
The Cutscenes tab lists the game's event scripts by name and starts one through the game's event manager.
Tested from Hyrule Field to Kakariko Village, the Forest Temple, Kokiri Forest in the child's time, the bottom of Lake Hylia, Volvagia's room, and the pads of two warp songs, four of them in one run, with Link walking afterwards; the Kakariko arrival cutscene started by name.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With debug_menu = 1 (off by default; the Game tab has the switch) F9 opens a panel on the left edge in the
performance overlay's look, with the game in view beside it. ui/menu.cpp lays it out in the settings menu's place,
so its input and the game's blocked pad are the menu's own. Typed characters now reach the menu for its text fields.
Flags: the game's 11,292 on/off flags are read from its game data manager, and a click changes one through the
game's own function on the game's thread at its pad read (runtime/debug_tools.c dbg_tick), so the game applies it
at its next update as it does its own changes. The game knows a flag by the hash of its name only; the names shown
are found in the player's own event flow files, hashed and matched when the panel first opens (2,250 of them from
915 files in 0.2 s), and none is kept in the code. World: Link's position, and a speed factor from 0.05 to 8 that
multiplies the step the runtime gives the game each frame (measured 0.50 at 0.5x). Memory: a search of the heap
for a value of 1, 2 or 4 bytes or a float (about 2 s), narrowed by equals, changed, unchanged, went up or went
down, with a value to set at a place or to hold there every frame.
Tested through the window's own messages: F9 opened it, a click on a flag set that flag in the game, text typed
into the filter narrowed the list, and F9 closed it; a scripted run set and held a value and put it back.
Teleporting, a free camera and starting cutscenes are not in it: writing Link's position, or every copy of it in
the heap, moved him back within three frames, so they need the game's own warp, scene-change and event functions.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The row showed AMD FSR 3.1 alone, and the frame generation of AMD's FSR SDK 2.4 could only be set in nx2navi.ini.
It is now listed after AMD FSR 3.1 as "AMD FSR 4 library" with the version the library runs on the card (3.1.6 on
an RX 7900 XT, the machine-learned 4.x on a Radeon RX 9000), where its libraries are there and FSR 4 runs. Choosing
it sets fsr4_fg and, since it generates only beside FSR 4 upscaling, FSR 4 as the upscaler; choosing AMD FSR 3.1
clears fsr4_fg. The performance overlay names the one whose swapchain is in place. In a test run the row went from
AMD FSR 3.1 to the new choice, back and to it again, and the swapchain followed each time.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
runtime/vk_ffx4.cpp loads amd_fidelityfx_loader_vk.dll from beside the executable and asks it which upscaler
versions the device can run. Where a 4.x version is listed (Radeon RX 6000, RX 7000 and RX 9000 cards with AMD's
driver 26.10.1 or newer) the menu's Upscaling row gains AMD FSR 4 Native AA, Quality, Balanced, Performance and
Ultra Performance, and fsr4 = 1 runs it in FSR 3.1's place with the same inputs. Its contexts are made with that
version asked for by its id and the provider is asked afterwards which version it runs, so no other upscaler can
be shown under the name. When a context or a dispatch fails, FSR 3.1 makes the frame, and after three failures
FSR 4 is off for the run. Each upscaler starts its history anew on the frame after a change from one to the other.
The setting is off by default and the Linux build compiles stubs.
On an RX 7900 XT (driver 26.10.1, 3440x1440, HDR) the library runs FSR 4.1.2: a context takes 54 ms to make and
217 MiB of video memory. Standing in Hyrule Field: Quality 47.8 fps where FSR 3.1 gives 51.5, Native AA 41.4.
Screenshots of 601 consecutive frames standing, 801 during a camera sweep, 701 each in Kakariko and the
graveyard, and 1,301 across changes between FSR 3.1 and FSR 4, their modes and off show no flicker that FSR 3.1
does not have, and it runs together with FSR 3.1 frame generation.
The SDK's API headers are in runtime/third_party/ffx_sdk, unmodified, with the licence. tools/make_kit.py and
tools/make_launcher.py take AMD's two signed libraries with --ffx4, and tools/make_game.py copies them beside the
game when the kit has both.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
mouse_mode = direct is the default, but on 1.1.1 it did nothing: only the 1.4.3 patch table had the sites, so the mouse always went through the stick emulation, which gives no turn at slow mouse speeds and tops out at about 107 degrees a second. The 1.1.1 table now has the set mouse_direct (on by default): at main+0x37c45c, where the camera's input update holds the processed stick in s1 and s0, a host call performs the displaced store and adds the raw mouse counts to both, so the mouse meets no dead zone and no curve; at main+0x37c4f0 a second call clears the idle bit for an update the mouse moved in. The counts are divided by the frames the game steps per update and by the stick camera speed, so the same hand movement turns the same angle at every frame rate. The Controls tab gets the mouse mode and mouse sensitivity rows, and mouse_mode = stick or NX2NAVI_MOUSE_DIRECT_PATCH=0 gives the old behaviour.
Checked here: the generator lifts the 1.1.1 game with the two sites (it compares each site's original word), the lifted game compiles and links with the runtime, and tests/mouse_direct_check.py passes its 1.1.1 harness (register contract, displaced store and load, equal turn at every frame rate and stick speed, the reset pause, capture and mode). Not checked here: the game was not run, so aiming with the mouse was not tried, and the differential tests against Unicorn were not run because no Python on this PC has Unicorn. The contributor measured 0.0800 degrees per count on both axes in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit bb8fecfbe43517006eafd7be9c22e8dbe9601de7)
Without the other players drawn in the world, which are unfinished. No relay address is built in, and with co-op off nothing opens a socket. Built on Windows and tested against a relay on this PC only; two games in one room and any real network have not been tried.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The walk key (walk_key, walk_scale) works and the settings example says the Controls tab sets both, but the tab had no row for either: the row's function was left without a caller, and a player asked for a walk key because he could not find one. Walk key and Walk scale are back under the analog stick rows, with the texts that were already there, and the guide names the setting. The second half of the contributor's change, a toggle mode, is not taken: it is a new feature that nobody has pressed a key against on Windows.
Built; the rows were not looked at in the menu, since no game could be started.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 02fab940a1bb79d8867f5e764ee597ea8eb662e8)
Each player keeps their own game and save. One player makes a room, the others join it with its secret, and story flags and, by the room's rules, items, songs, quest items, small keys (a shared pool), rupees and ammunition reach every save. The layer is a host thread with one UDP socket to a relay the players run themselves (tools/coop_relay.py, Python's standard library only); the messages between the players are sealed with a key from the room's secret (XChaCha20-Poly1305, Monocypher 4.0.2 vendored with its licence and a row in THIRD_PARTY_NOTICES.md), every change is signed by the player who made it, a player accepts a room by its members' keys and the key of its rules, the save is copied to coop-backup before anything is applied, and values are set through the game's own routines between frames. The Co-op tab makes, joins, accepts, removes and leaves, and the menu takes typed text for the name, the relay and the secret. This is the contributor's pull request #518 on this line.
Nothing reaches the network while co-op is off: the socket is opened, and the relay's name looked up, only after co-op is on, a relay is set and a room is made or joined. There is no default relay.
Left out of the pull request: the other players drawn in the world (the "puppets") with the copied engine they need. They were unfinished, added two patch sites to the game's per-frame update that could not be put through the differential tests here, and their file helpers clashed with the ones this line already has. So no position is sent: the POS message's codec stays, nothing sends it.
Changed against the pull request:
- The menu's test hook drives the Co-op tab only when it comes from the environment. From nx2navi.ini it could turn co-op on, join a room and accept its offer.
- The log's label for a room is hashed from the secret instead of being its first three characters.
- A game that has not saved yet has no save to copy, and takes nothing from the room until it has saved once; that used to count as a copy made.
- A PING's token no longer carries the PC's uptime.
- On Windows the maker's key file and its folder get an access list with the player's account alone.
- The tests that link the platform layer get the socket library, and the save test a stand-in for the title screen's hook.
Checked on Windows, where the pull request had never been compiled: the runtime builds and links; --probe-coop passes (sockets on 127.0.0.1, the codec against its byte vectors, a fuzz of every parser, two sessions through a hostile mock relay, a relay restart, the sync engine); tests/coop_relay_test.py passes its 61 tests, with the probe through the real relay on 127.0.0.1 at 0 and 30 % loss; tests/coop_page_check.py passes and its deliberate fault fails 48 checks. Not checked: two games in one room (one game runs at a time here), any real network, the tab in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The two sides both made the wait after a frame's first submission cover the write-backs under shadow storage; the rule is kept in one place, vk_sync_wb_split.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The HDR tonemap gains a mapper built on a finite cone response in LMS: scene grey 0.18 lands where the game's curve puts it and rises through it with the slope of the game's curve, and the hue bend of the game's clamp is given back to bright colours. It takes the scene before the game's exposure gain and the gain itself, which the splice now finds in the game's shader. The luminance mapper stays selectable and the game's own curve stays the third choice. The mapper fits the Rec. 709 gamut here, as the game's scene target holds no negative component. New settings: the tone mapper's mid grey, tone slope match, tone slope and hue clip emulation. The gamma correction on the present applies with the luminance mapper only.
Not part of this: eye adaptation, the anti-aliasing and reconstruction shaders, bloom and local exposure sliders, the output colour space choice and a 16-bit float scene target. Checked by build and numerically against the source of the port; the picture on an HDR display has not been judged. THIRD_PARTY_NOTICES.md names the source.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The action prompt at the top right of the HUD draws the four face buttons as a diamond in the console's places: A right, B bottom, X top, Y left. Under pad_layout = xbox, playstation or auto the A action is the bottom button, yet the diamond kept A on the right, so the prompt pointed at the wrong button. At start the runtime now edits the prompt's layout in the shared interface archive for such a layout (the buttons, the dots and the lit crosses move, and the bubbles of X and Y flip) and serves the result from the profile folder; with nintendo, the default, nothing is changed. Every field is found and checked before anything is written, so a layout a mod changed is left as it is, and the archive is packed again with the game's own dictionary at the same unpacked size. One SARC reader and dictionary lookup now serve this, the camera pack and the menu's assets. When the layout changes, the menu's Restart counts the diamond.
tests/action_prompt_check.py passes without game files and on the game's own archive (4 copies, 208 fields, 13 ms at start).
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
When Streamline loaded but DLSS Frame Generation was not available, the menu's row read "in use: off, needs an RTX 40 GPU or newer", also on an RTX 5080: the same check fails when the plugin did not load or a function it needs is missing. The row now points to the dlssg lines of the log, where the bridge says whether the plugin loaded and which of its functions it found, and then asks Streamline for its support result on the selected Vulkan device and logs it by name. The query is an optional export, so a bridge DLL of an earlier build keeps working.
The runtime and the bridge (tools/build_dlssg.py, MSVC, Streamline's headers) both build here. The failing case itself was not reproduced: on this RTX 5090 frame generation is available.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A player on an AMD card reported crashes in fights and that a line added to nx2navi.ini cured them. That line, async_compute = 1, is no setting of the game, and neither are two more in the same file; the one line of the file that changes how memory reaches the GPU is wb_lazy = 0. A second report, an RX 6600 on 0.7.1, lost its device 3.5 minutes into play with the lazy write-back on. Neither proves it the cause: the player changed several lines at once and sent no log, the RX 6600's last pass mark is inside a draw pass and not a fetch, cards with 8 GB lost their device the same way on NVIDIA before the lazy write-back existed, and reading the fault handler, the fetch, the arming and the buffers' lifetimes found no failure path. What depends on the driver and cannot be checked without the card: pages of guest memory are inaccessible while a host-pointer import of them is bound and written by the GPU, and Vulkan calls run inside the access-fault handler.
The default is now decided once the driver is known (wb_lazy_choice.h, vk_memory.c vk_mem_lazy_decide): on under Windows as before, except on AMD's driver branch for RDNA 1 and 2, which none of us has run it on; AMD's driver for RDNA 3 and newer keeps it on, since builds with that default were measured on an RX 7900 XT. What the player sets wins everywhere, and one line at start says the choice and its reason. On those cards open areas run at the 0.7.0 frame rate again (on an RTX 5090 that was 65 fps against 90 in Hyrule Field; not measured on AMD). tests/wb_lazy_check.c checks the choice by platform, driver and setting without a GPU.
For reports of this kind the log now holds what was missing. At start: every setting nx2navi.ini sets, and in one line the keys that are no settings of this version and do nothing; the settings menu shows those in its bottom row. At a fatal error or a crash: one line with the card, its driver, the memory mode, the lazy write-back with its reason, armed ranges, fetches so far and a fetch in progress, and the texture detail (dispatch.c rt_fatal_note_add, vk_device.c fatal_note), since a report is often the end of a log alone.
--probe-cfg loads the player's file: the three lines are named, and the menu's save keeps them and every other line it does not change byte for byte. Nothing here ran on an AMD card, and no fatal error was provoked to read the new line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A player's AppImage build of 0.7.1 stopped in its compile step after eight minutes of RomFS work: four
files did not compile, because the kit builds with the system's compiler and headers and theirs were
older than the runtime needs. vk_pipeline.c and vk_device.c name VK_KHR_pipeline_binary,
VK_KHR_dynamic_rendering_local_read and VK_KHR_shader_maximal_reconvergence, which their Vulkan headers
did not declare, and ui/menu.cpp takes its font in with #embed, which clang has from version 19.
- Vulkan headers: tools/vulkan_pin.py holds the release the other builds use (1.4.363, the archive and
hash tools/make_release_linux.py already pinned, which now reads them from there). The AppImage carries
its C headers in toolchain/vulkan-headers and builds against them whatever the system has; a kit or a
source checkout uses the system's when they are at least that release and fetches the pinned ones
otherwise (build_game.py vulkan_include). Their folder goes first on the include path of the runtime's
sources only, so the lifted code's objects keep their keys, and a runtime object compiled before
against the system's headers is taken over instead of compiled again. AppRun no longer asks for the
system's Vulkan headers.
- #embed: tools/build_shaders.py also writes the font's bytes as runtime/ui/roboto_ttf.h (ignored by git,
carried by a kit), and menu.cpp includes that where the compiler has no __has_embed. With #embed
nothing changes.
- Before its long steps a Linux build that will compile now checks every runtime source that needs no
header of the install with the compile step's own command (clang -fsyntax-only) and links an empty
program against the game's libraries (make_game.py preflight): an old compiler, an old header or a
missing development package stops it in the first seconds with the compiler's own errors. A failed
compile names every file that failed, not only the three whose errors it prints.
Checked on Windows: tests/launcher_test.py passes with four new tests (117); the header of bytes and
#embed give the same 162,588 bytes, and both branches of menu.cpp compile; the early check passes on the
Windows file set with clang 23 and stops on files made to fail; the 34 local headers of release 363 are
the upstream tag's files by git blob id. Not run: anything on Linux, the pinned archive's download, a
compiler older than 23.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The limit counted the frames on screen, so the game was paced at the limit over frame generation's multiplier: 60 at 4x drew 15 frames a second, and each step up of the multiplier took drawn frames away. Now a limit of 60 at 4x is 60 drawn and 240 shown. Only the display choice still counts the screen's frames, since a frame past the monitor's refresh is never seen, and with no limit set the default is 60 drawn rather than the monitor's rate.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The user asked for this once the flicker fix was measured. The single-frame flicker that kept it off in 0.7.0 came from frames drawn before the game's signal that their data was written, which the previous commit fixes; the lazy write-back only made the frames come faster, so the signal fell into the replay more often. wb_lazy = 0 in nx2navi.ini still turns it off, and an ini that already holds the key keeps its value. Elsewhere than Windows the default stays 0, as its fetch inside the access-fault handler has never run there.
Measured on the build of the previous commit, 1,800 presented frames a run, standing in Hyrule Field by day with DLSS Performance, frame generation 4x and HDR. With the lazy write-back on and eight busy threads beside the game: 38 and 0 single-frame spikes with the fix switched off (408 and 44 frames whose signal came during the replay), 0 and 0 with it on (667 and 724 such frames). With it off and the same load: 0 spikes in four runs, two with the fix and two without, 86 to 140 such frames each. Without load, one run each: 88.5 frames a second with the fix against 93.3 without it with the lazy write-back on (GPU 7.2 against 6.8 ms a frame, 6.53 against 6.48 submissions a frame), 71.0 against 65.6 with it off, so the fix's cost is inside the run-to-run spread; every run ended cleanly without a fatal error. This build was started once with no setting anywhere: the lazy write-back was on, and the Screen tab shows no row for it.
Not measured: play by hand with the lazy write-back on and the fix (the user's sessions so far ran with it off), other areas than Hyrule Field, and more than one run for the frame rates.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
One conflict, in the build kit's notes, which keep both the shader cache item and the Texture detail text.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The row offers Automatic, Full, Reduced and Low, names the level Automatic picks on this card, and notes that a change takes effect after a restart.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A setting read at the start showed "after restart" under its value always. The values the game started with are now
kept (cfg.c start_values), a row shows the note only while its value differs from them, and the Restart button counts
the settings that wait, the upscaler, frame generation and HDR among them. A value the environment sets never waits.
--probe-cfg checks the count.
From pull request #377 by mooki000. Three conflicts in the menu resolved against the frame generation rows that came
in since: the upscaling row keeps its description by what can load, and the frame generation restart test knows both
ways NVIDIA's runs.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Eighteen commits, one per Linux pull request that was not in yet: the build fix for a source checkout, NVIDIA's shader
disk cache only with NVIDIA's driver, tools/run_game.py for a Linux game folder, a memory limit the low-memory handling
can read, the recording thread's core on Linux, shadow storage on Linux and Proton, the Steam Deck profile and prompts,
FSR 3.1 offered only where its library loads, DLSS frame generation through NGX on Linux, the AppImage with its window
and its workflow, and the processor level from /proc/cpuinfo. Two conflicts: the settings table keeps the area-load
settings under the new comment, and the example file keeps the lazy write-back as off by default and adds that it
stays off with shadow storage.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
With it on, single frames come out with the whole scene lit differently (brighter, shadows off). The flight recorder's
thumbnails of 1,800 presents standing in Hyrule Field show none with it off in every run, and with it on 43 to 181
while four other threads keep the CPU busy (10 to 97 in earlier runs, 0 on an idle machine); the cause is not found.
Two candidate fixes (arming only against a sync whose copies were handed over, and snapshots waiting for GPU writes in
flight) did not change the count, and fetching at every release made it far worse.
So wb_lazy is 0 unless set, on every platform (mem_init loses its special case), and the Screen tab has the row
Experimental FPS boost for it on Windows, with its text in the four menu languages; like every setting read at the
start it notes "after restart". The 0.7.0 notes describe it as experimental and off, say about 1.6 GiB for the video
memory a full shader cache no longer holds (2,484 to 846 MiB at the title screen in the measured run), and list the
two fixes before this one.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The Controls tab's Button prompts row and nx2navi.ini take steamdeck: the Deck's own labels in the game's
text, action prompt and ocarina notes, which are A B X Y where an Xbox pad has them, L1 R1 L2 R2 and L3 R3,
Menu and View. The style is drawn by tools/pad_prompts.py like the others, into romfs-patches-steamdeck
and romfs-patches-steamdeck-label, and every build with button art writes them.
Pull request #107 by loteran asked for PlayStation and Steam Deck prompts; it was closed, and the tree
took the PlayStation half in another form, drawn from button art instead of redrawn font glyphs. This is
the Steam Deck half in that form, written here: the art has no Deck style, so its entry in
tools/prompt_art.py names the Xbox pictures for the face buttons, Menu, View, the d-pad and the sticks
and the PlayStation pictures for the shoulders and stick clicks. It needs four pictures of the Xbox set
that no other style used (the white letters on a light button, for the ocarina's notes); a release made
with --prompt-art copies them with the rest.
The Windows files compile and tests/launcher_test.py passes, with the prompts step's test following the
number of folders (seven now); every picture the style names is in the art used for releases. The style
was not drawn here (that needs the game's font), and --probe-cfg, which has a new check, was not run.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
DLSS Frame Generation went through Streamline, which only the Windows build has, so framegen = dlss did
nothing on Linux. There it now calls NGX's frame generation feature directly (vk_dlaa.c vk_ngxfg_*), with
the depth, motion vectors, jitter, camera and HUD-less picture the Streamline path gets. With it on, each
frame is composed into an image of its own instead of a swapchain image, the generated frames are made at
the end of the frame's command buffer, and a presenter thread shows them and then the rendered frame, each
copied into a swapchain image it acquires itself, spaced over the time between rendered frames
(gfx_present.c ng_*). fg_mult is the multiplier: 2 to 6, or dynamic for only the frames the display's
refresh rate needs. NVIDIA's libnvidia-ngx-dlssg.so.<version> goes beside the game; it is not in the
repository or any kit.
Pull request #124 by spidercraft. Its base was the present path of 0.5, so it is ported by hand:
- taken as written: the NGX calls and the presenter (the block is lifted from the pull request's diff);
- wired again into present_image, create_swapchain, the output rate and the HUD-less picture as they
are now, with every new branch behind vk_ngxfg_wanted, which is 0 in the Windows build: the code is
compiled there and never reached;
- added: frame generation's feature and parameters are released before NGX shuts down, the presenter's
images, semaphores and command pool go when the device is released and are made again for a new one,
and a failed submit on this path settles its fence without an acquire semaphore;
- the menu: the Frame generation row follows the setting at once on Linux and says "after restart" only
when the game started without DLSS upscaling; the multiplier row lists what the GPU allows and Dynamic;
- the overlay row of the pull request it builds on (#123) is not part of this.
It touches vk_dlaa.c, which another session is changing: one field in N, the FG state after it, one FN
line, the instance extension query, the capability read in vk_dlaa_init, the release, and a block appended
at the end.
Known gap, as in the pull request: on this path fps_limit counts the frames the game draws. The Windows
files compile without new warnings; nothing was run, and the Linux path is not compiled here.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
On Linux the Screen tab listed the five FSR 3.1 upscaling modes and AMD's frame generation, but only the
Windows build loads amd_fidelityfx_vk.dll: a player who picked a mode got the scene at the mode's share of
the picture with nothing to scale it back up. vk_ffx_available answers from the load's result once it ran,
and before that from the library file being there, so the menu can ask every frame. Where it says no,
the menu lists neither, a mode that is still set shows "in use: off", the scene keeps the game's own
share (vk_dlaa_fsr3), frame generation keeps the plain swapchain with one log line, and the texts name
what does run.
Pull request #371 by mooki000, taken as it is; two hunks merged by hand (vk_fg_wanted, which now also
stays off after a failure, and a README line that had gained Texture filtering). It touches vk_dlaa.c,
which another session is changing: vk_dlaa_fsr3 gains the availability test and one log text changes.
On Windows the menu changes only where the DLL is missing. The Windows files compile; nothing was run.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
NX2NAVI_ANISO was read once, when the first sampler was made (vk_texture.c sampler_features), and make_sampler raised the level of the surface textures' samplers as it created them. Samplers are looked up by the game's parameters and live until shutdown, so a new level could only reach them after a restart, and the setting had no row in the menu.
The decision which samplers get the level moves from make_sampler into aniso_raised, and sampler_for puts the raised level into the sampler key, as it does with the DLSS texture bias. vk_sampler_aniso_live reads the setting again after a settings change, at each present beside vk_dlaa_frame's bias; on a new level it clears the slots' samplers and bumps the sampler generation, as vk_sampler_dlss_bias does, so the slots and the descriptor caches take samplers of the new level from the next draw. The old level's samplers stay until shutdown like every sampler. The setting is marked live in cfg.c, and the Screen tab gets a Texture filtering row (Game, 2x, 4x, 8x, 16x) with the description the catalog already had.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The menu test hook's shot of the Screen tab shows only its first screenful of rows, so rows further down (Upscaling, Frame generation) could not be pictured without input, and a hidden test window takes none. NX2NAVI_MENU_TEST_SET now accepts FOCUS=<key>, which calls opt_focus_key for that setting's row: the cursor goes to it and the page scrolls it into view when it is next drawn. It does not switch tabs.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
In the settings menu a click anywhere on a row stepped its setting to the next value, and the left arrow stood left of the value's text, so it moved whenever a value of another width came up: clicking the left arrow through a list landed on the row at the second click and stepped the other way. Each stepper now has its arrows in white frames at fixed places, the left one the width of the row's widest value from the right one, and the mouse changes the value on those frames only; a click on the rest of the row selects it. On and off rows have the same arrows. An arrow at the end of its values is drawn faint and does nothing, and a button held on an arrow repeats as a held key does. A, Enter and left and right work as before.
NX2NAVI_MENU_TEST_CLICK clicks rows by their setting's name during a menu test run. On an RX 7900 XT at 3232x1352 the arrows stepped the performance overlay one value a click and stopped at both ends, and clicks on the body of four rows changed nothing.
HDR between off and the tone mapper now follows the menu. The HDR path is set up at every start (vk_hdr_armed): the swapchain colour space and metadata extensions, the tonemap splice and the settings in the support buffer, with the spliced tonemap returning the game's own SDR result while the swapchain is SDR. A change of the setting makes the swapchain again in the other format. On the same card a run that started with HDR off went to an HDR10 swapchain and back, and one that started with HDR on went to SDR and back, with the picture right in each state. The game's native HDR still waits for a restart, as the game asks about the display once, and the row says so. NX2NAVI_HDR_LIVE = 0 leaves the HDR path out of a run that starts with HDR off.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>