An installed copy's warm list has 42,344 variants, 42,142 of them from shader-prepared.bin, and its 4,066 compute shaders are what the boot kept pipelines for. The comments and the settings text said the list grew with the play history; a copy with prepared shaders held the 2.3 GiB from its first boot. Comments, docs and the ini text only.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit ea984fe05b995c5dad1e0f49c5f44de9ee8f19b2)
The boot prebuild built the pipeline of every compute shader play ever recorded and kept all of them for the process. A pipeline that exists holds driver memory whether or not anything dispatches it: with a history of 4,066 compute shaders they held 2.3 GiB of device memory, and its share of the process's commit, from the title screen on (RTX 5090, NVIDIA 621.01), while a boot into the first village dispatched 95 of them.
The boot now keeps the pipelines of the 512 compute shaders dispatched most recently (compute-used.bin next to pipeline-keys.bin records which run last dispatched each; the setting is compute_keep, with "all" for the earlier behaviour). Every other one is still built at boot, so that the pipeline cache holds it after an update or a driver update, but destroyed at once, and created from the cache at its first dispatch. A dispatch that comes while such a build runs gets that build's pipeline.
Each boot stage now logs the device memory and the process commit it leaves ("mem: boot stage"), and the log says what the first dispatches cost. nx2navi.exe --probe-prewarm runs these stages without the game from the caches next to the executable and times first dispatches of pipelines the boot did not keep: 256 of them took 0.19 ms on average and 3 ms at most, all read from the pipeline cache file, and 372 pipelines built and destroyed at boot left the device memory where it was.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 16a796d623686bca5304eaf1b29981247453a413)
The game's allocator hands out pool addresses that climb through the 64 GiB alias region, and a block of the table, once given to a 16 MiB range, stayed with it for good: after 16 GiB of ranges ever mapped the table logged "out of L2 blocks", and every pool created from then on stayed out of it, so shaders read zeros through pointers into it (foliage, instance and light data) until the game was started again. A block whose last page is unmapped now leaves its range at once and serves another once the GPU is past the submissions that could still read the old entry, as a record does; a range mapped again while its block waits takes that block back. A range that finds no block no longer ends the mapping of the ranges after it, and the log line says how many blocks are in use and waiting.
tests\gpa_check.py builds vk_gpa.c against stand-ins for the allocator, the device and the completion queue and reads the table as a shader does. On the table as it was, its climbing pools read zeros.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The six schemes were named after places in the game. They are now Forest, Volcano, Lake, Desert, Temple and Shadow, in the same order and colours, and their ids in launcher.json follow (forest is the default). A launcher.json that names one of the old ids gets the default scheme, as with any name it does not know.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A new launcher.json starts with sounds at low instead of off, and a value the file cannot hold falls back to low too (launcher/ui/sound.py DEFAULT_LEVEL). The player can still pick Off, Medium or High in Customize Launcher. The sounds are still only the game's select and back sounds, read from the player's own game.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
NVIDIA's Linux driver compiles into a disk cache in ~/.cache/nvidia, shared with every program, and a process adds at most
1 GiB to it (__GL_SHADER_DISK_CACHE_SIZE); a start that finds more than that in several files deletes the later ones.
nx2navi.exe --prepare-shaders builds the 42,142 variants of game 1.1.1 in one process, about 1.5 GB: on the default limit it
stored about 30,700 of them, and the first start after the preparation compiled the rest (and the pipelines built from
them) again.
Unless the environment sets them, the game now points __GL_SHADER_DISK_CACHE_PATH at nvidia-cache beside the exe (made
here, the driver only makes GLCache inside it) and __GL_SHADER_DISK_CACHE_SIZE at 8 GiB before its first Vulkan call, as it
does for Mesa's cache. The docs name both.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
NX2NAVI_ANISO was read once, when the first sampler was made (vk_texture.c sampler_features), and make_sampler raised the level of the surface textures' samplers as it created them. Samplers are looked up by the game's parameters and live until shutdown, so a new level could only reach them after a restart, and the setting had no row in the menu.
The decision which samplers get the level moves from make_sampler into aniso_raised, and sampler_for puts the raised level into the sampler key, as it does with the DLSS texture bias. vk_sampler_aniso_live reads the setting again after a settings change, at each present beside vk_dlaa_frame's bias; on a new level it clears the slots' samplers and bumps the sampler generation, as vk_sampler_dlss_bias does, so the slots and the descriptor caches take samplers of the new level from the next draw. The old level's samplers stay until shutdown like every sampler. The setting is marked live in cfg.c, and the Screen tab gets a Texture filtering row (Game, 2x, 4x, 8x, 16x) with the description the catalog already had.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The fifteen headers of SPIR-V words under runtime/ are no longer tracked. tools/build_shaders.py builds all of them:
the GLSL with glslc, the SPIR-V assembly with spirv-as, and the two shaders assembled in Python from their scripts.
build_game.py builds the missing and the stale ones before it compiles the runtime, and the build kit, the launcher
release and the AppImage build them before they copy runtime/, so a player's PC still needs no shader compiler.
git ignores the headers and check_content.py refuses a compiled shader in a commit. The headers built this way are
byte for byte the ones removed here. vk_mvobj_fs.h is now mvobj_fs_spv.h, named like the others.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The preparation builds every stage library once so the driver's disk cache holds it and a library a draw needs later takes under a millisecond. Turning dynamic vertex input off for AMD's RDNA 3 and newer driver changed the dynamic states every library lists, which gave each one another entry in the driver's cache, and nothing built them again: an update carried the prepared shaders over without the driver step. On an RX 7900 XT (26.10.1) all 42,142 prepared libraries were cold, 93 ms a vertex and 242 ms a fragment library on average. With no pipeline recorded, a walk through a village skipped 11,180 draws while their pipelines built and made 94 draws wait 5.5 s in all, four of them 1.0 to 2.0 s; a player's session log shows up to 114,834 draws skipped in 600 frames and 181 waits of 251 ms on average. Skipped ground and walls appear and disappear, and a skipped lighting pass is a black frame with the interface intact.
- The game checks the driver's cache at every start (vk_pipeline.c lw_start): a sample of the prepared fragment libraries is built, and when their median time says the cache is cold the whole prepared list is built into it again on idle-priority threads while the game runs. shader-warm.txt records a warm in progress, so the next start goes on with one a run ended, and stops the tries on a driver that does not keep the libraries. This also covers a driver update and a cache the driver emptied.
- An update that carries the prepared shaders over runs the game's --warm-shaders (tools/make_game.py warm_driver_cache): 11 s with the libraries there, about 8 minutes with all of them cold on that card.
- A draw whose pipeline is missing waits for its fast link from a budget of 6 ms a presented frame, 3 ms at most each (NX2NAVI_PIPE_LINK_MS), before it is skipped: with warm libraries the link is done within that.
- Full-screen draws wait from their 50 ms budget again instead of being skipped (NX2NAVI_PIPE_SKIP = any is the default; fullscreen stays selectable). With warm libraries the wait is a millisecond.
The same walk afterwards: libraries 0.3 and 0.7 ms on average, 1,605 draws skipped, 1,473 of them in the scene's first 600 frames and 8 to 80 in each 600 after, and 19 waits of 60 ms in all. First visits to four other saves (a mountain pass, the Lost Woods, Kokiri Forest, a river) waited 12 to 84 ms in all except the Lost Woods, where mesh shader pipelines, which have no stage libraries, and vertex libraries that need added outputs still compiled once: 23 waits, 2.1 s in all, the longest 776 ms.
The texture cache counted its waits in presents chosen at 60 a second: at 165 presents a second the 1800 that stood for thirty seconds were 11 s, so a released render target went sooner than meant and a texture out of view for 11 s was retired and showed its stand-in for some frames when it came back. The counts are now taken times the present rate over 60 (presents_for), and a texture is retired after two minutes without a sample instead of thirty seconds.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The cursor's sound played at every move of the pointer and cut the other two short, as one sound plays at a time: it is gone, and moving the cursor is silent. A choice, a changed switch, Play and the end of a build play the game's decide sound; going back and a failure play its cancel sound. The chimes the launcher made from sine tones are removed too, so every sound it plays is decoded from the player's own game into data/cache/sounds and it is silent until the game has been read. No sound file is in the repository, the release or the setup.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The launcher's sound effects were chimes made from sine tones. They are now the game's interface sounds, the ones its menus make for the cursor, a choice and going back: SE_Sys_Cursor00, SE_Sys_Do00 and SE_Sys_Cancel00, the files the in-game menu plays. The launcher decodes them from the player's built game or dump into data/cache/sounds (gamefiles.extract_sounds, a BWAV reader for PCM16 and DSP-ADPCM), beside the font it already reads that way, so no sound ships. The chimes stand in until the game has been read. The cursor's sound is a little under the others, as in the game's menu, and is left out for a quarter of a second after a choice, since one sound plays at a time and the pointer landing on a row of the next screen would cut the choice's sound short. Sounds stay off until the player picks a loudness.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The launcher's home screen has a Customize Launcher row. Color Scheme steps through six schemes (Kokiri Forest, the colours so far, Death Mountain, Zora's Domain, Gerudo Valley, Temple of Time and Shadow Temple): each is the first scheme with its woods, accents, backdrop and glow turned to other hues, so all keep the same light and dark steps and the same text. Background takes a picture file, cuts it to the window's shape and keeps a fitted copy in data/background.npy; Background Dimming darkens it and the panels turn a little see-through over it. Animations (on by default) make the cursor glide between rows, a new screen slide in, sparks drift over the backdrop and Navi bob in the title band; they move by the time that passed and stand still while the window is hidden. Sounds are short chimes made from sine tones, off until the player picks a loudness.
Redrawing in another scheme takes about a third of a second: the blurred masks and the noise, which no colour changes, are kept, and compositing onto a solid picture is a plain mix.
The selftest's screen capture passed window handles as plain ints, which failed for a handle above 2^31 and left some screens without their picture; its calls are typed now.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
In the settings menu a click anywhere on a row stepped its setting to the next value, and the left arrow stood left of the value's text, so it moved whenever a value of another width came up: clicking the left arrow through a list landed on the row at the second click and stepped the other way. Each stepper now has its arrows in white frames at fixed places, the left one the width of the row's widest value from the right one, and the mouse changes the value on those frames only; a click on the rest of the row selects it. On and off rows have the same arrows. An arrow at the end of its values is drawn faint and does nothing, and a button held on an arrow repeats as a held key does. A, Enter and left and right work as before.
NX2NAVI_MENU_TEST_CLICK clicks rows by their setting's name during a menu test run. On an RX 7900 XT at 3232x1352 the arrows stepped the performance overlay one value a click and stopped at both ends, and clicks on the body of four rows changed nothing.
HDR between off and the tone mapper now follows the menu. The HDR path is set up at every start (vk_hdr_armed): the swapchain colour space and metadata extensions, the tonemap splice and the settings in the support buffer, with the spliced tonemap returning the game's own SDR result while the swapchain is SDR. A change of the setting makes the swapchain again in the other format. On the same card a run that started with HDR off went to an HDR10 swapchain and back, and one that started with HDR on went to SDR and back, with the picture right in each state. The game's native HDR still waits for a restart, as the game asks about the display once, and the row says so. NX2NAVI_HDR_LIVE = 0 leaves the HDR path out of a run that starts with HDR off.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Above 60 fps players fell off moving platforms. The physics system takes its solver step count for a frame as
trunc(frames per update * 4 + 0.001): 4 at 60 fps and 8 at 30, the rates the game ships with, but 3 from 61 to 80
fps, 2 to 120, 1 to 240 (144 solver steps a second at 144 fps against 240 at 60), and 0 in a frame shorter than a
quarter of a 60 Hz frame. The solver skips its whole solve and sub-integration loop at 0, so such a frame resolves no
contact or friction and moves no rigid body. At a 240 fps limit, which "unlimited" paces at too, that was the frame
after every late one: the pacer keeps its phase, so the next display interval is shorter than the period.
The new patch set osolver rounds the count up, ceil(frames per update * 4 - 0.25): 4 and 8 as before, never fewer
steps a second than at 60 fps, at least 1. physics_steps = 0 gives the game's own count.
The step itself was the mean of the last five display intervals and changed with every frame: intervals of 5 and 30
ms in turn gave steps of 15 and 20 ms in turn, and one 60 ms frame at 200 fps took the step from 5 to 16 ms for five
frames. The game never saw a changing step on the console. The step is now the mean of the last 12 intervals without
the longest and the shortest, is the pacer's period when within 3% of it (at a 60 fps limit exactly one frame, every
frame), and repays the time the game was not given at up to a tenth of the step, so game time still follows the
clock. It is at least 1/480 s. step_steady = 0 gives the mean of five again. With trace = perf the fps lines show the
shortest and longest step and the time owed.
tests/frame_step_check.py drives frame_rate.c with made-up display times and the rest of the runtime stubbed.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
An update decided the lifted code was 0.5.0's generic build from any old-format entry in objects.json, and 0.5.0's
runtime objects stay there for good, so 0.5.0 to 0.6.0 to 0.6.1 recompiled the whole game for generic x86-64. Only
the lifted objects' entries decide now, and entries of objects a build no longer makes are dropped. Rebuild the Game
could not undo it: the compile step's key names no level, so the step read as done before; it now runs when the
recorded level is not this processor's. With Keep Build Cache off the lift is deleted but its key still matched, and
the next compile found nothing to compile: the lift runs again when the compile step will. The two reads of the
compiler's version no longer fail on bytes outside the system's code page.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Main brought the fixes of eleven pull requests (the texture pool set sealed when an early replay part is submitted, every location reflected in interface arrays, RGB9E5 texels recognised for integer storage views, the upscaler a frame started with kept, GPU pass timestamps without vendor breadcrumbs, the Linux build, window and NGX fixes), render targets released when drawn over at another address, the vertex layout kept in the pipeline on newer AMD drivers, and the upscaler choice read once per evaluation.
Four hunks conflicted and take both sides: pool_sync returns for a sealed set before the per-frame creation budget's clock (vk_exec_draw.c); make_module keeps the test line's early_ok argument and main's module hash (vk_pipeline.c); a texture taken back counts as sampled again and records how long it was away, and the texture line logs the disuse counters and the overwritten render targets (vk_texture.c).
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A replay part handed to the queue early kept reading the bindless pool set while later parts of the same submission wrote new entries into it. That updates descriptors a pending command buffer reads, and on RADV a texture whose memory was mapped after the part was submitted is absent from its page tables. This caused a gfxhub read fault in the 128x128 pass of the first world frame in Kokiri Forest.
Seal the set when a part goes, take another ring set at the next sync that has entries to write, and keep recording the same part while every other set belongs to the submission. Document the descriptor lifetime contract in maxwell.md 4.9.
Fixes#257.
On Linux the window ignored NX2NAVI_MONITOR (the log said it had no effect) and --list-monitors only printed that monitor selection is Win32-only. The SDL window now picks a monitor with the same rules as the Win32 one: auto (the system places it), primary, a 1-based index in listing order, or part of the monitor's name, ignoring case, the first match in list order winning. The monitors are SDL's displays; --list-monitors prints their index, name (the make and model, with the connector on Wayland and X11), pixel size and position, primary flag and display scale, then what NX2NAVI_MONITOR would pick, and the log says the same when the window opens.
The window is created centred on the chosen monitor and centred again at its final size, and that position also names the display the fullscreen setting covers, which is how a Wayland window, which a client cannot move, opens fullscreen on the chosen output. On Wayland a windowed window opens where the compositor puts it; the log says so once. With a chosen monitor, the size widescreen.c reads for fullscreen before the window exists is that monitor's.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The pool refresh runs before every draw that binds the pools, so its count budget of 16 creations held per draw, not
per submission. An area load in the 0.6.1.12 test made 4,925 entries (1.7 GB of uploads) in one 430 ms frame, and
2,018 in a 195 ms one. While slots were left over, every draw walked the whole table and looked each of them up again,
about 100 ms of the 430 ms frame in key hashing alone.
Once a frame's refreshes have taken pool_create_ms (default 6 ms; 0: no limit), they create nothing more until the next
frame, and skip the slots left earlier in the frame. The first refresh of each frame keeps its count budget. The slots
left keep their stand-in for a few frames during a large load.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This brings in the test branch up to the shader reads, not the texture eviction by disuse still in progress there:
- black frames: a released or taken-back texture keeps its content, and a new texture over a live one of another size gets the region both cover;
- the menu font atlas uploaded through the runtime's checked upload batch;
- the game held to 240 frames a second, which stops the quick menu's crash;
- the FSR 3.1 contexts evicted instead of turning FSR off after a few render scales;
- AMD frame generation kept off while NVIDIA's holds the device;
- less device memory held that only costs the system's commit;
- shaders read from the disk cache off the render thread past a small budget;
- the exit code 70 text;
- pull requests #260, #261, #270 and #271.
The tool lists in make_kit.py and make_launcher.py and the setting names in cfg.c take both sides: romfs_check.py and pack_shader_cache.py, FOG_CULL, SCENE_SHARE and GPA_TWIN_MAX_KB.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A profiled traversal session had 9 of its 16 worst hitches (100 to 500 ms) inside the render thread's shader lookup,
reading <key>.res.json and <key>.spv of shaders met for the first time: opening a loose file costs about 3 ms the first
time on Windows. get_async_one now reads in place while those reads stay within 1/8 of the wall time (2 ms at once);
past that three loader threads read them and the draws wait as for a translation. The perf line counts both.
The launcher's updates carry the shaders over and never packed the cache, which held 44,000 loose translations in the
test install. An update now packs it once it holds 1,000 loose ones, and the pack tool reads the loose files on 16
threads.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A dump can hold files whose first pages are zeros, with a container checksum that passes because the damage was packed along with them. The game then opens such a file over and over and gives up on whatever needs it: one damaged normal map left the Great Fairy Fountain without walls.
The game build's new last step, tools/romfs_check.py, decompresses every file of the game data once, in worker threads and never while the game runs, and writes romfs-check.json beside the game. A damaged texture gets a stand-in, an undamaged texture of the same kind renamed to it, in an ordinary mod folder the Mods menu can turn off, so the game can load what needs it. Other damaged files are reported, since only a clean dump restores them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The shaders step key hashed only the kit's bin/nx2navi_xlate.id, but the build takes the translator from the kit's bin/ or, in a source checkout, from build/xlate/ (xlate_source). From a source checkout, main() worked out the shaders key right after the compile step and stopped with a FileNotFoundError on bin/nx2navi_xlate.id before any shader was prepared.
The key now hashes the identity file beside the translator xlate_source finds, so a source checkout is keyed by build/xlate/nx2navi_xlate.id and a kit's key is unchanged. A build without a translator stops with the existing message that names tools/build_xlate.py. The prompts test kit gets a translator stand-in beside its identity file, and a new test covers a kit that has the translator only under build/xlate/.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The launcher's home has a Saves screen: Export Save writes NX2navi-save-<date>_<time>.zip into Downloads (or a chosen folder) with a manifest, the save the game would load next and, for a bug report, the game's latest log and nx2navi.ini, never a key file; Import a Save checks a zip's manifest, game, paths and CRCs, backs the current save up into the saves folder and replaces it while the game is not running. The game's Game tab has the same exports and an import that waits in profile/save-import and becomes the save at the next start, since the running game would write its progress back over a save replaced under it.
The zip code (runtime/save_zip.c) and the import at start are checked without game files by tests/save_zip_check.py and tests/save_share_check.py; the launcher side by its test suite.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With frame generation set to NVIDIA DLSS at the start, the device is made through Streamline's proxies. Switching the menu to AMD FSR 3.1 then made AMD's frame generation swapchain on that device at once, and NVIDIA's driver crashed with an access violation. vk_fg_wanted now stays false while Streamline's proxies are in use, so the switch takes effect at the next start, as the menu's Frame generation row already says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Each render and output size gets its own FSR 3.1 context, and there were six, never freed. Stepping through the render scales in the menu, plus the game's second scenes, used them up; the seventh size found no context, and FSR 3.1 went off for the rest of the run, leaving the game's own upscaler stand-in to show the picture. When all six are taken, the least recently used one not used in the last few calls is now destroyed once the GPU is idle, as DLSS's sizes already are.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Since the pacer divides the limit by frame generation's factor, the default limit of 60 held the game to 30, 20 or 15 rendered frames a second at 2x, 3x or 4x on any monitor, 15 at DLSS 4x on a 165 Hz one. While AMD's or NVIDIA's frame generation swapchain is in use and neither fps_limit nor the older fps60 = 0 is set, the limit is now the monitor's rate, as with fps_limit = display: 4x on 165 Hz draws about 41 and shows 165. A limit the player set is kept, and the menu's Frame rate limit row shows the display choice while this applies.
The mouse camera divided its input by the limit's frame ratio, which counts generated frames, so frame generation turned it faster by its factor; it now uses the rate the game draws at (frame_step_game_hz).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
make_launcher.py --dlssg needed --streamline, a Streamline SDK folder unpacked by hand, and make_kit.py could not
carry DLSS Frame Generation at all, so a game built from the kit always left it off. tools/streamline_pin.py now pins
the Streamline 2.14.16 SDK release (its archive's size and SHA-256, and the SHA-256 of each file the game loads):
without --streamline the scripts download the archive once, check it, keep only sl.interposer.dll, sl.common.dll,
sl.dlss_g.dll, sl.pcl.dll, sl.reflex.dll, nvngx_dlssg.dll and the two licence texts, each checked, and delete the
archive. A folder given with --streamline must hold the pinned files.
The bin/dlssg/ assembly moves from make_launcher.py into streamline_pin.place, so the release and the kit write the
same set and the same dlssg-NOTICE.txt: a kit made with --dlssg and the 0.6.0 release's nx2navi_dlssg.dll has a
bin/dlssg/ identical to the 0.6.0 release's, byte for byte. make_kit.py takes --dlssg [--streamline] like the
launcher. nx2navi_dlssg.dll itself still comes from tools/build_dlssg.py.
tests/launcher_test.py test_streamline_pin covers the extraction, the cache, refused archives and folders, and the
notice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
framegen_multiplier (2, 3 or 4, live) sets how many frames the display gets per rendered frame while NVIDIA DLSS frame generation runs, and a DLSS multiplier row under Frame generation in the Screen tab sets it. nx2navi_dlssg.dll now passes that count to Streamline and reports the GPU's limit (numFramesToGenerateMax) through a new optional export, nx2sl_frames_max; with an older DLL the game keeps to 2x. A value above the limit is clamped to it with a log line, and the menu lists only what the GPU and driver allow, with a note saying why the rest are missing. The Frame generation row now says "in use: off" and why when DLSS frame generation was set but does not run.
The pacer divides the frame limit by the multiplier in effect, as it already halved it for FSR 3.1, so the display gets the limit and VSync at the display's rate drops no generated frames; RivaTuner Statistics Server stays out while DLSS frame generation runs, since it counts generated frames. With DLSS 2x a limit of 60 now shows 60 on screen instead of 120.
nx2navi_dlssg.dll has to be rebuilt (tools/build_dlssg.py) for 3x and 4x.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Checked with the 0.6.0 launcher's own update path against a local copy of the 0.6.1 release: 552 of the game's 562 objects
were taken over, 10 compiled, the prepared shaders kept with the translator that made them named, done 0.2 minutes after
the download.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's shaders rely on IEEE NaN and infinity results: unordered comparisons compile to x > c || isnan(x), a
zero-length normalisation gives an infinity that a later test catches, integer masks travel through float selects,
and the translator's own NaN guards are isnan tests. Our SPIR-V never declared SignedZeroInfNanPreserve, which lets a
driver assume floats are never NaN or infinite. NVIDIA's driver keeps the IEEE results anyway; AMD's compilers do not
(issue #156: a NaN-bit select read as a signed integer gave 2^32; #41 and #110: black and white blocks on Navi and on
Link next to her). The player report: AMD GPUs draw Navi's sparkles but not her orb, whose light sits at her own
centre.
vk_pipeline.c spirv_nan_preserve now adds the capability, SPV_KHR_float_controls and the mode for 32-bit floats (16
and 64 where the module declares them and the driver can) to every game shader module. NX2NAVI_VK_NAN_PRESERVE: unset
on every driver except NVIDIA's own, 1 everywhere, 0 off. --selftest checks the rewrite; the rewritten modules of 600
translated game shaders pass spirv-val for Vulkan 1.3. Not yet seen on an AMD GPU.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Every shader cache key names the translator, so a release with a new translator had no cached translation at all:
the launcher re-translated about 42,000 programs before play, and play waited for any program not prepared.
The cache now lists the translator identities it holds translations of in shader-cache/identities.txt, newest first.
A shader the current translator has no translation of uses a previous one's, looked up with that identity mixed with
this machine's host options and read with the usual checks; it keeps that translation for the rest of the session, so
no pipeline is built twice. After the boot prewarm a background pass translates every stored input that has a previous
translator's entry again under the current one, on its own translator child at idle priority that waits while the
game translates. A program the new translator refuses keeps its old translation and is logged. Once the pass has gone
through every such input, the old entries of what it covered are dropped: loose files are deleted, and a pruned copy
of shader-cache.pack replaces the pack at the next start when the pack is still the one it was copied from.
--prepare-shaders still translates everything under the current translator. NX2NAVI_SHADER_CARRY=0 keeps the earlier
behaviour.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A check that finds a newer release (at start, then hourly while the launcher runs, also hidden during play) stages
it on a background-priority thread: the app into app/<version>, a new Python into app/<version>/python.staged rather
than python.next (which the stub would swap in under the running version), and staged.json written last to mark it
complete. Nothing is switched and nothing restarts. A failed staging is logged and tried again after the next check.
The staged release installs, through the existing switch, restart and ContinueUpdateJob path, when the launcher
starts and right after the game exits, never while a copy of the game runs. Install Updates Automatically (on by
default) can leave it to the Updates row instead. A version the stub rolled back from is not staged or installed by
itself again, prune keeps a staged release, and the Settings rows now fit the window with the new toggle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The game's Restart ends the process the launcher started and starts another. The launcher took that for the game ending: it came back over the game and forgot a game was running, so its Play could start a second copy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The commit census of the perf trace walked the address space on the presenting thread outside mem_census, which
brought back the hitch mem_census was added to remove; it now runs only with mem_census = 1. DLSS's output pass at
the mode's share fell back to no pass at all when the scene was not at that share (the first presents, a dynamic
resolution step): after such a frame the first pass wider than the scene is taken again for 120 frames. The launcher's
nx2navi.ini editor no longer rewrites a file it cannot read, keeps the byte order mark and bytes that are not UTF-8,
reads an empty line as the game does, and leaves no temporary file behind. The build kit carries the two modules
build_game.py imports on Linux, the Linux steps list the right packages and Python, and stale comments and notes are
corrected (Discord on by default, two prebuild threads, Enhanced HDR gone).
DLSS Frame Generation needs nx2navi_dlssg.dll, NVIDIA Streamline's runtime and nvngx_dlssg.dll beside the game, which
no release carried, so the menu offered it and the game turned it off. tools/make_launcher.py --dlssg and --streamline
put them with their licences and a notice in the release's bin/dlssg/, and tools/make_game.py place_dlssg copies the
whole set beside the game. THIRD_PARTY_NOTICES.md has the row; the notes and README say RTX 40 and 50.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
runtime/nx2navi.ico (the game window's title bar, taskbar button and Alt+Tab icon) is now the launcher's Navi, written
from launcher/ui/art.py navi_ico at the same ten sizes, in place of the Triforce. ocarina.exe is a console program
and the launcher has none, so Windows opened a console window titled with the exe's path beside the game;
winsys.start_game now passes CREATE_NO_WINDOW.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>