The platform layer calls the crash handler on every thread that faults, without waiting for the others
(win32.c crash_veh, crash_filter), and main.c crash_handler ended any second entry with plat_exit(71) at once.
So a second fault during the first report cut it after its first lines, together with its wait for a save Commit
(fs_save_crash_wait) and RivaTuner's restore; the audit's probe showed it in 3 of 3 runs. fatal_end had no guard
at all and none shared with the crash report: a crash during a FATAL's end wrote a whole crash report whose
"FATAL: access violation" became the log's last FATAL line (the one the launcher shows) and replaced code 70 with
71, and a FATAL during a crash report cut it with code 70.
dispatch.c rt_ending_enter is the one guard for both ends: the first caller reports and ends the process; the
same thread again (a failure inside its own report) ends at once with its own code (crash_handler keeps
plat_exit(71), fatal_end plat_terminate(code)); another thread waits in 10 ms sleeps, logging nothing since it
may hold the log queue's lock, until the process ends, and after 30 s ends it with 71 should the first report
hang. fatal_end calls it first; crash_handler calls it in place of its own busy flag.
Reproduced before the change by tests/fatal_exit_check.py's new cases, which failed on the old guards: two
faults at once (report lines 2 and 3 missing), a fault during rt_fatal (a crash report after the FATAL) and
rt_fatal during a crash report (exit 70, the report cut). They pass now, with the earlier cases and the static
check that crash_handler starts with the shared guard; the compile checks pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
dispatch.c fatal_end and vk_device.c lost_wait_exit ended with _Exit, which in the C runtime is ExitProcess: it
stops the other threads wherever they are and then runs every library's DLL_PROCESS_DETACH on the ending thread
(the audit's probes show the exe's TLS callback getting it after _Exit and not after TerminateProcess). That is
the detach plat_exit already avoids, after NGX's faulted once at the end of a clean run. After a FATAL such a
fault would enter the crash handler and replace code 70 or 72 with a crash report and code 71; after a device
loss a driver detach that hangs would hold the process for good, since ExitProcess had stopped the watchdog too.
The new platform plat_terminate ends the process with the code and nothing else (no exit hook, no stream flush:
the failing paths have written their lines and flushed). fatal_end calls it after its existing log sync and
flushes. lost_wait_exit tells its watchdog (spawned with a non-NULL argument) from the threads that stop there:
after LOST_EXIT_MS the watchdog alone writes "vk: the end of the run did not finish in 10 s; ending it" through
rt_log_sync's bounded trylocks, and the others end 2 s later only should the watchdog not have started. Exit
codes stay 70 and 72.
Not reproduced before the change (no detach fault on a fatal path has been seen). tests/fatal_exit_check.py
(new: dispatch.c and the platform layer with a TLS callback; rt_fatal ends with 70, its FATAL line and no detach
call, which it showed with _Exit; and statically, no _Exit in runtime outside the platform layer, and both ends
call plat_terminate) and the compile checks pass.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A lost device used to end the process from whichever submit or wait noticed it first, while the present only logged it
and went on and the other threads kept calling the driver. The completion thread could take the submissions' timeline
as reached and run the callbacks of submissions that never finished.
vk_device_lost_check now takes the result of every submit, present, acquire and wait. The first thread to see the loss
sets a flag, writes the report and ends the process as a fatal error does (the log written, a save commit under way
finished), with an exit code of its own; later threads stop in that call, and a watchdog ends the process after ten
seconds should the first thread hang. The replay, its submit, the uploads, the present and the lazy fetch read the flag
and return without touching the device. The completion thread asks the device with a call of its own before a new
value counts and runs no callback once the flag is set.
The executable's --probe-devlost and tests/device_lost_check.py check this without a lost device, and
device_lost_at in nx2navi.ini ends a real run the same way.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game's Commit returns once the commit is queued, so the game may already have reported the save as done while its thread still copied; ending then left an unfinished copy that the next start rolled back.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A player on an AMD card reported crashes in fights and that a line added to nx2navi.ini cured them. That line, async_compute = 1, is no setting of the game, and neither are two more in the same file; the one line of the file that changes how memory reaches the GPU is wb_lazy = 0. A second report, an RX 6600 on 0.7.1, lost its device 3.5 minutes into play with the lazy write-back on. Neither proves it the cause: the player changed several lines at once and sent no log, the RX 6600's last pass mark is inside a draw pass and not a fetch, cards with 8 GB lost their device the same way on NVIDIA before the lazy write-back existed, and reading the fault handler, the fetch, the arming and the buffers' lifetimes found no failure path. What depends on the driver and cannot be checked without the card: pages of guest memory are inaccessible while a host-pointer import of them is bound and written by the GPU, and Vulkan calls run inside the access-fault handler.
The default is now decided once the driver is known (wb_lazy_choice.h, vk_memory.c vk_mem_lazy_decide): on under Windows as before, except on AMD's driver branch for RDNA 1 and 2, which none of us has run it on; AMD's driver for RDNA 3 and newer keeps it on, since builds with that default were measured on an RX 7900 XT. What the player sets wins everywhere, and one line at start says the choice and its reason. On those cards open areas run at the 0.7.0 frame rate again (on an RTX 5090 that was 65 fps against 90 in Hyrule Field; not measured on AMD). tests/wb_lazy_check.c checks the choice by platform, driver and setting without a GPU.
For reports of this kind the log now holds what was missing. At start: every setting nx2navi.ini sets, and in one line the keys that are no settings of this version and do nothing; the settings menu shows those in its bottom row. At a fatal error or a crash: one line with the card, its driver, the memory mode, the lazy write-back with its reason, armed ranges, fetches so far and a fetch in progress, and the texture detail (dispatch.c rt_fatal_note_add, vk_device.c fatal_note), since a report is often the end of a log alone.
--probe-cfg loads the player's file: the three lines are named, and the menu's save keeps them and every other line it does not change byte for byte. Nothing here ran on an AMD card, and no fatal error was provoked to read the new line.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every log line was two writes on the thread that logged it, to stderr and to the log file. Such a write can stall for
tens or hundreds of milliseconds (a busy disk, a virus scanner, a console or a pipe that is slow to take it), and the
render thread logs too: a frame it spent in a write was a hitch with nothing else to show for it.
In a game run the lines now go into a queue that a log thread writes out in order (runtime/logq.c). A fatal error,
the crash report and the end of the process write the queue out on their own thread first and write their own lines
directly, so nothing is lost to an exit. A thread that finds the queue's lock held for long, or the queue full, writes
its line itself. NX2NAVI_LOG_ASYNC=0 writes every line where it is logged, as before.
Every write is timed in both modes: a "log: ... writes of the log took over 2 ms" line counts the slow ones, gives
the longest and says whose time they took.
tests/logq_check.py checks order and completeness with eight threads, a slow destination, a stopped destination with
the queue full, and the synchronous flush.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
- The mesh stage's storage table starts 0x90 bytes before the end of the 2 KiB constant bank, and all sixteen slots
were written: 0x6C bytes past a stack buffer on every mesh draw. It holds the nine slots that fit.
- The prebuilt runtime is compiled without AVX, so its preemption stub saved only XMM0-15 while the lifted code of
an AVX2 processor keeps data in the upper YMM halves, which the stub's callees may clear. Both bodies are built
now and the one for the processor is chosen at the start.
- After an FSR 3.1 frame generation error the window's swapchain was still AMD's object but went to the plain Vulkan
calls. Swapchain calls follow whose swapchain it is, and a failure takes it down as a switch in the menu does.
- A movie is paced at its own 60 fps under a lower limit too: at 40 fps it ended 25 s behind its sound.
- A lost device left the wait for an upload spinning for good; it ends the run with the device's report.
- The compute pipeline key had four bytes of padding that were hashed and compared, so a prebuilt pipeline could be
missed and built again.
- A thread's TLS pointer was published before the TLS was allocated, so the slot was always 0.
- A fatal exit puts RivaTuner Statistics Server's profile back, and an ini saved as UTF-16 is read.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>