Commit Graph

1131 Commits

Author SHA1 Message Date
chrg6
2820781fb7 Log the memory by owner every 3600 frames, and how often released textures come back.
Every VMA allocation is counted under the file that made it until it is freed, so the new "mem: by owner" line
splits the device-local memory the driver reports into textures (live, GPU-drawn, idle, released, released too
lately to drop), pools and VRAM mirrors, upscalers, replay buffers, uniform snapshots, the device address table,
the ASTC decoder, present and post-processing, headroom spares, the free space inside VMA's blocks and what VMA
never allocated. "mem: host" gives the host-visible allocations, the process's commit and working set and the
game's heap. "vk: released textures" counts take-backs by how long the texture was released and textures made
again after a drop by a bound or a pressure, with the drop's reason.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 23:21:17 -05:00
chrg6
4f80dbcbc2 Bring the 0.10.0 line's low-end replay default into the pull request intake. 2026-11-12 23:04:56 -05:00
chrg6
d64a9b689c Move the sprint button's stance host off the water ripples' patch page slot, and fix how presses and timings reach it.
The stance site called page +0xf50, which the 0.10.0 line gives the water ripples above 60 fps: the second
registration ends every 1.1.1 start with "registered twice", the sprint button off included. It calls +0xf30 now, and
the comments say which slots the other sets hold. The set's switch is NX2NAVI_SPRINT_BUTTON_PATCH, not a name another
open request uses for a set of its own.

The stand-still timings count 60 Hz frames (frame_step_frames), so a toggled sprint no longer ends on a short stop at
high frame rates. A press is decided at its start for its whole length: kept from the game and the sprint's when it
begins in gameplay (B: while Link moves), else the game's alone, so a held B is not handed to the game half way and a
B that closes the pause menu starts no sprint. A sprint switched off with the button setting does not come back by
itself, Link's state is read only where the memory is readable, and the row, nx2navi.ini.example and the controls
page say that B is the jump under the game's Swap Jump Controls and name the button without assuming the layout.
tests\sprint_check.py covers the press latch, the menu press, 240 fps and the switch-off.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:57:56 -05:00
kendo
aab082ff51 Say that the sprint button's B puts the weapon away when Link is not moving, not that it attacks. 2026-11-12 22:55:14 -05:00
kendo
54fa3bc0c7 Offer only L3 and the game's B button as sprint buttons, and name B as the Nintendo layout's bottom button. 2026-11-12 22:55:14 -05:00
kendo
0a4fe144c9 Run the sprint patch set only while a sprint button is chosen, and never switch it on over a start that kept it off. 2026-11-12 22:54:58 -05:00
kendo
6faf4bd7f5 Add a sprint button: a setting that makes Link sprint without rolling first, as a toggle or while held. 2026-11-12 22:54:58 -05:00
chrg6
f3856c8dca Ask for a reused compute request before its shader module is made, and report the reuse with the prebuild.
A compute warm request the same as one built before still made its shader module, with the SPIR-V fixes, pool rebind
and marks, before the reuse table answered; the table is now asked first, all of its key being known by then. The
table is cleared under its lock, the count of reused requests is in the prebuild's and the preparation's report
instead of a line at every autosave, and NX2NAVI_COMPUTE_WARM_REUSE is a known setting, so nx2navi.ini can set it
without an "unknown key" line.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:54:02 -05:00
automata.
9e23aec717 Reuse equivalent shader translation and compute preparation work 2026-11-12 22:53:00 -05:00
chrg6
6590f68f6e Check the driver's cache of stage libraries at normal priority, into the driver's cache only, and go on with a warm from where it stopped.
Taken from pull request 760 and redone on the line's check: the sample was built at below-normal priority as the
guest started beside the boot's background builds, and on an RTX 5080 (0.9.2) it read a warm cache as cold, a median
of 136 ms, after which 42,231 libraries were built again in 873 s although the driver had them. The sample is now built
at normal priority and into the driver's cache only, as the warm's workers build (a library our own pipeline cache
holds read fast whatever the driver had), and a sample that says cold is taken again 10 s later, except while the start
waits for the whole warm after a driver change, where cold is the expected answer. The thread goes back to below
normal afterwards only when the game runs beside it.

Two parts of the pull request are not taken. The third fastest of twelve called a cache warm when three libraries
were in it, which is the partly evicted cache the warm is for; the cache counts as warm when three quarters of the
sample are fast. A resumed warm was sampled and stamped done when it looked fast, which a warm cut off past a quarter
of the list would pass with the rest never built; it is not sampled, and goes on from the variant the earlier run
reached, which shader-warm.txt now keeps every 8,000 variants, instead of from the first variant again: the cause of
the warm at every start the pull request saw with sessions shorter than a warm.

Co-Authored-By: Leyukaka <45659323+Leyukaka@users.noreply.github.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:52:54 -05:00
chrg6
de3f10fe82 Keep the pipeline cache limit at 1024 MB at least, and fold the play file only with room left for the fold's save.
The RAM-based default gave 509 MB on a 16 GB machine, below the about 550 MB a full cache of the pipeline list reaches
on an NVIDIA card: with the limit kept on the write side the files would stop there and every pipeline past it would
compile again at every start, on the most common RAM size. The default is now RAM / 32 between 1024 and 4096 MB.

A fold was taken when the merged cache fitted the limit at the boot, but pipeline-cache.bin is written at the first
autosave, after the boot's builds have added to it. Past the limit that save was refused while the play file was
written over with the new run's pipelines, and what had been folded from it in memory was then in neither file. The
fold now needs a play file's worth of room (pipeline_cache_play_mb) under the limit, and the play file is not written
while a fold is not yet in pipeline-cache.bin.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:51:08 -05:00
Leyukaka
fe5bff8328 Keep the pipeline cache files under their limit when writing them, and set the limit from the RAM.
The limit was only checked when a file was read, all or nothing, so a run could write a file the next start then
dropped whole. On an RTX 5080 (0.9.2) pipeline-cache-play.bin reached 524.9 MB in one session and the next start began
empty; pipeline-cache.bin grows 14-28 MB at each fold and crosses 512 MB within a few sessions. Now a fold is made only
when its result fits, and a cache past the limit is not saved again, so the file keeps its last save under the limit.
Unset, the limit is the RAM / 32 between 512 and 4096 MB (512 on 16 GB as before, 2048 on 64 GB), which on that PC
took boot hits from 14 to 84 % and left no pipeline to background builds.

Taken into the 0.10.0 line with its conflicts resolved: the line had raised the limit to 1024 MB and says why in
the comment above cache_data_read, in nx2navi.ini.example and in AUDIT.md; those texts keep that reason and give the
RAM-based default, whose floor the next commit raises to match.
2026-11-12 22:50:53 -05:00
chrg6
de02ced989 Leave asynchronous replay off in the low-end GPU mode.
It can show a dark or flickering frame now and then, so the mode no longer turns it on with its other defaults. Its row under the mode's switch still turns it on for a player who wants it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:50:13 -05:00
chrg6
70c9935789 Give the movie timestamp sites a switch of their own, say what changes in a decoder stall, and keep the movie cap's reasons.
The two sites that count a movie's event frames from the shown picture's timestamp were part of the real-time step's
set, so the only way back to the old count also turned the step off. They are set omovie now, NX2NAVI_MOVIE_PTS
(movie_pts in nx2navi.ini), on by default.

The comment says what the new count changes at the default movie cap: nothing while the decoder keeps up; in a stall
the cues wait with the picture instead of going on with the soundtrack, and step by 2 or more when a picture is
dropped. The counter's reader, main+0x3b3ec10, hands it out as a float frame through a virtual call; its callers were
not traced, so whether a cue on a dropped picture's tick can be missed is said to be unknown, which is what the
switch is for.

The movie cap's comment keeps the measurements it rests on, the narration 2.4 times early and the fade at 65 s of 154
at 144 fps, with one sentence on the new sites. The new test is described in prose with what it does not cover,
instead of a row in the lifter's table.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:49:19 -05:00
automata.
feeb504bf4 Drive movie event timelines from the selected video picture timestamp 2026-11-12 22:48:34 -05:00
chrg6
2571e180c8 Check the texture pool's set against the device's descriptor limits, and name the slot a carried translation reads.
The larger pool asks for 655,360 sampled images in one set where 524,288 were asked before. The start now logs the
device's limits for one set and one stage next to that count, warns when the count is over them, and a refused
layout ends the start with the limits named instead of a bare failure.

The log line for a slot registered past the pool names both slots a shader reads instead: the pool's last entry, and
the last of the old length for a translation carried over from the translator before. The comments say what they say
without an issue number.

The translator's identity changes with this pool size: after the update every install translates its shaders again
in the background, the earlier translations serve meanwhile, and a shader gets the ground fix once it is translated.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 22:46:24 -05:00
Leyukaka
e0271c0298 Treat pool arrays of the old 32768 length as pool arrays, for translations carried over from the translator before.
After an update the game keeps the previous translator's translations until a background pass translates them again. Those still declare texture pool arrays of 32768, which spirv_pool_rebind no longer took for pool arrays once VK_POOL_TEX grew, so their textures were never bound and areas loaded with empty images. They now bind to the first 32768 entries of the larger binding.
2026-11-12 22:45:06 -05:00
Leyukaka
2388f1f581 Give the texture pool room for Ocarina's 33068 descriptors instead of 32768.
The game makes a texture pool of 33068 descriptors, and the translator clamped every pool handle to 32767, so the textures registered from 32768 up were drawn with whatever slot 32767 held, often an empty image: ground went see-through after an area load until the area was loaded again. VK_POOL_TEX and the translator's TexturePoolLength go to 40960, and a slot registered past it is logged once.
2026-11-12 22:45:06 -05:00
chrg6
3e323d1f94 Change and read a job's steps under one lock.
The worker, the thread that reads the build's output and the window all change a job while the window draws it. A
step could be read with a new state and the value before it, the output's lines could change while they were
copied, and the change counter was incremented without a lock although the window learns from it that the job
ended. Every change and the counter now take the job's lock, and the job screen and the command line copy the steps
under it.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
e0870b87b4 Resume a part file only for the file it was begun for.
A part left by a download of other bytes under the same name was resumed, and the result failed its sha256 check
as if the download were damaged. A note beside the part now names the file it belongs to by the expected sha256;
a part of another file is deleted with a log line and the download starts over, and the same file is still resumed
from another server.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
9dcd73eebc Refuse a mod archive that holds a name Windows cannot keep.
A file called after a device, ending in a dot or a space, or holding a colon was unpacked into the device, under
another name or as a hidden stream, and the game missed it without a word. On Windows the archive is now refused
with the file's name and the reason; elsewhere such names pass as before.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
8c32aedabb Refuse a game folder whose path leaves no room for the game's files.
Windows and the build tools stop at 260 characters for a file's whole path, and a built game needs up to 128 below
its folder. A deeper folder made the build stop in the middle with a file "not found"; Begin Installation and the
install job now refuse it first and name both lengths.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
0a85e33e0f Hold the game's profile lock while an import replaces the save.
The window asked whether the game runs before the player picked the save, so the game could start during the dialog
or during the backup's copy and mount a save that was half replaced. The import now takes profile/instance.lock as
the game does: a running game refuses it, and a game started in the middle is turned away by its own lock.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
d0e6cd695e Ask the disk for room before a download or an unpack starts.
A disk that filled in the middle ended a download after four tries with an error that named no cause, and an unpack
with half a folder. The rest of a download, the build tools with their unpacked size, an update's archive and a
mod's zip are now measured against the free space first, and the refusal says how much is needed and how much is
free; a disk that fills during a download is named as full at once.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
fe041188f5 Give a resumed download's progress the whole file's size as its total.
The total was "length + have or size or 0", which is the part file's size when a resumed answer names no length:
the bar ran past its end. It is now the expected size, else the server's length plus the part, else unknown.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
c5aee51601 Leave the game's settings file alone while the game runs.
The game and the launcher each read nx2navi.ini, change their own lines and put a new file in place, so of two
changes in the same moment the second dropped the first. The mods' switches already refused while the game runs;
the Discord Status switch of the Settings screen now does too, and says to use the game's menu.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
c5cb67645e Write the flight dump and the memory map through a temporary file and a rename.
The window's close ends the process under the detached threads, so a dump file the flight recorder's thread was
writing stayed cut short under its own name. Its three files are now written as .part and renamed when complete
(runtime/part_file.h, with a check that kills a writer in the middle), and the allocator's map goes through
plat_file_write_cached. The shader identities and the other cache files already went through an atomic write.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
cc0e2c4bf4 Say at the next start which job the launcher was stopped in.
A job that writes into the game folder leaves data/job-running.json while it runs and removes it when it ends. A
launcher closed or killed in the middle leaves it, and the next start logs it and tells the player which job did not
finish and that Rebuild the Game or Begin Installation goes on from the steps that were done.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
2a7fda9506 Put a picked mod together beside the mods folder and move it in once it is complete.
Add a Mod copied straight into the mods folder, so a copy that stopped halfway left a half mod there, switched on
at the game's next start. It now goes into a folder beside the mods folder and moves in with one rename; a failed or
interrupted copy removes what it made.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
3ca1541e0e Let one process work in a launcher folder at a time, and one job on the same thing.
The window already locked data/launcher.lock, but a second one closed without a word, the command line did not take
the lock, and nothing kept two jobs apart. The lock is now launcher/locks.py: the window, every command but check and
every job that changes files hold it, the one refused says who holds it, and a job names what it changes so that a
second one on the same thing fails before its first step.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:34:22 -05:00
chrg6
ec9dd522b1 Add texture compaction behind NX2NAVI_TEX_COMPACT, off by default.
With the setting on, textures no shader sampled for ten seconds are copied on the GPU out of the emptiest allocator
blocks into the holes of fuller ones, so the emptied blocks go back to the driver. A pass starts when the free space
inside the device-local blocks reaches NX2NAVI_TEX_COMPACT_MIN_MB (one block under VRAM pressure) and the block
table has blocks that hold nothing but such textures, with room elsewhere for what moves. It takes at most four
textures and NX2NAVI_TEX_COMPACT_FRAME_MB a frame, and none in a frame that loads an area, already made or uploaded
textures, or follows a long one. A released texture the size cap would drop is dropped instead of moved.

Only a texture whose image holds what the game's memory holds moves: uploaded, never written by the GPU, single
sampled, not depth. The entry takes the new image under the texture lock and its address generation moves, so every
slot, pool descriptor and memo resolves again. The old image and its views stay until the texture pool has taken
every set of its ring and the GPU is past the submissions recorded until then, as a retired texture's do.

Each pass logs what it moved and dropped, the blocks and bytes given back, and the time it took. A block emptied of
textures that the allocator keeps is left alone for ten minutes, and a pass that gave nothing back doubles the wait.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:33:29 -05:00
chrg6
d668a62854 Log how much of the allocator's blocks is holes, and how much of that a texture compaction could give back.
A log without the perf trace said nothing about the free space inside the allocator's device-local blocks, which the
driver counts as in use. Every 3600 frames (600 with the perf trace) a "mem: holes" line now gives the blocks and the
allocations in them, and for the memory type the textures use most the blocks that hold a texture, the textures and
VRAM mirrors in them, the blocks at most half full, and those of them that hold nothing but textures that could be
copied elsewhere or dropped: emptying those is the most a compaction could return.

The counting is runtime/vk_tex_compact.h, which also chooses the blocks to empty, with tests/tex_compact_check.py.
A texture entry keeps the block its memory lies in, so the table is built without asking the allocator per entry.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:33:29 -05:00
chrg6
f2a5800c1e Merge the stability pass's fixes for the points its review found.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>

# Conflicts:
#	runtime/cfg.c
2026-11-12 22:32:48 -05:00
chrg6
1a206434e0 Build the mesh pipelines' stage libraries ahead of their draws, at the preparation and at boot.
The preparation and the boot build the stage libraries of single shaders. A mesh pipeline's pre-rasterization
library needs its mesh stage and its task stage together, and its fragment shader library depends on what that mesh
stage leaves unwritten, so only a pipeline record names what they are made of.

Every listed mesh pipeline the preparation builds and every recorded one the boot queues now notes its two shader
libraries, each key once. The preparation builds them on every core after the listed pipelines and before the
pipeline cache is saved, inside the marker that covers a driver dying on a listed pipeline. The boot builds them on
one thread at idle priority beside the game, behind the memory gate, with the rest of the library prebuild
(lib_prebuild = 0 leaves it out). Each is destroyed once built, which leaves it in the pipeline caches and the
driver's own, as for the single shaders' libraries.

A mesh pipeline of known stages that a draw meets with other targets, another blend state or sample count then finds
its libraries in the caches and is linked, where it was compiled whole. The recorded and listed mesh pipelines are
still built whole ahead of play, also on a machine that leaves the rest of the shared list to its first draw.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:31:13 -05:00
chrg6
89ed3ffd17 Read ahead for mesh draws too, and let a mesh draw wait for its fast link like a vertex draw.
The look-ahead of a submission passed over mesh draws, as their pipelines had no stage libraries. Where they have
them now, a mesh draw the scan reaches is looked up with its mesh and task stages and its state is named to the
pipeline hints, so the library of its task and mesh stages, the one that takes longest to make, is building before
the replay gets to the draw. Never with the mesh fallback, which draws through vertex pipelines of its own.

A mesh draw that waits for a fast link was cut off once its pipeline had been building for 8 ms, since no link
could come. That rule now holds only for a mesh pipeline without stage libraries: with them the draw waits as a
vertex draw does, the few milliseconds of pipe_link_draw_ms from its pipeline's first miss. A one-shot mesh draw
keeps its 8 ms: when the caches lack the task and mesh library, making it is as long a compile as the whole pipeline
was, and the frame's wait pool is not spent on that.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:31:13 -05:00
chrg6
17aee6ea73 Link mesh pipelines from stage libraries like the vertex pipelines.
A mesh pipeline (task and mesh stages: the foliage, the grass, the terrain) had no stage libraries. Each new one was
a whole build, 0.2 to 1.1 s the first time foliage of a kind appeared, and its draws waited or were left out of the
picture until it was done.

Where the graphics pipeline library is on, a mesh pipeline is now linked at its first use from three libraries and
its whole build follows behind, as for a vertex pipeline. Its pre-rasterization library holds the task and mesh
stages and is keyed by both shaders. No vertex input library is linked: a mesh pipeline has no such state. Its layout
is a stage-independent pair, the mesh and task stages' bindings in set 0 and the fragment stage's in set 1, so the
fragment shader library can be the one a vertex pipeline uses. That library's key now also carries what a mesh
pipeline's fragment module gets filled in and whether the shading rate is dynamic state, which the pre-rasterization
and the fragment shader state both hold. The fragment output library is shared as it is.

The fast link on the library workers, the wait of a draw for its libraries and the pipeline hints take mesh pipelines
in. The summary counts them by themselves: fast links and their time, how long the ones a draw missed took to become
usable, and the libraries made for them.

NX2NAVI_GPL_MESH=0 (gpl_mesh in nx2navi.ini) keeps the whole build. It is also kept without the pipeline library, on
a device that draws no mesh pipeline, and where mesh pipelines alone are built without the driver's optimiser; the
start logs which is in use and why. The mesh emulation of the low-end GPU mode is not touched.

A mesh pipeline with libraries is another pipeline to the driver than the one built before, so an install's recorded
mesh pipelines are compiled once more at the first start with this change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:31:11 -05:00
chrg6
b1f1ee3d48 Say in the log that the whole warm waits for the recorded pipelines only as long as it may take.
With the warm's time limit the line that promised a wait for all of them was wrong when the limit ended it first.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:30:56 -05:00
chrg6
9100509b00 Enable the drivers' low-latency extensions only in a run that starts with the setting on.
With the setting off the device is made exactly as before the mode existed, so the mode cannot change anything for a player who never turns it on. Turning it on in the menu then takes a restart, and the row says so; in a run that started with it on, changes still apply at once.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:30:56 -05:00
chrg6
b197136f56 Describe the profile-guided build of game 1.1.1 and the session that trains and measures a profile.
The section described the build of the other game versions with an example for 1.4.3. It now says how make_game.py
takes a kit's profile and when it leaves it out, which LLVM releases write and read the file, which packages the
instrumented build and the merge need, and the steps of a training session for 1.1.1: the build command, where the
game is started, what to play, where the counts land, the merge, and the comparison of both builds with the runtime's
sampling profiler and its frame timings.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:30:46 -05:00
chrg6
0b974d04f1 Carry an execution profile in a launcher release.
make_launcher.py --pgo FILE puts the profile and its record into app/<version>/data, where make_game.py looks for it,
before the prebuilt runtime is built, so the runtime library is compiled with it. The profile is part of the app zip
the update feed serves, so the build after an update compiles with it. The release stops before it downloads or
builds anything when the record names another recomp/ than the checkout's, and after the runtime library when the
release's compiler, the one players build with, left the profile out.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:30:46 -05:00
chrg6
2ede7101fa Build game 1.1.1 with the kit's execution profile, and make its instrumented build.
tools/make_game.py, the build players run through the launcher, read no profile: only tools/build_game.py did, which
does not build 1.1.1. A kit with data/pgo-v111.profdata (build/pgo/ in a checkout) now compiles the lifted code at -O2
with it and the runtime too, the prebuilt runtime library included. The profile is left out, and every command and
key is what it was, when the kit has none, when its record names another recomp/ than the kit's, when a compiler of
the build refuses the file in one trial compile before the others start, and with NX2NAVI_PGO=off. The record holds
recomp/ by content, which a kit without git can compare. The object keys hold the profile's content and not the kit's
folder, so a launcher update that moves the kit keeps the objects.

--pgo gen (NX2NAVI_PGO=gen from a launcher) builds the instrumented game into the game folder: it counts into
<out>/pgo, records what it was built from for the merge, and stops at once when the build tools lack the profile
runtime. tools/pgo.py merge takes that record, refuses a game built from another recomp/ and finds llvm-profdata in an
MSYS2 folder too. tools/check_content.py refuses profiles in a commit.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:30:46 -05:00
chrg6
a84a555128 Describe the low latency mode in the architecture document.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:29:59 -05:00
chrg6
191a439fe4 Add a Low latency row to the menu's Screen tab.
Off, On, and On with boost where the mode is NVIDIA's, in English, Russian, Brazilian Portuguese and Simplified
Chinese. The row is greyed out with the reason where the mode cannot run: a driver with neither extension, a run in
which DLSS frame generation brings its own low latency, and NVIDIA's while a frame generation presents the frames. A
mode the driver refused says so under the value.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:29:59 -05:00
chrg6
c37fb7dc40 Hold each frame's start in the driver while low latency is on, and let that keep the frame limit.
The driver's sleep sits where the game's frame starts: at its first pad read or window image acquire after a present,
whichever comes first, before the input is sampled. The frame's number, the count of the game's presents, goes with
its work: the guest thread marks the simulation and the first submission, the replaying thread tags its queue
submissions and marks their end, and the present thread marks the host present, which carries the number too. The
window's swapchain is made with the latency mode while NVIDIA's path is on, and remade when the setting changes.

While the mode is in effect the pacer holds nothing, so a picture goes out as soon as it is drawn and the limit is
kept by the driver before the pad is read; RivaTuner Statistics Server is kept out as with frame generation. The pacer
takes the limit back while a movie plays, while no host present goes out, and for the rest of the run when the frames
show the driver does not hold it. With the mode off every hook returns at its first check.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:29:59 -05:00
chrg6
2f30f1a2e5 Add the low latency setting and the module that drives the drivers' own modes.
NX2NAVI_LOW_LATENCY (0 off, 1 on, 2 on with boost; live) is for low latency without frame generation: NVIDIA's mode
through VK_NV_low_latency2 and AMD's through VK_AMD_anti_lag, each enabled on the device only where the driver lists
it, NVIDIA's with VK_KHR_present_id, which it needs, and AMD's with its feature. A device made by the DLSS Frame
Generation proxies gets neither: that path keeps its own low latency. vk_lowlat.c holds the calls, the frame numbering
and the statistics line; nothing calls into it yet beyond the start and the end of the device.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:29:59 -05:00
chrg6
d9bc002d9a Play the game's own amplitude at the default vibration strength on the HD rumble path.
The default strength is 130 to make up for what two motors lose. A linear actuator that takes the game's value needs none of that, and 1.3 times the amplitude clipped the strongest pulses at the safe maximum. The HD path now divides by the default, so the setting scales from the game's own amplitude.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:29:04 -05:00
chrg6
aeb6c0d5c1 Add the HD vibration row to the Controls tab and describe HD rumble in the controls guide.
The row switches rumble_hd and is greyed out, with a note of what it needs, while the gamepad in use is not a Switch
Pro Controller or Joy-Con. Its texts are in all four menu languages.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:28:36 -05:00
chrg6
df8431da7b Send the game's vibration values as they are to a Switch Pro Controller or Joy-Con, behind rumble_hd.
With NX2NAVI_RUMBLE_HD=1 (live, off by default) the gamepad the game reads, when it is a Switch Pro Controller, a
single Joy-Con or a pair of them, gets each side's low and high band with its own frequency and amplitude in the
controller's rumble report, and no dual-motor call any more. A Pro Controller and a single Joy-Con take the report
through SDL's effect call, over USB and Bluetooth; SDL refuses that call for a combined pair, so a pair's reports are
written to its two HID devices directly. Every other gamepad, the Switch 2 controllers included, keeps the motors.

The game's thread posts its newest values and a thread of input.c writes the reports: at most one every 15 ms
(rumble_hd_ms), a held value again every 30 ms, and the neutral value when the game stops sending for 250 ms, when
another gamepad takes over, when the setting is turned off and before the process ends. The rumble strength scales the
amplitude and rumble = 0 silences this path as well. With the setting off nothing is written to the controller: the
log line at the take names it by its ids, and the first report is the trial.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:28:36 -05:00
chrg6
59e3c6c35a Add the encoding and the report schedule for HD rumble on Switch controllers, with their check.
runtime/rumble_hd.c turns one of the game's vibration values (a low and a high band, each with a frequency and an
amplitude) into the four bytes a linear actuator's rumble report takes, clamps the frequencies to each band's ends and
the amplitude to the last safe step, and decides when a report is written: the newest value only, a held one again
every 30 ms, the neutral value three times once the game stops. Nothing calls it yet.

tests/rumble_hd_check.py builds it alone, checks known values, the clamps and a batch reduced to its reports, and
decodes a sweep of values with formulae of its own.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:28:36 -05:00
chrg6
3572a4d433 Number draw marks atomically, since the replay's workers record them too.
The mark counter and the ring were written as if only the replay thread made draw marks, but a pass's chunks are
recorded by the replay's workers side by side, and each of them marks its draws. The number is taken atomically now,
and each number has its own slot of the ring. The report says what the numbers mean with workers on: the two marks
the GPU names are exact, the numbers between them are in recording order and not all later in the queue; the mark
the GPU last reached is always printed, also when the list does not come to it.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 22:28:26 -05:00