Each made its images at the picture's or the scene's size the first time it ran and kept them until the process
ended, also after the menu switched it off:
- the HDR encode's picture and menu image (28 and 14 MiB at 2560x1440, 63 and 32 MiB at 2160 lines) now go when the
swapchain is made without HDR, after a wait for the presents that may still read them;
- FSR 1's two images (56 MiB, 127 MiB at 2160 lines) go after 300 presents it did not scale, with the same wait;
- SMAA's three work images (35 MiB, 79 MiB at 2160 lines) go after 600 frames of another anti-aliasing, deferred past
the submission being recorded.
Each makes them anew when it runs again; one log line says when they go.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With NX2NAVI_REPLAY_PIPE=1 (off by default) the submitting thread hands a group's chunks to the workers, takes chunks
of it itself until none is left to take, and goes on with the ops after the group in a new command buffer after the
chunks' places in the part (vk_sync_append_later), also into the next group's front pass.
Up to four groups are handed out and not in their part yet; their chunks wait in one queue in the order of the stream.
The submitting thread waits for them only where the order needs it: for room, before a part goes to the GPU, before
copies and texture or buffer clears, where DLAA's run or the contact shadows' hook acts, and where a lookup would make
a texture entry or take back a retired one (the op goes again afterwards, as a chunk's does in turn).
What the chunks read stays as the stream had it while the submitting thread runs ahead: uniform snapshot drops count
from their place in the stream, a chunk reads only the inline uniform updates before its group, the HDR present's
source goes by stream position, the texture pool set syncs under the chunks' lock, each group keeps its own render
conditions, occlusion segments and closed query slots, and the queries after a group's last report go into the next
segment made after it. A group's first chunk runs its pass hooks after the group before began its pass; turns wait
for every earlier chunk, of earlier groups too. Locks the chunks take, the submitting thread takes while it is behind.
Draws keep the sampled-texture descriptors they resolved per draw context and reuse them without the texture lock
while their slot is unchanged; the workers waited for that lock at nearly every draw. Texture lookups that change
nothing no longer wait for their turn. The perf line says where the submitting thread waited, what the chunks took,
and which texture lookups waited; NX2NAVI_GPU_TIMELINE also shows the chunks and the waits.
Off by default because it does not pay yet: in Hyrule Field with 3 workers it shortens the replay (11.5 against 12.1
ms a frame) but not the frame (49.2 against 49.6 fps in the same batch). The GPU gets a group's commands only once its
last chunk is recorded, so the main thread's wait for the GPU after the frame's first submission grew by 0.8 ms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Stage 2 of NX2NAVI_REPLAY_WORKERS (default 0, the replay as before). A run of draws is cut into groups: a group ends
where the render targets change after its first draw or clear, and before an inline uniform update, a mesh draw and a
samples-passed counter op, which the submitting thread replays itself in the order of the stream. A group of 64 draws
or more is first walked by a front pass on the submitting thread: it applies the state and binds, settles the CPU side
of the timestamp reports and decides the render conditions in the order of the stream, and copies the replay state at
the first op of each chunk. The workers and the submitting thread then take the chunks in order and record each into a
command buffer of its own, which vk_sync_append puts into the part in the order of the stream.
The frame's pass hooks (contact shadows, DLSS) run in a group's first chunk, which the others start after. What still
depends on the order between chunks waits until every earlier chunk of the group is done: a texture lookup that would
make or take back an entry returns nothing and the chunk replays the op again in turn, and so do the contact shadows'
pass, per-object motion and the HDR pass's source. The tables the chunks share take locks (the shader table, the
descriptor lists, mirror use and GPU write notes, uniform snapshot drops, target frames, the DLAA camera votes and the
previous-frame motion notes); each chunk keeps its own occlusion query open, its own feedback memo and no pass marks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The HDR row lists Off, RenoDX (the game's picture tone mapped to the display, the one fixed look) and Native (the game's own HDR, taken up at the next start), with the peak, game and HUD whites under either.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR on is the game's scene through the observer-response mapper, anchored to the game's own mid grey and tone slope, with half of the hue bend of the game's clamp: the defaults the menu had. The tone mapper choice, the mid grey, the tone slope and its match, the hue clip, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare, hue, grade and gamma are gone from the menu, the settings table and the example ini; a file that still sets them works as before, the keys read by nothing and logging nothing. The menu's HDR row is Off and On, with the peak, game and HUD whites under it. The game's own HDR is still there for a file that sets hdr = native, and the row lists it only then. The luminance mapper and its grading code, which no setting reaches any more, are removed from the tonemap library, and the support buffer carries one vec4 for it.
The dark tones of a dark scene sat far above black: the present showed the game's sRGB-encoded picture as that encode decodes, linear near black, while the game is graded for a display of gamma about 2.2, and since the observer-response mapper became the default the 2.2 correction ran with the luminance mapper only. A scene value of 0.003 came out at 0.29 nits at a white of 350 nits, where a 2.2 display shows the game at 0.015. The present now always shows the picture as a 2.2 display would, and the tonemap aims its peak lower by that correction's inverse, so the brightest light still reaches the display's peak; the same value comes out at 0.017 nits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
A shot taken from an HDR10 swapchain (the menu's test hook, NX2NAVI_SHOT_EVERY) now writes the picture's luminance in nits to the log, the darkest pixel, four percentiles and the brightest, and its pixels as the swapchain holds them beside the PNG. The PNG of such a shot shows the HDR display's light at the HUD's white through the power 2.2, not the sRGB curve, so a dark tone the HDR display lifts looks lifted in it too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The first run of the new tone mapper showed shaders whose exposure the splice did not find, which then took a gain of 1: a current cache holds 54 shaders the splice takes, in more shapes than the three it was written against. The gain is now the factor the three channels have in common: a uniform, or a value the vertex shader passes; under a computed local exposure, the uniform of the inner product; and in a multiply-add, with a colour added per channel after the exposure. The tonemap function gets the exposed values without local exposure and the gain, and divides by the gain itself. All 54 shaders of that cache splice with their exposure found and validate; the picture on an HDR display has not been judged.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The HDR tonemap gains a mapper built on a finite cone response in LMS: scene grey 0.18 lands where the game's curve puts it and rises through it with the slope of the game's curve, and the hue bend of the game's clamp is given back to bright colours. It takes the scene before the game's exposure gain and the gain itself, which the splice now finds in the game's shader. The luminance mapper stays selectable and the game's own curve stays the third choice. The mapper fits the Rec. 709 gamut here, as the game's scene target holds no negative component. New settings: the tone mapper's mid grey, tone slope match, tone slope and hue clip emulation. The gamma correction on the present applies with the luminance mapper only.
Not part of this: eye adaptation, the anti-aliasing and reconstruction shaders, bloom and local exposure sliders, the output colour space choice and a 16-bit float scene target. Checked by build and numerically against the source of the port; the picture on an HDR display has not been judged. THIRD_PARTY_NOTICES.md names the source.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
In the settings menu a click anywhere on a row stepped its setting to the next value, and the left arrow stood left of the value's text, so it moved whenever a value of another width came up: clicking the left arrow through a list landed on the row at the second click and stepped the other way. Each stepper now has its arrows in white frames at fixed places, the left one the width of the row's widest value from the right one, and the mouse changes the value on those frames only; a click on the rest of the row selects it. On and off rows have the same arrows. An arrow at the end of its values is drawn faint and does nothing, and a button held on an arrow repeats as a held key does. A, Enter and left and right work as before.
NX2NAVI_MENU_TEST_CLICK clicks rows by their setting's name during a menu test run. On an RX 7900 XT at 3232x1352 the arrows stepped the performance overlay one value a click and stopped at both ends, and clicks on the body of four rows changed nothing.
HDR between off and the tone mapper now follows the menu. The HDR path is set up at every start (vk_hdr_armed): the swapchain colour space and metadata extensions, the tonemap splice and the settings in the support buffer, with the spliced tonemap returning the game's own SDR result while the swapchain is SDR. A change of the setting makes the swapchain again in the other format. On the same card a run that started with HDR off went to an HDR10 swapchain and back, and one that started with HDR on went to SDR and back, with the picture right in each state. The game's native HDR still waits for a restart, as the game asks about the display once, and the row says so. NX2NAVI_HDR_LIVE = 0 leaves the HDR path out of a run that starts with HDR off.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game's ACES tonemap shader gets a GLSL function linked into its SPIR-V where it clamps each channel: the game's SDR result upgraded to the HDR range by luminance and mapped to the display with the RenoDRT curve, exposure, highlights, shadows, contrast, saturation, highlight saturation, blowout, flare and hue correction. The settings reach it as four vec4 the support buffer gains at 1440. The present encode is a port of the swap chain pass: gamma correction, gamut compression, the peak clamp and PQ. Without an HDR10 swapchain the shader gives the game's own SDR picture; native HDR is unchanged.
The menu offers Off, RenoDX and Native, with gamma correction, the tone mapper and its grading rows. The shader build compiles sources marked "keep functions" without optimisation so their functions survive for the splice.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Performance: draws reuse the bindings that did not change and record only the dynamic states that differ from what
the command buffer holds; small uploads come from a staging arena; finished submissions are held briefly and handed to
the queue in batches; the recorder thread can keep a CPU core of its own; ASTC block-linear textures are deswizzled on
the GPU; dynamic resolution steps the upscaler mode to hold a frame-time target. Each has a setting in nx2navi.ini
(bind_reuse, dyn_delta, stg_arena, submit_batch, recorder_core, recorder_prio, astc_gpu_deswizzle, dyn_res) and the
staging cache now frees what it holds at shutdown.
Capture: NX2NAVI_DUMP=key saves the frame after each press of Insert, with mesh draws listed by task, mesh and fragment
shader, depth test and face culling, and mesh_prims.txt giving each mesh draw's primitive, clipping and fragment counts.
All of it is off unless NX2NAVI_DUMP is set.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
With hdr = native the game's output pass writes a 10-bit PQ target (A2B10G10R10), not the 8-bit sRGB one vk_dlaa_pass looked for, so DLAA never ran and frame generation had no depth or motion vectors for most frames. The native HDR picture's format is now named once (vk_hdr_native_picture) and taken by both DLAA and the HDR present. From a tester's fixes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Translator patch 0031 (0.4.0) writes the tonemap's 0..1 clamp as GLSL NClamp, and vk_hdr.c looked for FClamp only, so
Enhanced HDR left the tonemap as it was and showed the SDR picture. The output clamp and the ACES clamp now match
either form, and the replacement keeps the NaN rule: NMax for an NClamp (NaN gives 0, as the clamp did).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Crashes: the render-target heap (HeapDef DynamicTextureAllocatorMem and its parent) grows with the widescreen
picture, so the pause menu no longer reads a null block at 5120x2160; texture uploads keep the game's memory mapped
while they copy it, so UnmapPhysicalMemory no longer pulls it away mid-copy; DLSS Frame Generation no longer crashes
in Streamline's set-up (physical devices and the window surface go through its proxies, its swapchain images are
counted first, resources are tagged per frame); a stale core-wait target is cleared before its thread is freed.
Freezes and races: a resize during a swapchain rebuild is kept, a failed frame generation swapchain is retried
instead of replaced by a plain one, three acquire timeouts in a row rebuild the swapchain, device waits take the
queue lock, a translator child that stops answering times out, an in-flight compute pipeline builds at normal
priority, a save Commit started before the window closes finishes and none starts after, a settings change just
before closing is saved, and a movie sample taken before a flush is dropped.
HDR: Enhanced HDR extends the game's own tonemap so highlights go above the picture's white (the hue slider,
which no longer applies, is gone from the menu); frame generation gets a HUD-less picture, the HDR flag and the HDR10
metadata under HDR too.
Memory: ASTC textures are encoded to BC3 unless the PC has 20 GiB of VRAM and 48 GiB of RAM, as Windows charges video
memory to the commit charge (a long session held 17 GiB of RGBA8 textures and 45.7 GiB of commit on a 32 GiB PC).
Shaders: the translator lowers spill-mode programs with more than eight uniform register groups in a wider spill
layout, and local loads and stores with a uniform-register address (36029 of the game's 36031 variants translate,
20 failed before).
The launcher release ships the shader tools and AMD's FidelityFX library (make_launcher.py --ffx); windres there gets
the toolchain on PATH.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
HDR is now a menu row: Off, Enhanced (the runtime's own HDR tonemap) or Native. Native reports an HDR10 display to
the game with the settings' peak and paper white; the game then renders its own HDR picture and presents it as PQ in
A2B10G10R10, which goes to the HDR10 swapchain as it is. The peak, game, HUD and (for Enhanced) hue rows follow it.
The build kit's link left out runtime/nx2navi.rc, so the game had no manifest and no icon: without per-monitor DPI
awareness, a 5120x2160 monitor at 150 % gave a 3413x1440 window that Windows stretched. It is compiled with windres
and linked again.
The movie decoder's frames are copied into the game's buffer by the host; the back end is now told of that write, so
the GPU's copy of the buffer does not keep older or empty bytes (green stripes in NV12).
A longjmp out of the game's JPEG decoder now logs the guest functions that called it, to trace a later crash.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Comments say what the code does and why, docs/maxwell.md keeps the Maxwell facts, and fetch_refs.sh clones only the checkout the build reads. Code is unchanged.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>