Commit Graph

10 Commits

Author SHA1 Message Date
chrg6
26f3dc47ec Show the low-end GPU mode's settings under its switch in the Game tab, and read them only while the mode is on.
The settings had a tab of their own; they are rows of the Game tab now, listed under the switch once the mode is on after a restart, and the tab is gone. With the mode off every one of them reads as unset, whatever nx2navi.ini or the environment says, so nothing of the mode acts unless a player turned it on; the build reads guest_opt the same way. The notes describe that, and take the white edges in towns and the dropped textures from the known issues to the fixes.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:59:43 -05:00
chrg6
d2fbaba1c3 Put the low-end GPU mode in the settings menu's Game tab, marked experimental.
The row sets low_end_gpu, read at start, and says what the mode turns on and that it was measured on one card; its text is there in the menu's four languages. The key is decided again once the settings file is read.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:06:02 -05:00
chrg6
2324a74602 Turn the settings for older graphics cards on with one key, low_end_gpu = 1, and leave them off without it.
Mesh shaders as compute, the texture that gets memory of its own, staged mirror uploads and the shorter wait for the GPU, widened write-watch queries, the video memory limits and reserve, early upload batches, the asynchronous replay, the hot-pool rule and the recording thread on AMD cards without mesh shaders were measured on a Radeon RX 580 and run on no other card. Each keeps what 0.9.1 did unless the key or its own setting says otherwise; the key gives the defaults the way the device profile does. The notes describe them as that option, hold main's two new entries in one Changed section, and list the white edges in towns as a known issue.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 13:00:13 -05:00
chrg6
052c60dc0d Merge remote-tracking branch 'nx2navi/main' into release-0.9.2 2026-11-12 12:56:51 -05:00
epicmeme546
385734dcc0 Sharpen FSR 3.1 more below a render scale of three quarters: its own sharpening towards the maximum, and a second, lighter RCAS pass over its picture.
FSR 3.1 was soft at Performance and Ultra Performance, most of all in motion. On a village save, while the camera turned at a steady rate (present screenshots every 0.4 s, the mean absolute Laplacian of the scene's luminance): FSR 3.1 Native AA 6.7, FSR 4 Performance 5.9 and Ultra Performance 5.4, FSR 3.1 Performance 4.0 and Ultra Performance 3.3. The library's own input checks found nothing wrong, and its tuning constants (velocity factor, accumulation per frame, shading change scale, behind the test switch NX2NAVI_FFX_KEYS) gave nothing or took detail away. Its own sharpening at 100 instead of the default 80 gave 5.0 and 4.1.

Now the share of extra sharpening grows from none at three quarters of the output's width to all of it at half (vk_dlaa_fsr3_boost). FSR 3.1's own sharpness goes that share of the way to its maximum, and its picture gets a second RCAS pass (shaders/dlaa_sharpen.comp, AMD's FSR 1 header with the linear light taken through c / (1 + max c) and back), before the HUD is drawn. Both follow the sharpness slider; 0 turns them off, and NX2NAVI_FSR3_SHARPEN=0 leaves the second pass out. At RCAS's full strength the pass took Performance to 8.2, past Native AA, with grain on every surface, so it runs 1.5 stops weaker: Performance 5.7, Ultra Performance 4.7, Quality 5.2. 63.4 fps against 65.1 without the pass. The HDR picture is clean. FSR 4 is untouched.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:50:43 -05:00
epicmeme546
7581bb887d Let the free camera go anywhere, and make ground avoidance a switch that is off unless asked for.
The camera kept its height (only ZR and ZL changed it) and rose whenever the closest surface in the lower part of the view came within about three metres, so flying up to a character, a rock or a wall sent it upwards. It now moves where it looks and nothing stops it, the ground included.

Ground avoidance is a checkbox in the debug menu's free camera section. With it on, the nine view distances read back from the lower view become points of the scene (from the view's angles and the camera's pitch), and only a column whose lowest surface rises by less than about 30 degrees counts as ground: the camera goes no lower than a metre above it. Steeper things, objects and walls, are left alone. The read-back runs only while the switch is on.

Tested on a village save, 4 m/s forward for 5 s and then ZL for 4 s: with avoidance off the camera ended 17.4 m lower, through the floor; with it on it ended 0.7 m lower and held there. Flown at Link with the first version of the ground test, its height did not change.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:50:43 -05:00
chrg6
eccbc96873 Add the shadow bias fix to the 0.9.2 notes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:40:43 -05:00
chrg6
5e006aec8a Make the release 0.9.2, with its notes.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 12:17:56 -05:00
epicmeme546
322d7c0933 Run DLSS or FSR where the game's own upscaler runs, and fill a jittered pass's edge rows as soon as it ends.
With the HUD hidden the screen showed the scene at its render size instead of the upscaler's picture. The upscaler ran at the pass after the game's own upscaler, taken for the pass the HUD is drawn into. Without a HUD the game draws no such pass: the next one is the frame's last, which encodes the stand-in's scaled scene into the 8-bit output. The upscaler's picture went into that target and the last draw drew over it. A player's save with the HUD off showed blocks of render pixels, a picture jumping by a render pixel between frames, and the undrawn edge row in white, at every FSR mode and at Native AA; every test save until now had the HUD on. vk_dlaa_upscaler now runs the upscaler right after the stand-in of the game's upscaler wrote its output image, and puts the picture there (NX2NAVI_DLAA_AT_UPSCALER=0: as before).

The edge fill moves to the end of each pass that took the jitter (vk_dlaa_pass_end), for the pass's colour targets and depth, in one copy of eight regions per image. Filled only before the upscaler, the undrawn row had already been read by the water, the bloom and the anti-aliasing pass.

On a copy of the player's save (HUD off), FSR 4 Ultra Performance, world slowed to 1/20, present screenshots 0.25 s apart: the picture moves 0.00 to 0.02 px between shots (old placement: a jump of one render pixel in 5 of 20), the change on edges is 1.9 against 16.9, and no shot has the white row (half had it, with HDR on). Native AA, Performance with HDR, and FSR 3.1 are steady and clean as well; the save with the HUD on is unchanged. A run through a stream: 0 of 106 shots with a bright bottom edge (20 of 102). Frame rate 58.3 fps against 58.6.

Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
2026-11-12 11:14:16 -05:00
epicmeme546
2495391dd7 Fill the scene's outer rows and columns in every jittered frame, and take only turns of 30 degrees a frame for camera cuts.
A player's clip at Ultra Performance still showed the sky's colour in the last row of about half the frames. In those frames the fill, done only after a jitter to the left or up, had not run. The outermost row and column on each side of the light target and the depth are now filled from their neighbours whenever the frame was jittered, whatever the jitter's direction. A copied border pixel is nothing anyone sees.

A quick swing of the camera around Link turns it 11 to 18 degrees and moves it 0.9 to 1.4 m a frame. That was taken for a cut, and nine frames in a row started a new history, which showed the scene at its render size, blocky at the smaller modes. A cut now needs a move of 5 m or a turn of 30 degrees with a move.

Hyrule Field, FSR 4 Ultra Performance, present screenshots: standing still and on grass while running, the bottom edge matched the rows above it. Over water a bright bottom edge remains in a fifth of the moving shots, and none with the jitter off: the water reads the scene before the fill. The 0.9.2 notes list it as a known issue, with the frame rates and FSR's GPU times measured for the Ultra Performance question.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-12 10:22:00 -05:00