Found by a review of the compute prebuild change:
- cf_log formatted and wrote its log line while holding the pipeline lock shared, on the autosave thread, which runs below normal priority; every dispatch needs that lock. It now copies the numbers and writes after the unlock.
- The record could be written by the autosave thread and by a save at exit at the same time, so the older copy could land on the newer file; and a failed write cleared the changed mark, so nothing tried again. One writer at a time now, the copy is allocated outside the lock a dispatch takes, and a failed write leaves the record marked.
- compute_keep read anything that was neither "all" nor a number as 0, which keeps nothing; it now reads as the default.
- The statistics called a pipeline "read from the pipeline cache file" when the driver said the pipeline cache held it, which is also true of what the same run built into the cache earlier. The lines now say the pipeline cache held it. The probe's skip line names the settings that also lead to it.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The 2 GiB of device memory a filled cache cost was not the thousands of compute pipelines but twenty of them: the compute shaders of 0.9 to 2.0 million SPIR-V words, the game's tensor-core upscaler programs, which nothing dispatches. A pipeline of one holds about 100 MiB of device memory from the moment it exists, and the driver keeps that memory when the pipeline is destroyed, so keeping only the recently dispatched pipelines did not help: the boot pass still created the twenty from pipeline-cache.bin at every start. Measured with --probe-prewarm on a copy of an installed copy's caches (RTX 5090, NVIDIA 621.01): the pass over all 4,066 compute shaders took the device memory from 386 to 2,398 MiB and the process's commit up by 2.5 GB; the same pass before the twenty were in the cache left the device memory at 386 MiB, and all 4,046 other pipelines kept at once cost 2 MiB.
A compute shader over NX2NAVI_LIB_PREBUILD_BIG is now built ahead, from the caches or by the background builder, only when the usage record says a run dispatched it. None of the twenty is among the 138 shaders eleven runs dispatched. Should the game dispatch one for the first time, that dispatch compiles it once and later boots build it ahead.
The boot also reads the shader of a pipeline it does not keep as a copy and releases it after the build, instead of leaving 3,900 shaders loaded (240 MB of commit); a first dispatch then reads its shader from the disk, 0.04 to 0.10 ms in the probe.
With both, the same pass on the same caches leaves the device memory at 386 MiB and raises the commit by 47 MB; 256 first dispatches after it took 0.13 ms on average, 1.8 ms at most, all read from the cache file. With compute_keep = all, which builds everything as before, the pass ends at 2,528 MiB. Not yet run in the game.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
An installed copy's warm list has 42,344 variants, 42,142 of them from shader-prepared.bin, and its 4,066 compute shaders are what the boot kept pipelines for. The comments and the settings text said the list grew with the play history; a copy with prepared shaders held the 2.3 GiB from its first boot. Comments, docs and the ini text only.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit ea984fe05b995c5dad1e0f49c5f44de9ee8f19b2)
After an update or a driver update every recorded compute pipeline is compiled again in the background: about 140 ms each on an RTX 5090's driver, so minutes of two threads for a long play history. Those compiles ran at normal priority, because a dispatch of a shader being compiled waits for that build and an idle-priority compile under load had held such a frame for seconds. On a CPU with few cores that put two more threads in equal competition with the game's own.
The compile now runs below normal priority, and the dispatch that comes to wait for it raises the thread to normal, as it already does for the background builder of large compute shaders. Not measured in play.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit e2b38ffb22690b1656d22fbc504d000554877e0d)
The boot prebuild built the pipeline of every compute shader play ever recorded and kept all of them for the process. A pipeline that exists holds driver memory whether or not anything dispatches it: with a history of 4,066 compute shaders they held 2.3 GiB of device memory, and its share of the process's commit, from the title screen on (RTX 5090, NVIDIA 621.01), while a boot into the first village dispatched 95 of them.
The boot now keeps the pipelines of the 512 compute shaders dispatched most recently (compute-used.bin next to pipeline-keys.bin records which run last dispatched each; the setting is compute_keep, with "all" for the earlier behaviour). Every other one is still built at boot, so that the pipeline cache holds it after an update or a driver update, but destroyed at once, and created from the cache at its first dispatch. A dispatch that comes while such a build runs gets that build's pipeline.
Each boot stage now logs the device memory and the process commit it leaves ("mem: boot stage"), and the log says what the first dispatches cost. nx2navi.exe --probe-prewarm runs these stages without the game from the caches next to the executable and times first dispatches of pipelines the boot did not keep: 256 of them took 0.19 ms on average and 3 ms at most, all read from the pipeline cache file, and 372 pipelines built and destroyed at boot left the device memory where it was.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 16a796d623686bca5304eaf1b29981247453a413)
The rule that releases the kept features acted only after a feature had been freed. Picking ultra performance in play
made a feature of a third size while the gameplay and pause features stayed, with nothing freed, and the next pause was
striped as before. What the two cases share is a feature made while one with a larger input is alive; one made while a
smaller one is alive has never shown it. Both halves now apply unless dlss_idle_free is 2, and 0 only stops idle
features from being freed.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A pause of 3,600 frames frees the gameplay feature; the unpause makes it again, and the pause screen's feature, which
had stayed, drew alternating bands of rows black or noise at every later pause. A scripted pause, unpause, pause was
striped in each of the 8 runs in which the gameplay feature had been freed and in none of the 12 in which it had not;
setting the kept feature's sizes at each evaluation, tried first, changed nothing. Features made one after the other
with no release in between are fine, so that is now the only way one is made. dlss_idle_free = 0 keeps every feature
instead, 2 is the old behaviour.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The rule of 16acd83 acted only after a feature had been freed. Picking ultra performance in play made a feature of a
third size while the gameplay and pause features stayed, with nothing freed, and the next pause was striped as before.
What the two cases share is a feature made while one with a larger input is alive; one made while a smaller one is
alive has never shown it. Both halves now apply unless dlss_idle_free is 2, and 0 only stops idle features from being
freed.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 53a2e7818c3bede9f916e8a102dea038142af0c3)
A pause of 3,600 frames frees the gameplay feature; the unpause makes it again, and the pause screen's feature, which
had stayed, drew alternating bands of rows black or noise at every later pause. A scripted pause, unpause, pause on
0.6.1.22 and 0.6.1.23 was striped in each of the 8 runs in which the gameplay feature had been freed and in none of the
12 in which it had not; setting the kept feature's sizes at each evaluation (the commit reverted before this one)
changed nothing. Features made one after the other with no release in between are fine, so that is now the only way
one is made. dlss_idle_free = 0 keeps every feature instead, 2 is the old behaviour.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit 16acd83397d0b59904fd4c0bd96cea8285bc0a6f)
The NGX parameter object is one for every scene size, and the sizes and the mode were set in it only when a feature
was made. Once the gameplay feature had been freed unused during a pause of 3,600 frames and made again at the unpause,
the pause screen's feature ran with the gameplay feature's smaller input size at the next pause: every other band of
rows of the picture came out black or noise for as long as the game stayed paused. Reproduced with a scripted pause,
unpause, pause on 0.6.1.22: striped in every run in which the feature had been freed, clean in every run in which it
had not, whatever the texture, write-back, HDR and frame generation settings.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
(cherry picked from commit aa3c34e163c700b4e426eb094e080c157eaac8bf)
Three faults a tester's 39 minute session showed (a 24 GB card, 32 GB of memory, a 64 GB commit limit), each still in the code:
A pool gets no VRAM mirror past seven eighths of the budget, and textures only gave way above 90%, so at 88% mirrors of 0.4 MiB were refused and the game ran at 11 to 20 fps while the textures of areas left long before stayed. The default of tex_vram_pressure is now 80. A refused mirror's request for room also stands until the use is down to where the mirror fits, for up to 64 checks, instead of buying the 64 textures of the one check that read it.
While the commit was low, live textures went only once the released entries were down to 256 MiB. Where the game releases and takes back 200 to 300 textures a frame the released entries held 1.4 to 2.0 GiB, none stale, so nothing went at all. Live textures now go as soon as the released entries have no full step of stale ones left; the entries the game takes back stay, as before.
The commit counted as low only by the system's figure, which depends on the page file: 59 GB in use of 64, with this process at 42 GB. tex_proc_commit_mb adds a bound on the process's own commit (default the installed memory, at least 24576 MB; 0 turns it off), with a line in the log when it starts and stops holding.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The game's allocator hands out pool addresses that climb through the 64 GiB alias region, and a block of the table, once given to a 16 MiB range, stayed with it for good: after 16 GiB of ranges ever mapped the table logged "out of L2 blocks", and every pool created from then on stayed out of it, so shaders read zeros through pointers into it (foliage, instance and light data) until the game was started again. A block whose last page is unmapped now leaves its range at once and serves another once the GPU is past the submissions that could still read the old entry, as a record does; a range mapped again while its block waits takes that block back. A range that finds no block no longer ends the mapping of the ranges after it, and the log line says how many blocks are in use and waiting.
tests\gpa_check.py builds vk_gpa.c against stand-ins for the allocator, the device and the completion queue and reads the table as a shader does. On the table as it was, its climbing pools read zeros.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The large-cache die's placement is for the game's own threads. --prepare-shaders and --warm-shaders translate and build
on as many processors as they find, so on a two-die processor the placement would have halved them.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Windows places a game on the V-Cache die only when it recognizes the exe as a game, and it does not know this one, so the threads were spread over both dies by frequency preference. cache_die = 1 (the default) narrows the process to the logical processors that share the largest L3; it never widens the set the process was given, and does nothing where every L3 has the same size. The recorder's reserved core is then chosen inside that set.
Co-Authored-By: Claude Fable 5.2 <[EMAIL]>
NVIDIA's Linux driver compiles into a disk cache in ~/.cache/nvidia, shared with every program, and a process adds at most
1 GiB to it (__GL_SHADER_DISK_CACHE_SIZE); a start that finds more than that in several files deletes the later ones.
nx2navi.exe --prepare-shaders builds the 42,142 variants of game 1.1.1 in one process, about 1.5 GB: on the default limit it
stored about 30,700 of them, and the first start after the preparation compiled the rest (and the pipelines built from
them) again.
Unless the environment sets them, the game now points __GL_SHADER_DISK_CACHE_PATH at nvidia-cache beside the exe (made
here, the driver only makes GLCache inside it) and __GL_SHADER_DISK_CACHE_SIZE at 8 GiB before its first Vulkan call, as it
does for Mesa's cache. The docs name both.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
NX2NAVI_ANISO was read once, when the first sampler was made (vk_texture.c sampler_features), and make_sampler raised the level of the surface textures' samplers as it created them. Samplers are looked up by the game's parameters and live until shutdown, so a new level could only reach them after a restart, and the setting had no row in the menu.
The decision which samplers get the level moves from make_sampler into aniso_raised, and sampler_for puts the raised level into the sampler key, as it does with the DLSS texture bias. vk_sampler_aniso_live reads the setting again after a settings change, at each present beside vk_dlaa_frame's bias; on a new level it clears the slots' samplers and bumps the sampler generation, as vk_sampler_dlss_bias does, so the slots and the descriptor caches take samplers of the new level from the next draw. The old level's samplers stay until shutdown like every sampler. The setting is marked live in cfg.c, and the Screen tab gets a Texture filtering row (Game, 2x, 4x, 8x, 16x) with the description the catalog already had.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The pre-snap of a submission took the pools the submission before it had synced. In Ocarina those are another submission's pools: the frame's first and fourth submissions use no pool and queried the pools of the ones before them, and the submissions after them then queried their own pools one at a time at first use. The pools are now remembered by the submission's place in its frame.
NX2NAVI_PRESNAP_PLACE=0 gives the old choice back and =ab switches it in the B blocks.
Co-Authored-By: Claude Fable 5.2 <[EMAIL]>
The world clock (frame_step_world_us) starts at the first present that finds the player actor away from the origin,
and --seconds, --shot, NX2NAVI_SHOTS=w..., timed "@ms" script lines and recordings all run on it. player_pos read the
1.2.1 scene slot for every build that is not 1.1.0 or 1.4.3, so on 1.1.1 it never found a player: a --seconds run
never ended, no picture was taken and timed lines never fired.
On 1.1.1 player_pos now reads the Player actor from the slot [main+0x4e371d0] + 0x480, checks that its name pointer
(+0x20) reads "Player" and takes the position at +0x31c. The slot is empty on the title screen and holds the actor from
the first present after the save has loaded. The other builds keep their scene walk, whose name compare is shared.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The menu test hook's shot of the Screen tab shows only its first screenful of rows, so rows further down (Upscaling, Frame generation) could not be pictured without input, and a hidden test window takes none. NX2NAVI_MENU_TEST_SET now accepts FOCUS=<key>, which calls opt_focus_key for that setting's row: the cursor goes to it and the page scrolls it into view when it is next drawn. It does not switch tabs.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
A DLSS or FSR 3.1 mode picked in the menu changes the scene size at once (widescreen.c wide_present), but the texture LOD bias that goes with it stayed the one of the mode the game started with. vk_dlaa.c dlss_mode asks res_dlss_lod_bias again at every mode change, and res_dlss_lod_bias took the share from R.dlss_k, which decide() sets once at start; res_dlss_mode would move it, but returns first while res_init has not switched the output and scene patch sets on, which is always the case for Ocarina's build. Switching from Performance to Quality kept the bias of -1.00 where -0.58 belongs, and switching to DLAA kept a negative bias with the scene at full size. R.dlss_k is also 0 when the game started with DLAA off or without the DLSS model file beside the executable (the driver's NGX supplies the model then), so FSR 3.1 turned on later, or DLSS on such a machine, had no bias in any mode.
Without those patch sets res_dlss_lod_bias now takes the share from widescreen.c's wide_dlss_share, the share the scene is drawn at, which follows the mode and the upscaler in use; builds with the sets keep R.dlss_k, which res_dlss_mode moves where their scene can change. vk_sampler_dlss_bias logs each change of the bias, so a mode change can be followed in the log.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
vk_mem_collect destroyed dead images, views and buffers while it held cmd_lock, and the replay's uploads wait for that lock. Destroying an image and its memory takes up to milliseconds. The collect now moves the objects out under the lock and destroys them after releasing it.
Co-Authored-By: Claude Fable 5.2 <[EMAIL]>
The fifteen headers of SPIR-V words under runtime/ are no longer tracked. tools/build_shaders.py builds all of them:
the GLSL with glslc, the SPIR-V assembly with spirv-as, and the two shaders assembled in Python from their scripts.
build_game.py builds the missing and the stale ones before it compiles the runtime, and the build kit, the launcher
release and the AppImage build them before they copy runtime/, so a player's PC still needs no shader compiler.
git ignores the headers and check_content.py refuses a compiled shader in a commit. The headers built this way are
byte for byte the ones removed here. vk_mvobj_fs.h is now mvobj_fs_spv.h, named like the others.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The preparation builds every stage library once so the driver's disk cache holds it and a library a draw needs later takes under a millisecond. Turning dynamic vertex input off for AMD's RDNA 3 and newer driver changed the dynamic states every library lists, which gave each one another entry in the driver's cache, and nothing built them again: an update carried the prepared shaders over without the driver step. On an RX 7900 XT (26.10.1) all 42,142 prepared libraries were cold, 93 ms a vertex and 242 ms a fragment library on average. With no pipeline recorded, a walk through a village skipped 11,180 draws while their pipelines built and made 94 draws wait 5.5 s in all, four of them 1.0 to 2.0 s; a player's session log shows up to 114,834 draws skipped in 600 frames and 181 waits of 251 ms on average. Skipped ground and walls appear and disappear, and a skipped lighting pass is a black frame with the interface intact.
- The game checks the driver's cache at every start (vk_pipeline.c lw_start): a sample of the prepared fragment libraries is built, and when their median time says the cache is cold the whole prepared list is built into it again on idle-priority threads while the game runs. shader-warm.txt records a warm in progress, so the next start goes on with one a run ended, and stops the tries on a driver that does not keep the libraries. This also covers a driver update and a cache the driver emptied.
- An update that carries the prepared shaders over runs the game's --warm-shaders (tools/make_game.py warm_driver_cache): 11 s with the libraries there, about 8 minutes with all of them cold on that card.
- A draw whose pipeline is missing waits for its fast link from a budget of 6 ms a presented frame, 3 ms at most each (NX2NAVI_PIPE_LINK_MS), before it is skipped: with warm libraries the link is done within that.
- Full-screen draws wait from their 50 ms budget again instead of being skipped (NX2NAVI_PIPE_SKIP = any is the default; fullscreen stays selectable). With warm libraries the wait is a millisecond.
The same walk afterwards: libraries 0.3 and 0.7 ms on average, 1,605 draws skipped, 1,473 of them in the scene's first 600 frames and 8 to 80 in each 600 after, and 19 waits of 60 ms in all. First visits to four other saves (a mountain pass, the Lost Woods, Kokiri Forest, a river) waited 12 to 84 ms in all except the Lost Woods, where mesh shader pipelines, which have no stage libraries, and vertex libraries that need added outputs still compiled once: 23 waits, 2.1 s in all, the longest 776 ms.
The texture cache counted its waits in presents chosen at 60 a second: at 165 presents a second the 1800 that stood for thirty seconds were 11 s, so a released render target went sooner than meant and a texture out of view for 11 s was retired and showed its stand-in for some frames when it came back. The counts are now taken times the present rate over 60 (presents_for), and a texture is retired after two minutes without a sample instead of thirty seconds.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
NX2NAVI_STICK_SENS was served to the game as a multiplied camera pack at start only. A change during the run is now written into the game's memory: the StickSensitivity array as the game holds it, at the factor in effect, is looked for in the guest's heap and every copy is overwritten at the new factor. The game reads the array each time it steps the camera, so the speed follows at once. The copies found are remembered, so a later step of the menu's slider takes no search, and a search runs again a moment after the game opens the pack anew. On Ocarina 1.1.1 the first change of a run found 4 copies in about 2 s on its own thread, and the same stick push for a third of a second turned the camera about 30 degrees at 1, 90 at 3, 10 at 0.3 and 30 again at 1, all in one run.
NX2NAVI_AUDIO_CHANNELS was decided once. A change that gives another channel count now signals the device change events the game holds, as a console does when its output moves: the game asks GetActiveChannelCount again and mixes for the new count, and the mixer makes its SDL stream again with that count at its next render. On Ocarina 1.1.1 the centre input of the device sink went from 0.0006 rms to 0.013 within the 5 s after stereo became 5.1 and back to 0.0006 after stereo was set again, with no underrun. NX2NAVI_TRACE=audio logs the six inputs' levels with its level line.
Both rows lose their "after restart" note. The graphics card, widescreen, the resolution, the game's language, the button prompts and the game's native HDR still take a restart: the game or the Vulkan device reads them once while starting.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
When a device came or went, SDL's gamepad update first found every device again, 100 ms and more, on the game's
polling thread with the input lock held: a controller disconnecting gave five frames of 120 to 240 ms in a row, with
the game's other pollers queued on the lock. The pad thread now makes SDL's initialisation and every update. A poll
asks for an update and waits at most 2 ms for it; an ordinary one is done in microseconds and the poll reads fresh
state as before, and during a device search the poll goes on with the state it read last. Rumble, the motion samples
and the menu's stick reading skip a beat then instead of waiting.
--probe-input checks it on a virtual gamepad, with an update made to take 300 ms.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Every frame the render thread waited about 5 ms for the GPU after the frame's first submission, with the game
CPU-bound in every area. The wait is there so that the GPU has run that submission's passes before the game
rewrites what they read. But the submission also ends with the write-backs of what its shaders wrote, 60 MiB merged
into guest memory in 3 to 4 ms of GPU time, and the wait covered those too.
The write-backs now go into a part of their own. The part before them signals a second timeline, the executed
timeline, and the first-submission wait waits on that; the write-back part signals the timeline as before, so every
fence the game asks for still covers them, in the same queue order. wb_split = 0 keeps one part and the old wait.
Not measured in the game yet.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
In the settings menu a click anywhere on a row stepped its setting to the next value, and the left arrow stood left of the value's text, so it moved whenever a value of another width came up: clicking the left arrow through a list landed on the row at the second click and stepped the other way. Each stepper now has its arrows in white frames at fixed places, the left one the width of the row's widest value from the right one, and the mouse changes the value on those frames only; a click on the rest of the row selects it. On and off rows have the same arrows. An arrow at the end of its values is drawn faint and does nothing, and a button held on an arrow repeats as a held key does. A, Enter and left and right work as before.
NX2NAVI_MENU_TEST_CLICK clicks rows by their setting's name during a menu test run. On an RX 7900 XT at 3232x1352 the arrows stepped the performance overlay one value a click and stopped at both ends, and clicks on the body of four rows changed nothing.
HDR between off and the tone mapper now follows the menu. The HDR path is set up at every start (vk_hdr_armed): the swapchain colour space and metadata extensions, the tonemap splice and the settings in the support buffer, with the spliced tonemap returning the game's own SDR result while the swapchain is SDR. A change of the setting makes the swapchain again in the other format. On the same card a run that started with HDR off went to an HDR10 swapchain and back, and one that started with HDR on went to SDR and back, with the picture right in each state. The game's native HDR still waits for a restart, as the game asks about the display once, and the row says so. NX2NAVI_HDR_LIVE = 0 leaves the HDR path out of a run that starts with HDR off.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
A slot lookup's callers stamp what they keep with the generation read before the lookup. A lookup that takes a
released entry back for a slot registered since the release left such a stamp naming the released state, with the
entry as its result. When the game released the entry again the bucket came back to that state and got its
generation back, the stamp matched, and the slot was handed the released entry although it is stale by then: a
re-upload from storage the game may be unmapping. The state such a lookup leaves now loses its remembered
generation, so it gets a new one next time and the stamp never matches again. Found in review.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
The first version put a bucket's generation back only when a take-back undid the release just before it. A town run
with it showed half the take-backs going back and the fullest bucket (1,315 slots) still bumped 7,736 times per
3,600 submissions: the game keeps those textures released and takes them back for a moment, so every release was a
new generation and the pool refresh still refilled 5,220 slots per submission.
A bucket's state is now named by its epoch (changes other than a release or a take-back) and the XOR of the uids of
its released entries. A release or a take-back that brings the bucket to a state it was in before gets that state's
generation, whichever way round, and in any order of several entries; a new state gets a new one, never one used.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Above 60 fps players fell off moving platforms. The physics system takes its solver step count for a frame as
trunc(frames per update * 4 + 0.001): 4 at 60 fps and 8 at 30, the rates the game ships with, but 3 from 61 to 80
fps, 2 to 120, 1 to 240 (144 solver steps a second at 144 fps against 240 at 60), and 0 in a frame shorter than a
quarter of a 60 Hz frame. The solver skips its whole solve and sub-integration loop at 0, so such a frame resolves no
contact or friction and moves no rigid body. At a 240 fps limit, which "unlimited" paces at too, that was the frame
after every late one: the pacer keeps its phase, so the next display interval is shorter than the period.
The new patch set osolver rounds the count up, ceil(frames per update * 4 - 0.25): 4 and 8 as before, never fewer
steps a second than at 60 fps, at least 1. physics_steps = 0 gives the game's own count.
The step itself was the mean of the last five display intervals and changed with every frame: intervals of 5 and 30
ms in turn gave steps of 15 and 20 ms in turn, and one 60 ms frame at 200 fps took the step from 5 to 16 ms for five
frames. The game never saw a changing step on the console. The step is now the mean of the last 12 intervals without
the longest and the shortest, is the pacer's period when within 3% of it (at a 60 fps limit exactly one frame, every
frame), and repays the time the game was not given at up to a tenth of the step, so game time still follows the
clock. It is at least 1/480 s. step_steady = 0 gives the mean of five again. With trace = perf the fps lines show the
shortest and longest step and the time owed.
tests/frame_step_check.py drives frame_rate.c with made-up display times and the rest of the runtime stubbed.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>
Textures went dark for about a second all over the game. Under memory pressure a texture goes when it was released
120 presents ago or not sampled for 1,800, numbers set at 60 presents a second: without a limit the game presents
85 to 240, so that was half a second and 7 to 20 s. The thresholds now scale with the presents per second.
A pause screen, a menu or a fade draws next to nothing through the texture pool, and every texture of the scene
behind it counted as unsampled: eviction by disuse now waits until two mark reads in a row show the scene drawn.
A texture whose stand-in a shader sampled is on screen as that stand-in: it is made at the next refresh even when
the frame's creation time is spent, 32 of them a present, instead of waiting for a frame with time over.
Co-Authored-By: Claude Fable 5.2 <noreply@anthropic.com>