mirror of
https://github.com/tangerineturtle1/NX2navi.git
synced 2026-11-16 09:39:58 -04:00
framegen_multiplier (2, 3 or 4, live) sets how many frames the display gets per rendered frame while NVIDIA DLSS frame generation runs, and a DLSS multiplier row under Frame generation in the Screen tab sets it. nx2navi_dlssg.dll now passes that count to Streamline and reports the GPU's limit (numFramesToGenerateMax) through a new optional export, nx2sl_frames_max; with an older DLL the game keeps to 2x. A value above the limit is clamped to it with a log line, and the menu lists only what the GPU and driver allow, with a note saying why the rest are missing. The Frame generation row now says "in use: off" and why when DLSS frame generation was set but does not run. The pacer divides the frame limit by the multiplier in effect, as it already halved it for FSR 3.1, so the display gets the limit and VSync at the display's rate drops no generated frames; RivaTuner Statistics Server stays out while DLSS frame generation runs, since it counts generated frames. With DLSS 2x a limit of 60 now shows 60 on screen instead of 120. nx2navi_dlssg.dll has to be rebuilt (tools/build_dlssg.py) for 3x and 4x. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
74 lines
4.0 KiB
C
74 lines
4.0 KiB
C
// The C interface of nx2navi_dlssg.dll (runtime/dlssg/nx2_sl.cpp), which runtime/vk_dlssg.c loads for DLSS Frame
|
|
// Generation. The DLL is built with MSVC against NVIDIA's Streamline SDK (its C++ types have MSVC's ABI); nothing of
|
|
// the SDK is in this repository, and the game itself is built without it.
|
|
#pragma once
|
|
#include <stdint.h>
|
|
#include <vulkan/vulkan.h>
|
|
|
|
#define NX2SL_VERSION 3
|
|
|
|
typedef struct {
|
|
VkImage image;
|
|
VkImageView view;
|
|
VkFormat format;
|
|
uint32_t width, height;
|
|
VkImageLayout layout; // the layout it is in when Streamline reads it (at the present)
|
|
VkImageUsageFlags usage;
|
|
} Nx2SlImage;
|
|
|
|
typedef struct {
|
|
float view_to_clip[16], clip_to_view[16], clip_to_prev_clip[16], prev_clip_to_clip[16]; // row-major
|
|
float pos[3], up[3], right[3], fwd[3];
|
|
float znear, zfar, fov_y, aspect;
|
|
float jitter[2]; // render pixels
|
|
float mv_scale[2]; // what makes the motion vectors fractions of the render size
|
|
int reset;
|
|
} Nx2SlCamera;
|
|
|
|
typedef void (*Nx2SlLog)(const char *line);
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
#ifdef NX2SL_BUILD
|
|
#define NX2SL_API __declspec(dllexport)
|
|
#else
|
|
#define NX2SL_API
|
|
#endif
|
|
typedef int (*PFN_nx2sl_version)(void);
|
|
// slInit with DLSS-G, Reflex and PCL for Vulkan; dir: the folder of sl.interposer.dll and the plugins (the game's)
|
|
typedef int (*PFN_nx2sl_init)(const wchar_t *dir, Nx2SlLog log);
|
|
// The interposer's proc address functions: vkCreateInstance and vkCreateDevice through them add what DLSS-G needs
|
|
// (extensions, features, queues) and tell Streamline the device; the swapchain functions through them are its hooks.
|
|
typedef PFN_vkGetInstanceProcAddr (*PFN_nx2sl_instance_proc)(void);
|
|
typedef PFN_vkGetDeviceProcAddr (*PFN_nx2sl_device_proc)(void);
|
|
// 1 when DLSS-G loaded and supports this GPU (after the device exists)
|
|
typedef int (*PFN_nx2sl_available)(void);
|
|
// Reflex's low-latency mode, 0 off, 1 on, 2 on with boost: after the device, and after each swapchain the game creates
|
|
// through the interposer (the mode is the swapchain's)
|
|
typedef void (*PFN_nx2sl_reflex)(int mode);
|
|
// Frames are numbered by the game's presents: frame n ends with its n-th present (vk_dlssg.c vk_dlssg_game_present).
|
|
// Where the game starts a frame: with hold, Reflex's sleep, which holds the start until the time the driver computes
|
|
// from the measured render and queue times; then the frame's simulation and render-submit-start markers.
|
|
typedef void (*PFN_nx2sl_sleep)(uint32_t frame, int hold);
|
|
// The frame's submissions went out (at the game's present; with asynchronous replay, when the replay reaches it): its
|
|
// render-submit-end marker.
|
|
typedef void (*PFN_nx2sl_submit_end)(uint32_t frame);
|
|
// Each host present, before the present call: the frame's constants and tags, and frame generation on or off. enable is
|
|
// the number of frames to generate between two rendered ones (0 off; 1, 2 or 3 for 2x, 3x or 4x), at most what
|
|
// nx2sl_frames_max reports; a DLL without nx2sl_frames_max (an older build) generates one for any nonzero value. Then
|
|
// nx2sl_present_marker(0) before and (1) after the present.
|
|
typedef int (*PFN_nx2sl_frame)(VkCommandBuffer cb, const Nx2SlImage *depth, const Nx2SlImage *mv, const Nx2SlImage *hudless,
|
|
const Nx2SlCamera *cam, uint32_t out_w, uint32_t out_h, int enable, uint32_t frame);
|
|
// The most frames DLSS-G can generate between two rendered ones on this GPU and driver (Streamline's
|
|
// numFramesToGenerateMax: 1 on a GPU that does 2x, 3 on one that does 4x); 0 until Streamline reports it. Asked after
|
|
// the device exists and refreshed after each present. Optional: an older DLL lacks it, and the game then asks for one.
|
|
typedef uint32_t (*PFN_nx2sl_frames_max)(void);
|
|
typedef void (*PFN_nx2sl_present_marker)(int after, uint32_t frame);
|
|
// The frames the display got, generated ones included, counted after each present (on the present thread)
|
|
typedef uint64_t (*PFN_nx2sl_shown)(void);
|
|
typedef void (*PFN_nx2sl_shutdown)(void);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|