mirror of
https://github.com/tangerineturtle1/NX2navi.git
synced 2026-11-21 10:09:59 -04:00
Stop the replay from searching the environment on every draw, remember setting lookups, and spread texture streaming over more frames.
The draw path called getenv("NX2NAVI_SKIP_PROG") for each of ~2,000 draws a frame, and getenv walks the whole environment block: in a replay-thread profile it was a sixth of the samples. That switch, the polygon offset log and the ASTC alpha probe now read the environment once. The replay's cost per draw went from 3.7-5.0 us to 1.2-2.8 us in play, and the mean frame rate by minute from 60-131 fps to 103-243 fps (different places in each run, so the figures are approximate).
cfg_get and cfg_value keep each thread's answers per name until the settings version changes (cfg_set, cfg_reset, cfg_load, and cfg_setenv, which the code that sets NX2NAVI_ variables in the process's own environment now uses); NX2NAVI_CFG_MEMO=0 asks every time.
The texture pool creates at most pool_create_budget (NX2NAVI_POOL_CREATE_BUDGET, default 16, was a fixed 64) new texture entries per refresh. The refresh holds the texture lock throughout, and streaming new textures in made 20-40 ms frames; at 16 the lock was held 5 ms per slow frame instead of 24 in a dense area, and the frames over 25 ms in a heavy minute fell from 111-188 to 89, with no pop-in seen.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
@@ -477,3 +477,7 @@
|
|||||||
# "ref" is perf_lock_timing_here, which the link map names), the recorder's waits, and the texture lock's holds over
|
# "ref" is perf_lock_timing_here, which the link map names), the recorder's waits, and the texture lock's holds over
|
||||||
# 1 ms. Off by default.
|
# 1 ms. Off by default.
|
||||||
# lock_time = 0
|
# lock_time = 0
|
||||||
|
# Texture entries the bindless texture pool may create in one refresh (images and their uploads); the rest wait for
|
||||||
|
# the next refresh and show their stand-in until then. Lower spreads streaming over more frames (smaller hitches, a
|
||||||
|
# frame or two of pop-in); higher loads sooner.
|
||||||
|
# pool_create_budget = 16
|
||||||
|
|||||||
@@ -13,6 +13,7 @@
|
|||||||
#include <stdlib.h>
|
#include <stdlib.h>
|
||||||
#include <string.h>
|
#include <string.h>
|
||||||
|
|
||||||
|
#include "cfg.h"
|
||||||
#include "platform/platform.h"
|
#include "platform/platform.h"
|
||||||
#include "host.h"
|
#include "host.h"
|
||||||
#include "tex.h"
|
#include "tex.h"
|
||||||
@@ -560,7 +561,7 @@ static void timing(VkCtx *c, uint32_t bw, uint32_t bh) {
|
|||||||
}
|
}
|
||||||
|
|
||||||
int probe_astc(void) {
|
int probe_astc(void) {
|
||||||
plat_setenv("NX2NAVI_ASTC_BC", "1"); // also builds the BC3 encoder; the RGBA8 cases pass bc 0 and do not use it
|
cfg_setenv("NX2NAVI_ASTC_BC", "1"); // also builds the BC3 encoder; the RGBA8 cases pass bc 0 and do not use it
|
||||||
if (!vk_init()) { printf("probe-astc: FAIL vk_init\n"); return 1; }
|
if (!vk_init()) { printf("probe-astc: FAIL vk_init\n"); return 1; }
|
||||||
VkCtx *c = vk_ctx();
|
VkCtx *c = vk_ctx();
|
||||||
printf("probe-astc: GPU %s, textureCompressionASTC_LDR %d, mode %d\n", c->props.deviceName, c->has_astc_ldr,
|
printf("probe-astc: GPU %s, textureCompressionASTC_LDR %d, mode %d\n", c->props.deviceName, c->has_astc_ldr,
|
||||||
|
|||||||
@@ -66,7 +66,7 @@ static const char *const known[] = {
|
|||||||
"ZSTD_CHECK", "ZSTD_NATIVE",
|
"ZSTD_CHECK", "ZSTD_NATIVE",
|
||||||
"BIND_REUSE", "DYN_DELTA", "STG_ARENA", "SUBMIT_BATCH", "ASTC_GPU_DESWIZZLE", "ASTC_SCRATCH_KEEP", "ASTC_ARENA",
|
"BIND_REUSE", "DYN_DELTA", "STG_ARENA", "SUBMIT_BATCH", "ASTC_GPU_DESWIZZLE", "ASTC_SCRATCH_KEEP", "ASTC_ARENA",
|
||||||
"TEXUP_LOG_MS", "DYN_RES", "DYN_RES_TARGET", "DYN_RES_STEP",
|
"TEXUP_LOG_MS", "DYN_RES", "DYN_RES_TARGET", "DYN_RES_STEP",
|
||||||
"RECORDER_CORE", "RECORDER_PRIO", "REPLAY_TIME", "LOCK_TIME",
|
"RECORDER_CORE", "RECORDER_PRIO", "REPLAY_TIME", "LOCK_TIME", "POOL_CREATE_BUDGET",
|
||||||
};
|
};
|
||||||
|
|
||||||
// The nx2navi.ini section a key cfg_set may write goes to when the file lacks it (nx2navi.ini.example's sections).
|
// The nx2navi.ini section a key cfg_set may write goes to when the file lacks it (nx2navi.ini.example's sections).
|
||||||
@@ -105,7 +105,7 @@ static const struct { const char *key, *section; } sections[] = {
|
|||||||
{"DYN_RES", "performance"}, {"DYN_RES_TARGET", "performance"}, {"DYN_RES_STEP", "performance"},
|
{"DYN_RES", "performance"}, {"DYN_RES_TARGET", "performance"}, {"DYN_RES_STEP", "performance"},
|
||||||
{"RECORDER_CORE", "performance"}, {"RECORDER_PRIO", "performance"}, {"BIND_REUSE", "performance"},
|
{"RECORDER_CORE", "performance"}, {"RECORDER_PRIO", "performance"}, {"BIND_REUSE", "performance"},
|
||||||
{"DYN_DELTA", "performance"}, {"STG_ARENA", "performance"}, {"SUBMIT_BATCH", "performance"},
|
{"DYN_DELTA", "performance"}, {"STG_ARENA", "performance"}, {"SUBMIT_BATCH", "performance"},
|
||||||
{"ASTC_GPU_DESWIZZLE", "performance"}, {"ASTC_SCRATCH_KEEP", "performance"}, {"ASTC_ARENA", "performance"},
|
{"ASTC_GPU_DESWIZZLE", "performance"}, {"ASTC_SCRATCH_KEEP", "performance"}, {"ASTC_ARENA", "performance"}, {"POOL_CREATE_BUDGET", "performance"},
|
||||||
{"TIMER_1MS", "performance"}, {"PIPE_WAIT", "performance"}, {"PIPE_SKIP", "performance"},
|
{"TIMER_1MS", "performance"}, {"PIPE_WAIT", "performance"}, {"PIPE_SKIP", "performance"},
|
||||||
{"LIB_PREBUILD", "performance"}, {"LIB_PREBUILD_THREADS", "performance"}, {"PIPE_PREBUILD", "performance"},
|
{"LIB_PREBUILD", "performance"}, {"LIB_PREBUILD_THREADS", "performance"}, {"PIPE_PREBUILD", "performance"},
|
||||||
{"PREWARM_XLATE", "performance"}, {"GPL", "performance"}, {"ASTC", "performance"}, {"MEMORY", "performance"},
|
{"PREWARM_XLATE", "performance"}, {"GPL", "performance"}, {"ASTC", "performance"}, {"MEMORY", "performance"},
|
||||||
@@ -190,7 +190,7 @@ static const CfgMeta metas[] = {
|
|||||||
{"DYN_RES", "0", "0|1", LIVE}, {"DYN_RES_TARGET", "16.7", "1..100", LIVE}, {"DYN_RES_STEP", "45", "8..600", LIVE},
|
{"DYN_RES", "0", "0|1", LIVE}, {"DYN_RES_TARGET", "16.7", "1..100", LIVE}, {"DYN_RES_STEP", "45", "8..600", LIVE},
|
||||||
// the recording thread: a core of its own (auto: with 12 or more logical processors) and the highest priority
|
// the recording thread: a core of its own (auto: with 12 or more logical processors) and the highest priority
|
||||||
// (vk_exec.c vk_exec_record)
|
// (vk_exec.c vk_exec_record)
|
||||||
{"RECORDER_CORE", "auto", "auto|0|1", RESTART}, {"RECORDER_PRIO", "1", "0|1", RESTART}, {"REPLAY_TIME", "0", "0|1", RESTART}, {"LOCK_TIME", "0", "0|1", RESTART},
|
{"RECORDER_CORE", "auto", "auto|0|1", RESTART}, {"RECORDER_PRIO", "1", "0|1", RESTART}, {"REPLAY_TIME", "0", "0|1", RESTART}, {"LOCK_TIME", "0", "0|1", RESTART}, {"POOL_CREATE_BUDGET", "16", "1..4096", RESTART},
|
||||||
// held submissions handed to the queue together (vk_sync.c, submit batching)
|
// held submissions handed to the queue together (vk_sync.c, submit batching)
|
||||||
{"SUBMIT_BATCH", "4", "1..16", RESTART},
|
{"SUBMIT_BATCH", "4", "1..16", RESTART},
|
||||||
// shaders and pipelines
|
// shaders and pipelines
|
||||||
@@ -286,6 +286,7 @@ static void migrate(void) {
|
|||||||
|
|
||||||
int cfg_load(const char *path) {
|
int cfg_load(const char *path) {
|
||||||
clear();
|
clear();
|
||||||
|
__atomic_add_fetch(&version, 1, __ATOMIC_RELEASE); // the lookup memo (cfg_memo) forgets the freed strings
|
||||||
uint64_t size = 0;
|
uint64_t size = 0;
|
||||||
uint8_t *data = plat_file_read(path, &size);
|
uint8_t *data = plat_file_read(path, &size);
|
||||||
if (!data) return 0;
|
if (!data) return 0;
|
||||||
@@ -369,7 +370,7 @@ static const char *raw_get(const char *name) {
|
|||||||
return NULL;
|
return NULL;
|
||||||
}
|
}
|
||||||
|
|
||||||
const char *cfg_get(const char *name) {
|
static const char *cfg_get_now(const char *name) {
|
||||||
const char *v = raw_get(name);
|
const char *v = raw_get(name);
|
||||||
if (v || strncmp(name, PREFIX, PREFIX_LEN) || !profile_of()) return v;
|
if (v || strncmp(name, PREFIX, PREFIX_LEN) || !profile_of()) return v;
|
||||||
for (size_t i = 0; i < sizeof DECK / sizeof *DECK; i++)
|
for (size_t i = 0; i < sizeof DECK / sizeof *DECK; i++)
|
||||||
@@ -382,6 +383,12 @@ int cfg_is_set(const char *name) { return raw_get(name) != NULL; }
|
|||||||
|
|
||||||
unsigned cfg_version(void) { return __atomic_load_n(&version, __ATOMIC_ACQUIRE); }
|
unsigned cfg_version(void) { return __atomic_load_n(&version, __ATOMIC_ACQUIRE); }
|
||||||
|
|
||||||
|
int cfg_setenv(const char *name, const char *value) {
|
||||||
|
int ok = plat_setenv(name, value);
|
||||||
|
__atomic_add_fetch(&version, 1, __ATOMIC_RELEASE);
|
||||||
|
return ok;
|
||||||
|
}
|
||||||
|
|
||||||
int cfg_from_env(const char *name) { return getenv(name) != NULL; }
|
int cfg_from_env(const char *name) { return getenv(name) != NULL; }
|
||||||
|
|
||||||
void cfg_set(const char *name, const char *value) {
|
void cfg_set(const char *name, const char *value) {
|
||||||
@@ -473,14 +480,47 @@ const char *cfg_default(const char *key) {
|
|||||||
|
|
||||||
const CfgMeta *cfg_meta_at(int i) { return i >= 0 && (size_t)i < sizeof metas / sizeof *metas ? &metas[i] : NULL; }
|
const CfgMeta *cfg_meta_at(int i) { return i >= 0 && (size_t)i < sizeof metas / sizeof *metas ? &metas[i] : NULL; }
|
||||||
|
|
||||||
const char *cfg_value(const char *name) {
|
static const char *cfg_value_now(const char *name) {
|
||||||
const char *e = cfg_get(name);
|
const char *e = cfg_get_now(name);
|
||||||
if (e && *e) return e;
|
if (e && *e) return e;
|
||||||
const CfgMeta *m = cfg_meta(name);
|
const CfgMeta *m = cfg_meta(name);
|
||||||
if (!m) rt_fatal("cfg: %s has no row in the settings table", name);
|
if (!m) rt_fatal("cfg: %s has no row in the settings table", name);
|
||||||
return m->def;
|
return m->def;
|
||||||
}
|
}
|
||||||
|
|
||||||
|
// Lookup memo. cfg_get reads the environment (getenv walks the whole block comparing names) and then the file's
|
||||||
|
// entries and the settings table by name, and several per-draw paths ask for live settings: on the replay thread those
|
||||||
|
// lookups were about a sixth of the samples in a play profile (ucrtbase's string routines). Each thread keeps the
|
||||||
|
// answers it got per name until the settings version changes (cfg_set, cfg_reset, cfg_load); values stay valid that
|
||||||
|
// long because a set keeps the old string for readers and a load bumps the version. NX2NAVI_CFG_MEMO=0 (environment
|
||||||
|
// only, read once) asks every time.
|
||||||
|
#define CFG_MEMO_N 256
|
||||||
|
typedef struct { unsigned ver; uint32_t h; uint8_t kind; char name[55]; const char *v; } CfgMemo;
|
||||||
|
static _Thread_local CfgMemo cfg_memo[CFG_MEMO_N];
|
||||||
|
static int cfg_memo_on = -1;
|
||||||
|
|
||||||
|
static const char *cfg_memo_get(const char *name, int kind) {
|
||||||
|
if (cfg_memo_on < 0) {
|
||||||
|
const char *e = getenv(PREFIX "CFG_MEMO");
|
||||||
|
cfg_memo_on = !(e && !strcmp(e, "0"));
|
||||||
|
}
|
||||||
|
size_t len = strlen(name);
|
||||||
|
if (!cfg_memo_on || len >= sizeof cfg_memo[0].name) return kind ? cfg_value_now(name) : cfg_get_now(name);
|
||||||
|
uint32_t h = 2166136261u;
|
||||||
|
for (size_t i = 0; i < len; i++) h = (h ^ (uint8_t)name[i]) * 16777619u;
|
||||||
|
h = h * 2 + (uint32_t)kind;
|
||||||
|
CfgMemo *m = &cfg_memo[h % CFG_MEMO_N];
|
||||||
|
unsigned ver = __atomic_load_n(&version, __ATOMIC_ACQUIRE) + 1; // 0 marks an empty slot
|
||||||
|
if (m->ver == ver && m->h == h && m->kind == kind && !memcmp(m->name, name, len + 1)) return m->v;
|
||||||
|
const char *v = kind ? cfg_value_now(name) : cfg_get_now(name); // read after ver: a change meanwhile misses next time
|
||||||
|
m->ver = ver, m->h = h, m->kind = (uint8_t)kind, m->v = v;
|
||||||
|
memcpy(m->name, name, len + 1);
|
||||||
|
return v;
|
||||||
|
}
|
||||||
|
|
||||||
|
const char *cfg_get(const char *name) { return cfg_memo_get(name, 0); }
|
||||||
|
const char *cfg_value(const char *name) { return cfg_memo_get(name, 1); }
|
||||||
|
|
||||||
// The row's default as a number, for a set value that does not parse.
|
// The row's default as a number, for a set value that does not parse.
|
||||||
static double default_number(const char *name) {
|
static double default_number(const char *name) {
|
||||||
return strtod(cfg_meta(name)->def, NULL);
|
return strtod(cfg_meta(name)->def, NULL);
|
||||||
|
|||||||
@@ -19,6 +19,8 @@ void cfg_set(const char *name, const char *value);
|
|||||||
// Bumped by every cfg_set. A consumer that keeps a parsed value compares this with the number it last saw (one atomic
|
// Bumped by every cfg_set. A consumer that keeps a parsed value compares this with the number it last saw (one atomic
|
||||||
// load) and parses again when it changed.
|
// load) and parses again when it changed.
|
||||||
unsigned cfg_version(void);
|
unsigned cfg_version(void);
|
||||||
|
// plat_setenv for an NX2NAVI_ variable the process reads back: also bumps cfg_version, so lookups see the new value.
|
||||||
|
int cfg_setenv(const char *name, const char *value);
|
||||||
// 1 when the environment sets name: cfg_set cannot change what cfg_get returns (the menu greys the setting out).
|
// 1 when the environment sets name: cfg_set cannot change what cfg_get returns (the menu greys the setting out).
|
||||||
int cfg_from_env(const char *name);
|
int cfg_from_env(const char *name);
|
||||||
// 1 when the player set name (the environment or nx2navi.ini), 0 when cfg_get gives a device profile's default or NULL.
|
// 1 when the player set name (the environment or nx2navi.ini), 0 when cfg_get gives a device profile's default or NULL.
|
||||||
|
|||||||
@@ -36,8 +36,8 @@ int probe_cfg(void) {
|
|||||||
"no_such_setting = 1\r\n"
|
"no_such_setting = 1\r\n"
|
||||||
"no equals sign\r\n"
|
"no equals sign\r\n"
|
||||||
"last = no newline at the end";
|
"last = no newline at the end";
|
||||||
plat_setenv("NX2NAVI_LOCALE", NULL);
|
cfg_setenv("NX2NAVI_LOCALE", NULL);
|
||||||
plat_setenv("NX2NAVI_FPS60", NULL);
|
cfg_setenv("NX2NAVI_FPS60", NULL);
|
||||||
CHECK(plat_file_write(path, ini, sizeof ini - 1), "write the probe ini");
|
CHECK(plat_file_write(path, ini, sizeof ini - 1), "write the probe ini");
|
||||||
CHECK(cfg_load(path) == 1, "load the probe ini");
|
CHECK(cfg_load(path) == 1, "load the probe ini");
|
||||||
CHECK(EQ(cfg_get("NX2NAVI_FPS60"), "0"), "value read, whitespace trimmed, lower-case key");
|
CHECK(EQ(cfg_get("NX2NAVI_FPS60"), "0"), "value read, whitespace trimmed, lower-case key");
|
||||||
@@ -49,9 +49,9 @@ int probe_cfg(void) {
|
|||||||
CHECK(cfg_get("NX2NAVI_CLOTH_REALTIME") == NULL, "absent key is NULL");
|
CHECK(cfg_get("NX2NAVI_CLOTH_REALTIME") == NULL, "absent key is NULL");
|
||||||
CHECK(cfg_get("NX2NAVI_comment") == NULL, "comment is not a key");
|
CHECK(cfg_get("NX2NAVI_comment") == NULL, "comment is not a key");
|
||||||
CHECK(EQ(cfg_get("NX2NAVI_NO_SUCH_SETTING"), "1"), "unknown key is still readable");
|
CHECK(EQ(cfg_get("NX2NAVI_NO_SUCH_SETTING"), "1"), "unknown key is still readable");
|
||||||
plat_setenv("NX2NAVI_FPS60", "1");
|
cfg_setenv("NX2NAVI_FPS60", "1");
|
||||||
CHECK(EQ(cfg_get("NX2NAVI_FPS60"), "1"), "environment overrides the file");
|
CHECK(EQ(cfg_get("NX2NAVI_FPS60"), "1"), "environment overrides the file");
|
||||||
plat_setenv("NX2NAVI_FPS60", NULL);
|
cfg_setenv("NX2NAVI_FPS60", NULL);
|
||||||
CHECK(EQ(cfg_get("NX2NAVI_FPS60"), "0"), "file value returns when the variable is removed");
|
CHECK(EQ(cfg_get("NX2NAVI_FPS60"), "0"), "file value returns when the variable is removed");
|
||||||
plat_file_delete(path);
|
plat_file_delete(path);
|
||||||
CHECK(cfg_load(path) == 0, "missing file is not an error");
|
CHECK(cfg_load(path) == 0, "missing file is not an error");
|
||||||
@@ -91,9 +91,9 @@ int probe_cfg(void) {
|
|||||||
"\r\n"
|
"\r\n"
|
||||||
"[audio]\r\n"
|
"[audio]\r\n"
|
||||||
"volume = 40\r\n";
|
"volume = 40\r\n";
|
||||||
plat_setenv("NX2NAVI_MOTION", NULL);
|
cfg_setenv("NX2NAVI_MOTION", NULL);
|
||||||
plat_setenv("NX2NAVI_VOLUME", NULL);
|
cfg_setenv("NX2NAVI_VOLUME", NULL);
|
||||||
plat_setenv("NX2NAVI_RUMBLE_STRENGTH", NULL);
|
cfg_setenv("NX2NAVI_RUMBLE_STRENGTH", NULL);
|
||||||
CHECK(plat_file_write(path, before, sizeof before - 1), "write the save ini");
|
CHECK(plat_file_write(path, before, sizeof before - 1), "write the save ini");
|
||||||
CHECK(cfg_load(path) == 1, "load the save ini");
|
CHECK(cfg_load(path) == 1, "load the save ini");
|
||||||
unsigned v0 = cfg_version();
|
unsigned v0 = cfg_version();
|
||||||
@@ -118,11 +118,11 @@ int probe_cfg(void) {
|
|||||||
EQ(cfg_get("NX2NAVI_RUMBLE_STRENGTH"), "80") && EQ(cfg_get("NX2NAVI_VOLUME"), "40") &&
|
EQ(cfg_get("NX2NAVI_RUMBLE_STRENGTH"), "80") && EQ(cfg_get("NX2NAVI_VOLUME"), "40") &&
|
||||||
EQ(cfg_get("NX2NAVI_ROMFS_MODS"), "C:\\mods"), "the saved file reads back");
|
EQ(cfg_get("NX2NAVI_ROMFS_MODS"), "C:\\mods"), "the saved file reads back");
|
||||||
const char *held = cfg_get("NX2NAVI_VOLUME");
|
const char *held = cfg_get("NX2NAVI_VOLUME");
|
||||||
plat_setenv("NX2NAVI_VOLUME", "70");
|
cfg_setenv("NX2NAVI_VOLUME", "70");
|
||||||
cfg_set("NX2NAVI_VOLUME", "90");
|
cfg_set("NX2NAVI_VOLUME", "90");
|
||||||
CHECK(cfg_from_env("NX2NAVI_VOLUME") && EQ(cfg_get("NX2NAVI_VOLUME"), "70"), "environment wins over cfg_set");
|
CHECK(cfg_from_env("NX2NAVI_VOLUME") && EQ(cfg_get("NX2NAVI_VOLUME"), "70"), "environment wins over cfg_set");
|
||||||
CHECK(EQ(held, "40"), "a pointer cfg_get handed out stays valid after cfg_set");
|
CHECK(EQ(held, "40"), "a pointer cfg_get handed out stays valid after cfg_set");
|
||||||
plat_setenv("NX2NAVI_VOLUME", NULL);
|
cfg_setenv("NX2NAVI_VOLUME", NULL);
|
||||||
CHECK(!cfg_from_env("NX2NAVI_VOLUME") && EQ(cfg_get("NX2NAVI_VOLUME"), "90"), "cfg_set value returns without the variable");
|
CHECK(!cfg_from_env("NX2NAVI_VOLUME") && EQ(cfg_get("NX2NAVI_VOLUME"), "90"), "cfg_set value returns without the variable");
|
||||||
plat_file_delete(path);
|
plat_file_delete(path);
|
||||||
CHECK(cfg_save_to(path) == 1, "cfg_save_to creates a missing file");
|
CHECK(cfg_save_to(path) == 1, "cfg_save_to creates a missing file");
|
||||||
@@ -161,7 +161,7 @@ int probe_cfg(void) {
|
|||||||
// cfg_reset: the key's active lines leave nx2navi.ini, the commented example stays
|
// cfg_reset: the key's active lines leave nx2navi.ini, the commented example stays
|
||||||
static const char rbase[] = "[audio]\n# volume = 100\n[input]\nmotion = 0\n";
|
static const char rbase[] = "[audio]\n# volume = 100\n[input]\nmotion = 0\n";
|
||||||
static const char *const vol[] = {"VOLUME"};
|
static const char *const vol[] = {"VOLUME"};
|
||||||
plat_setenv("NX2NAVI_VOLUME", NULL);
|
cfg_setenv("NX2NAVI_VOLUME", NULL);
|
||||||
CHECK(plat_file_write(path, rbase, sizeof rbase - 1), "write the reset ini");
|
CHECK(plat_file_write(path, rbase, sizeof rbase - 1), "write the reset ini");
|
||||||
CHECK(cfg_load(path) == 1, "load the reset ini");
|
CHECK(cfg_load(path) == 1, "load the reset ini");
|
||||||
cfg_set("NX2NAVI_VOLUME", "40");
|
cfg_set("NX2NAVI_VOLUME", "40");
|
||||||
@@ -200,9 +200,9 @@ int probe_cfg(void) {
|
|||||||
|
|
||||||
// a key the environment sets is skipped and keeps its file line
|
// a key the environment sets is skipped and keeps its file line
|
||||||
CHECK(cfg_load(path) == 1 && EQ(cfg_get("NX2NAVI_VOLUME"), "60"), "reset: reload");
|
CHECK(cfg_load(path) == 1 && EQ(cfg_get("NX2NAVI_VOLUME"), "60"), "reset: reload");
|
||||||
plat_setenv("NX2NAVI_VOLUME", "70");
|
cfg_setenv("NX2NAVI_VOLUME", "70");
|
||||||
CHECK(cfg_reset(vol, 1) == 0, "reset: an environment-set key is skipped");
|
CHECK(cfg_reset(vol, 1) == 0, "reset: an environment-set key is skipped");
|
||||||
plat_setenv("NX2NAVI_VOLUME", NULL);
|
cfg_setenv("NX2NAVI_VOLUME", NULL);
|
||||||
CHECK(EQ(cfg_get("NX2NAVI_VOLUME"), "60"), "reset: the skipped key keeps its value");
|
CHECK(EQ(cfg_get("NX2NAVI_VOLUME"), "60"), "reset: the skipped key keeps its value");
|
||||||
CHECK(cfg_save_to(path) == 1, "reset: save after a skip");
|
CHECK(cfg_save_to(path) == 1, "reset: save after a skip");
|
||||||
got = plat_file_read(path, &got_n);
|
got = plat_file_read(path, &got_n);
|
||||||
@@ -295,19 +295,19 @@ int probe_cfg(void) {
|
|||||||
"pad stick: a square gate's corner stays on the unit circle");
|
"pad stick: a square gate's corner stays on the unit circle");
|
||||||
input_pad_stick(0, 32767 / 2 + 1, 0.2f, st);
|
input_pad_stick(0, 32767 / 2 + 1, 0.2f, st);
|
||||||
CHECK(abs(st[1] - 32767 * 3 / 8) <= 3, "pad stick: half deflection past a 20% zone is (0.5 - 0.2) / 0.8 of full");
|
CHECK(abs(st[1] - 32767 * 3 / 8) <= 3, "pad stick: half deflection past a 20% zone is (0.5 - 0.2) / 0.8 of full");
|
||||||
plat_setenv("NX2NAVI_STICK_DEADZONE", "12");
|
cfg_setenv("NX2NAVI_STICK_DEADZONE", "12");
|
||||||
plat_setenv("NX2NAVI_LSTICK_DEADZONE", NULL);
|
cfg_setenv("NX2NAVI_LSTICK_DEADZONE", NULL);
|
||||||
plat_setenv("NX2NAVI_RSTICK_DEADZONE", NULL);
|
cfg_setenv("NX2NAVI_RSTICK_DEADZONE", NULL);
|
||||||
CHECK(fabsf(input_pad_deadzone(0) - 0.12f) < 1e-6f && fabsf(input_pad_deadzone(1) - 0.12f) < 1e-6f,
|
CHECK(fabsf(input_pad_deadzone(0) - 0.12f) < 1e-6f && fabsf(input_pad_deadzone(1) - 0.12f) < 1e-6f,
|
||||||
"pad dead zone: both sticks follow stick_deadzone while lstick/rstick are unset");
|
"pad dead zone: both sticks follow stick_deadzone while lstick/rstick are unset");
|
||||||
plat_setenv("NX2NAVI_RSTICK_DEADZONE", "20");
|
cfg_setenv("NX2NAVI_RSTICK_DEADZONE", "20");
|
||||||
CHECK(fabsf(input_pad_deadzone(0) - 0.12f) < 1e-6f && fabsf(input_pad_deadzone(1) - 0.20f) < 1e-6f,
|
CHECK(fabsf(input_pad_deadzone(0) - 0.12f) < 1e-6f && fabsf(input_pad_deadzone(1) - 0.20f) < 1e-6f,
|
||||||
"pad dead zone: rstick_deadzone sets the right stick alone");
|
"pad dead zone: rstick_deadzone sets the right stick alone");
|
||||||
plat_setenv("NX2NAVI_LSTICK_DEADZONE", "80");
|
cfg_setenv("NX2NAVI_LSTICK_DEADZONE", "80");
|
||||||
CHECK(fabsf(input_pad_deadzone(0) - 0.5f) < 1e-6f, "pad dead zone: clamped to 50%");
|
CHECK(fabsf(input_pad_deadzone(0) - 0.5f) < 1e-6f, "pad dead zone: clamped to 50%");
|
||||||
plat_setenv("NX2NAVI_STICK_DEADZONE", NULL);
|
cfg_setenv("NX2NAVI_STICK_DEADZONE", NULL);
|
||||||
plat_setenv("NX2NAVI_LSTICK_DEADZONE", NULL);
|
cfg_setenv("NX2NAVI_LSTICK_DEADZONE", NULL);
|
||||||
plat_setenv("NX2NAVI_RSTICK_DEADZONE", NULL);
|
cfg_setenv("NX2NAVI_RSTICK_DEADZONE", NULL);
|
||||||
CHECK(input_stick_percent(32767, 0) > 99.99 && input_stick_percent(32767, 0) < 100.01 &&
|
CHECK(input_stick_percent(32767, 0) > 99.99 && input_stick_percent(32767, 0) < 100.01 &&
|
||||||
input_stick_percent(0, 0) == 0 && fabs(input_stick_percent(3000, -4000) - 5000 * 100.0 / 32767) < 1e-9,
|
input_stick_percent(0, 0) == 0 && fabs(input_stick_percent(3000, -4000) - 5000 * 100.0 / 32767) < 1e-9,
|
||||||
"stick percent: an axis's end is 100%, the centre 0%, round in between");
|
"stick percent: an axis's end is 100%, the centre 0%, round in between");
|
||||||
@@ -449,27 +449,27 @@ int probe_cfg(void) {
|
|||||||
CHECK(!strcmp(line, "none"), "edit: a stick direction without keys is none");
|
CHECK(!strcmp(line, "none"), "edit: a stick direction without keys is none");
|
||||||
// defaults live in the CfgMeta table: cfg_value and the typed accessors fall back to it
|
// defaults live in the CfgMeta table: cfg_value and the typed accessors fall back to it
|
||||||
cfg_load("cfg-probe-missing.ini");
|
cfg_load("cfg-probe-missing.ini");
|
||||||
plat_setenv("NX2NAVI_FPS60", NULL);
|
cfg_setenv("NX2NAVI_FPS60", NULL);
|
||||||
plat_setenv("NX2NAVI_MOUSE_SENS", NULL);
|
cfg_setenv("NX2NAVI_MOUSE_SENS", NULL);
|
||||||
plat_setenv("NX2NAVI_FREE_CORES", NULL);
|
cfg_setenv("NX2NAVI_FREE_CORES", NULL);
|
||||||
CHECK(cfg_bool("NX2NAVI_FPS60") == 1, "default: unset FPS60 is on");
|
CHECK(cfg_bool("NX2NAVI_FPS60") == 1, "default: unset FPS60 is on");
|
||||||
CHECK(EQ(cfg_value("NX2NAVI_VK_PRESENT"), "mailbox") && cfg_int("NX2NAVI_SPLIT_DRAWS") == 64, "default: text and integer");
|
CHECK(EQ(cfg_value("NX2NAVI_VK_PRESENT"), "mailbox") && cfg_int("NX2NAVI_SPLIT_DRAWS") == 64, "default: text and integer");
|
||||||
plat_setenv("NX2NAVI_MOUSE_SENS", "2.5");
|
cfg_setenv("NX2NAVI_MOUSE_SENS", "2.5");
|
||||||
CHECK(cfg_double("NX2NAVI_MOUSE_SENS") == 2.5, "double: the environment value");
|
CHECK(cfg_double("NX2NAVI_MOUSE_SENS") == 2.5, "double: the environment value");
|
||||||
plat_setenv("NX2NAVI_MOUSE_SENS", "fast");
|
cfg_setenv("NX2NAVI_MOUSE_SENS", "fast");
|
||||||
CHECK(cfg_double("NX2NAVI_MOUSE_SENS") == 1.0, "double: a value that does not parse gives the default");
|
CHECK(cfg_double("NX2NAVI_MOUSE_SENS") == 1.0, "double: a value that does not parse gives the default");
|
||||||
plat_setenv("NX2NAVI_MOUSE_SENS", NULL);
|
cfg_setenv("NX2NAVI_MOUSE_SENS", NULL);
|
||||||
cfg_set("NX2NAVI_MOUSE_SENS", "3");
|
cfg_set("NX2NAVI_MOUSE_SENS", "3");
|
||||||
CHECK(cfg_double("NX2NAVI_MOUSE_SENS") == 3.0 && cfg_int("NX2NAVI_MOUSE_SENS") == 3, "a cfg_set value beats the default");
|
CHECK(cfg_double("NX2NAVI_MOUSE_SENS") == 3.0 && cfg_int("NX2NAVI_MOUSE_SENS") == 3, "a cfg_set value beats the default");
|
||||||
CHECK(cfg_bool("NX2NAVI_FREE_CORES") == 0, "free_cores unset: off");
|
CHECK(cfg_bool("NX2NAVI_FREE_CORES") == 0, "free_cores unset: off");
|
||||||
plat_setenv("NX2NAVI_FREE_CORES", "0");
|
cfg_setenv("NX2NAVI_FREE_CORES", "0");
|
||||||
CHECK(cfg_bool("NX2NAVI_FREE_CORES") == 0, "free_cores 0 gives the same as unset");
|
CHECK(cfg_bool("NX2NAVI_FREE_CORES") == 0, "free_cores 0 gives the same as unset");
|
||||||
plat_setenv("NX2NAVI_FREE_CORES", "1");
|
cfg_setenv("NX2NAVI_FREE_CORES", "1");
|
||||||
CHECK(cfg_bool("NX2NAVI_FREE_CORES") == 1, "free_cores 1: on");
|
CHECK(cfg_bool("NX2NAVI_FREE_CORES") == 1, "free_cores 1: on");
|
||||||
plat_setenv("NX2NAVI_FREE_CORES", NULL);
|
cfg_setenv("NX2NAVI_FREE_CORES", NULL);
|
||||||
// 0.1.9's pad_layout = xbox_prompts (cfg.c migrate): read as the Nintendo layout with the Xbox prompts, saved so
|
// 0.1.9's pad_layout = xbox_prompts (cfg.c migrate): read as the Nintendo layout with the Xbox prompts, saved so
|
||||||
plat_setenv("NX2NAVI_PAD_LAYOUT", NULL);
|
cfg_setenv("NX2NAVI_PAD_LAYOUT", NULL);
|
||||||
plat_setenv("NX2NAVI_PROMPTS", NULL);
|
cfg_setenv("NX2NAVI_PROMPTS", NULL);
|
||||||
static const char old_layout[] = "[input]\r\npad_layout = xbox_prompts\r\n";
|
static const char old_layout[] = "[input]\r\npad_layout = xbox_prompts\r\n";
|
||||||
CHECK(plat_file_write(path, old_layout, sizeof old_layout - 1) && cfg_load(path) == 1 &&
|
CHECK(plat_file_write(path, old_layout, sizeof old_layout - 1) && cfg_load(path) == 1 &&
|
||||||
EQ(cfg_get("NX2NAVI_PAD_LAYOUT"), "nintendo") && EQ(cfg_get("NX2NAVI_PROMPTS"), "xbox"),
|
EQ(cfg_get("NX2NAVI_PAD_LAYOUT"), "nintendo") && EQ(cfg_get("NX2NAVI_PROMPTS"), "xbox"),
|
||||||
@@ -493,7 +493,7 @@ int probe_cfg(void) {
|
|||||||
listed++;
|
listed++;
|
||||||
char name[96];
|
char name[96];
|
||||||
snprintf(name, sizeof name, "NX2NAVI_%s", m->key);
|
snprintf(name, sizeof name, "NX2NAVI_%s", m->key);
|
||||||
plat_setenv(name, "");
|
cfg_setenv(name, "");
|
||||||
CHECK(EQ(cfg_value(name), m->def), "cfg_value returns the table default");
|
CHECK(EQ(cfg_value(name), m->def), "cfg_value returns the table default");
|
||||||
int ok = 0;
|
int ok = 0;
|
||||||
if (!m->values) ok = 1;
|
if (!m->values) ok = 1;
|
||||||
|
|||||||
@@ -85,7 +85,7 @@ void gfx_window_closed(void) {
|
|||||||
rtss_limit_restore(); // RivaTuner Statistics Server's profile as it was
|
rtss_limit_restore(); // RivaTuner Statistics Server's profile as it was
|
||||||
fs_save_flush(); // last: the game's threads still run until plat_exit, and a Commit after this one is refused
|
fs_save_flush(); // last: the game's threads still run until plat_exit, and a Commit after this one is refused
|
||||||
if (restart) {
|
if (restart) {
|
||||||
plat_setenv("NX2NAVI_REEXEC", NULL); // the new process counts its own address-space retries (memory.c)
|
cfg_setenv("NX2NAVI_REEXEC", NULL); // the new process counts its own address-space retries (memory.c)
|
||||||
if (!plat_restart()) rt_log("gfx: the restart could not start the game again");
|
if (!plat_restart()) rt_log("gfx: the restart could not start the game again");
|
||||||
}
|
}
|
||||||
plat_exit(0);
|
plat_exit(0);
|
||||||
|
|||||||
@@ -7,6 +7,7 @@
|
|||||||
#include <stdlib.h>
|
#include <stdlib.h>
|
||||||
#include <string.h>
|
#include <string.h>
|
||||||
|
|
||||||
|
#include "cfg.h"
|
||||||
#include "gfx.h"
|
#include "gfx.h"
|
||||||
#include "host.h"
|
#include "host.h"
|
||||||
#include "platform/platform.h"
|
#include "platform/platform.h"
|
||||||
@@ -160,7 +161,7 @@ int probe_shader(void) {
|
|||||||
char tmp[PLAT_PATH_MAX];
|
char tmp[PLAT_PATH_MAX];
|
||||||
if (!plat_temp_dir(tmp, sizeof tmp)) strcpy(tmp, ".");
|
if (!plat_temp_dir(tmp, sizeof tmp)) strcpy(tmp, ".");
|
||||||
snprintf(dir, sizeof dir, "%s/nx2navi-shader-probe-%u", tmp, plat_process_id());
|
snprintf(dir, sizeof dir, "%s/nx2navi-shader-probe-%u", tmp, plat_process_id());
|
||||||
CHECK(plat_setenv("NX2NAVI_SHADER_CACHE", dir), "cannot set NX2NAVI_SHADER_CACHE");
|
CHECK(cfg_setenv("NX2NAVI_SHADER_CACHE", dir), "cannot set NX2NAVI_SHADER_CACHE");
|
||||||
|
|
||||||
// pass 1: translate through the service
|
// pass 1: translate through the service
|
||||||
const GfxShader *first[WANT];
|
const GfxShader *first[WANT];
|
||||||
|
|||||||
@@ -203,7 +203,7 @@ static void reexec_or_fail(const char *what) {
|
|||||||
if (n >= REEXEC_LIMIT) rt_fatal("memory: %s is not free after %d attempts", what, n);
|
if (n >= REEXEC_LIMIT) rt_fatal("memory: %s is not free after %d attempts", what, n);
|
||||||
char buf[16];
|
char buf[16];
|
||||||
snprintf(buf, sizeof buf, "%d", n + 1);
|
snprintf(buf, sizeof buf, "%d", n + 1);
|
||||||
plat_setenv("NX2NAVI_REEXEC", buf);
|
cfg_setenv("NX2NAVI_REEXEC", buf);
|
||||||
plat_reexec();
|
plat_reexec();
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|||||||
@@ -998,9 +998,10 @@ NVN_API(nvnCommandBufferSetStencilRef) {
|
|||||||
NVN_API(nvnCommandBufferSetPolygonOffsetClamp) {
|
NVN_API(nvnCommandBufferSetPolygonOffsetClamp) {
|
||||||
*REC(cmd_of(c), OP_POLY_OFFSET, p_poly_offset) = (p_poly_offset){arg_s(c, 0), arg_s(c, 1), arg_s(c, 2)};
|
*REC(cmd_of(c), OP_POLY_OFFSET, p_poly_offset) = (p_poly_offset){arg_s(c, 0), arg_s(c, 1), arg_s(c, 2)};
|
||||||
// NX2NAVI_POLY_OFFSET_LOG: what the game asks for, to tell a decal that relies on the offset from one that does not
|
// NX2NAVI_POLY_OFFSET_LOG: what the game asks for, to tell a decal that relies on the offset from one that does not
|
||||||
static int logged;
|
static int logged, on = -1; // the environment read once: this runs for every offset the game sets
|
||||||
|
if (on < 0) on = getenv("NX2NAVI_POLY_OFFSET_LOG") != NULL;
|
||||||
float f = (float)arg_s(c, 0), u = (float)arg_s(c, 1), cl = (float)arg_s(c, 2);
|
float f = (float)arg_s(c, 0), u = (float)arg_s(c, 1), cl = (float)arg_s(c, 2);
|
||||||
if (getenv("NX2NAVI_POLY_OFFSET_LOG") && logged < 24 && (f != 0.0f || u != 0.0f)) {
|
if (on && logged < 24 && (f != 0.0f || u != 0.0f)) {
|
||||||
logged++;
|
logged++;
|
||||||
rt_log("nvn: polygon offset factor %.3f units %.3f clamp %.3f", f, u, cl);
|
rt_log("nvn: polygon offset factor %.3f units %.3f clamp %.3f", f, u, cl);
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -243,7 +243,7 @@ static char *lang(void) {
|
|||||||
return s;
|
return s;
|
||||||
}
|
}
|
||||||
|
|
||||||
static void set_env(const char *name, const char *value) { plat_setenv(name, value); } // NULL removes it
|
static void set_env(const char *name, const char *value) { cfg_setenv(name, value); } // NULL removes it
|
||||||
|
|
||||||
static void probe_oe(void) {
|
static void probe_oe(void) {
|
||||||
char *keep_lang = cfg_get("NX2NAVI_LANG") ? strdup(cfg_get("NX2NAVI_LANG")) : NULL;
|
char *keep_lang = cfg_get("NX2NAVI_LANG") ? strdup(cfg_get("NX2NAVI_LANG")) : NULL;
|
||||||
@@ -956,9 +956,9 @@ static void probe_main(Cpu *c) {
|
|||||||
static uint32_t run_child(const char *mode, const char *env, char *out, size_t cap) {
|
static uint32_t run_child(const char *mode, const char *env, char *out, size_t cap) {
|
||||||
char name[64] = "";
|
char name[64] = "";
|
||||||
const char *eq = env ? strchr(env, '=') : NULL;
|
const char *eq = env ? strchr(env, '=') : NULL;
|
||||||
if (eq) snprintf(name, sizeof name, "%.*s", (int)(eq - env), env), plat_setenv(name, eq + 1);
|
if (eq) snprintf(name, sizeof name, "%.*s", (int)(eq - env), env), cfg_setenv(name, eq + 1);
|
||||||
int code = plat_run_self(CHILD_ENV, mode, out, cap, 0);
|
int code = plat_run_self(CHILD_ENV, mode, out, cap, 0);
|
||||||
if (eq) plat_setenv(name, NULL);
|
if (eq) cfg_setenv(name, NULL);
|
||||||
if (code < 0) rt_fatal("probe-services: cannot start the %s child", mode);
|
if (code < 0) rt_fatal("probe-services: cannot start the %s child", mode);
|
||||||
return (uint32_t)code;
|
return (uint32_t)code;
|
||||||
}
|
}
|
||||||
|
|||||||
@@ -1764,7 +1764,18 @@ static uint16_t pool_kind_type(int k) {
|
|||||||
}
|
}
|
||||||
|
|
||||||
#define POOL_WBATCH 512
|
#define POOL_WBATCH 512
|
||||||
#define POOL_CREATE_BUDGET 64 // texture entries a pool sync may create (images and uploads), the rest next time
|
// Texture entries a pool sync may create (images and uploads), the rest at the next sync (NX2NAVI_POOL_CREATE_BUDGET,
|
||||||
|
// default 16). The sync holds the texture lock throughout, and with 64 streaming in new textures made frames of 20-40 ms
|
||||||
|
// with the replay and other threads waiting on that lock (24 ms of holds per slow frame in a dense area); 16 brought
|
||||||
|
// that to 5 ms with no pop-in a player could see. The slots it leaves keep their stand-in until the next sync.
|
||||||
|
static int pool_create_budget(void) {
|
||||||
|
static int n = -1;
|
||||||
|
if (n < 0) {
|
||||||
|
n = cfg_int("NX2NAVI_POOL_CREATE_BUDGET");
|
||||||
|
if (n < 1) n = 1;
|
||||||
|
}
|
||||||
|
return n;
|
||||||
|
}
|
||||||
static VkWriteDescriptorSet pool_w[POOL_WBATCH];
|
static VkWriteDescriptorSet pool_w[POOL_WBATCH];
|
||||||
static VkDescriptorImageInfo pool_ii[POOL_WBATCH];
|
static VkDescriptorImageInfo pool_ii[POOL_WBATCH];
|
||||||
static uint32_t pool_nw;
|
static uint32_t pool_nw;
|
||||||
@@ -1994,7 +2005,7 @@ static void pool_sync_entries(VkExec *ex) {
|
|||||||
}
|
}
|
||||||
int retry = 0; // slots whose texture the creation budget left: filled again by the next sync
|
int retry = 0; // slots whose texture the creation budget left: filled again by the next sync
|
||||||
if (fresh || gen != PL.gen || ep != PL.epoch || PL.retry) {
|
if (fresh || gen != PL.gen || ep != PL.epoch || PL.retry) {
|
||||||
vk_texture_create_budget_locked(POOL_CREATE_BUDGET);
|
vk_texture_create_budget_locked(pool_create_budget());
|
||||||
// Only a slot change since the last sync (no new kinds, no new submission, nothing left over): the slots that
|
// Only a slot change since the last sync (no new kinds, no new submission, nothing left over): the slots that
|
||||||
// changed (vk_texture_dirty_slots_locked), not the whole table
|
// changed (vk_texture_dirty_slots_locked), not the whole table
|
||||||
PoolDirty pd = {ex, used, n, 0};
|
PoolDirty pd = {ex, used, n, 0};
|
||||||
@@ -3120,7 +3131,8 @@ static int draw_skipped(const VkExec *ex, int mesh, int why) {
|
|||||||
|
|
||||||
// NX2NAVI_SKIP_PROG=<serial>[,<serial>...]: diagnostics. Drops every draw whose program serial is listed, so something
|
// NX2NAVI_SKIP_PROG=<serial>[,<serial>...]: diagnostics. Drops every draw whose program serial is listed, so something
|
||||||
// on screen can be attributed to one program by elimination: pass the programs of the pass it appears in, then half of
|
// on screen can be attributed to one program by elimination: pass the programs of the pass it appears in, then half of
|
||||||
// them, and so on. Environment only, and nothing is skipped without it.
|
// them, and so on. Environment only, and nothing is skipped without it. Read once: a getenv on every draw scanned the
|
||||||
|
// whole environment block and was a sixth of the replay thread's samples in a play profile.
|
||||||
static int skip_prog_list[32], n_skip_prog = -1;
|
static int skip_prog_list[32], n_skip_prog = -1;
|
||||||
static int skip_prog_wanted(uint64_t serial) {
|
static int skip_prog_wanted(uint64_t serial) {
|
||||||
if (n_skip_prog < 0) {
|
if (n_skip_prog < 0) {
|
||||||
@@ -3157,7 +3169,7 @@ static int prepare_draw_ex(VkExec *ex, int prim, int32_t count, int restart, int
|
|||||||
VkRect2D sc = vk_exec_scissor(ex);
|
VkRect2D sc = vk_exec_scissor(ex);
|
||||||
if (!sc.extent.width || !sc.extent.height) return draw_skipped(ex, mesh, SK_SCISSOR);
|
if (!sc.extent.width || !sc.extent.height) return draw_skipped(ex, mesh, SK_SCISSOR);
|
||||||
if (!ex->prog) return draw_skipped(ex, mesh, SK_NO_PROGRAM);
|
if (!ex->prog) return draw_skipped(ex, mesh, SK_NO_PROGRAM);
|
||||||
if (getenv("NX2NAVI_SKIP_PROG") && skip_prog_wanted(ex->prog->serial)) return draw_skipped(ex, mesh, SK_DISABLED);
|
if (n_skip_prog && skip_prog_wanted(ex->prog->serial)) return draw_skipped(ex, mesh, SK_DISABLED); // -1 until read
|
||||||
int has_vs, has_fs, vs_wait = 0, fs_wait = 0, memo = mesh ? 0 : shader_memo_on();
|
int has_vs, has_fs, vs_wait = 0, fs_wait = 0, memo = mesh ? 0 : shader_memo_on();
|
||||||
int has_ts = 0, ts_wait = 0, vst = mesh ? NVN_STAGE_MESH : NVN_STAGE_VS;
|
int has_ts = 0, ts_wait = 0, vst = mesh ? NVN_STAGE_MESH : NVN_STAGE_VS;
|
||||||
const GfxShader *vs, *fs, *ts = NULL;
|
const GfxShader *vs, *fs, *ts = NULL;
|
||||||
|
|||||||
@@ -128,7 +128,7 @@ static int test_present(const GfxBackend *b, uint8_t *guest, int *w_out, int *h_
|
|||||||
|
|
||||||
uint64_t frames = gfx_stats().frames;
|
uint64_t frames = gfx_stats().frames;
|
||||||
// the exact colour check needs the bilinear blit: FSR's approximate reciprocals move a flat colour by 1/255
|
// the exact colour check needs the bilinear blit: FSR's approximate reciprocals move a flat colour by 1/255
|
||||||
plat_setenv("NX2NAVI_UPSCALER", "bilinear");
|
cfg_setenv("NX2NAVI_UPSCALER", "bilinear");
|
||||||
vk_present_capture(1);
|
vk_present_capture(1);
|
||||||
const int crop[4] = {0, 0, TEX_W, TEX_H};
|
const int crop[4] = {0, 0, TEX_W, TEX_H};
|
||||||
b->present(&t, crop, 0);
|
b->present(&t, crop, 0);
|
||||||
|
|||||||
@@ -446,7 +446,9 @@ static Tex *create_tex(const tex_t *t, const TexKey *k, int defer_init) {
|
|||||||
return NULL;
|
return NULL;
|
||||||
}
|
}
|
||||||
// NX2NAVI_ASTC_BC_PROBE (environment; diagnostics only): measure what a data-driven alpha rule would compress
|
// NX2NAVI_ASTC_BC_PROBE (environment; diagnostics only): measure what a data-driven alpha rule would compress
|
||||||
if (f.astc_bw && getenv("NX2NAVI_ASTC_BC_PROBE")) astc_probe_alpha(t, &f);
|
static int bc_probe = -1; // read once: this runs for every texture created
|
||||||
|
if (bc_probe < 0) bc_probe = getenv("NX2NAVI_ASTC_BC_PROBE") != NULL;
|
||||||
|
if (f.astc_bw && bc_probe) astc_probe_alpha(t, &f);
|
||||||
nvn_texlayout L;
|
nvn_texlayout L;
|
||||||
nvn_tex_layout(d, &L);
|
nvn_tex_layout(d, &L);
|
||||||
uint32_t w = umax(d->width, 1), h = umax(d->height, 1), depth = 1, layers = 1;
|
uint32_t w = umax(d->width, 1), h = umax(d->height, 1), depth = 1, layers = 1;
|
||||||
|
|||||||
Reference in New Issue
Block a user